{"title":"aRacer ECUs \u0026 Race Electronics","description":"\u003cp\u003eMala Racing is an authorized dealer for aRacer SpeedTek: full-replacement programmable ECUs for the Honda Grom, Monkey, CRF110F \/ CRF125F, CBR300R and CRF300L, Kawasaki Z125 Pro and Ninja 400, Yamaha Zuma, R3 \/ MT-03, MT-07 and R7, and Benelli TNT 135, plus the wideband AFR modules, displays, quick shifters, switches and harnesses that go with them. Tune from your phone over Wi-Fi, run AutoTune with a wideband, and get U.S.-based support. Closed-course competition use only.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eShop by category:\u003c\/strong\u003e \u003ca href=\"\/collections\/aracer-ecus\"\u003eAll ECUs\u003c\/a\u003e · ECUs for \u003ca href=\"\/collections\/aracer-ecus-honda\"\u003eHonda\u003c\/a\u003e, \u003ca href=\"\/collections\/aracer-ecus-kawasaki\"\u003eKawasaki\u003c\/a\u003e, \u003ca href=\"\/collections\/aracer-ecus-yamaha\"\u003eYamaha\u003c\/a\u003e or \u003ca href=\"\/collections\/aracer-ecus-benelli\"\u003eBenelli\u003c\/a\u003e · \u003ca href=\"\/collections\/aracer-wideband-afr\"\u003eWideband AFR Modules\u003c\/a\u003e · \u003ca href=\"\/collections\/aracer-displays-gauges\"\u003eDisplays \u0026amp; Gauges\u003c\/a\u003e · \u003ca href=\"\/collections\/aracer-quick-shifters\"\u003eQuick Shifters\u003c\/a\u003e · \u003ca href=\"\/collections\/aracer-switches-sensors-ignition\"\u003eSwitches, Sensors \u0026amp; Ignition\u003c\/a\u003e · \u003ca href=\"\/collections\/aracer-cables-tuning-tools\"\u003eCables \u0026amp; Tuning Tools\u003c\/a\u003e\u003c\/p\u003e","products":[{"product_id":"aracer-rc-mini-xx-ecu-honda-grom-125-msx-125-2021","title":"aRacer RC Mini XX ECU – Honda Grom 125 \/ MSX 125 2021+","description":"\u003cp\u003eThe 2021+ Grom is the current five-speed bike and the one most riders are racing in the mini-moto classes at the kart tracks we ride; this is the ECU that unlocks it.\u003c\/p\u003e\u003cp\u003eThe \u003cstrong\u003eaRacer RC Mini XX\u003c\/strong\u003e is the current-generation Mini: a full-replacement programmable ECU for small-displacement EFI singles, with a faster processor, a stronger 360° Wi-Fi antenna, an RGB status LED and a Quick Burn setup that now takes under a minute. It plugs into the factory harness in place of the stock ECU — not a piggyback — and opens up the fuel and ignition maps the factory unit locks away.\u003c\/p\u003e\u003cp\u003eTune from your phone over Wi-Fi with the aRacer X-Tune app, or go deeper on a PC with SpeedTuningX through the PRO-LINK adapter. \u003cstrong\u003eQuick Burn\u003c\/strong\u003e pulls the latest base calibration for your bike from aRacer’s database, with free calibrations for the common bolt-ons (exhaust, intake, big-bore kits). Stock and lightly modified bikes run well on that alone; add an AF2 or AF3 wideband module and the ECU can AutoTune and run closed-loop on your actual engine.\u003c\/p\u003e\u003ch3\u003eWhat it does\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eFull replacement of the factory ECU; plug-in installation on the stock harness\u003c\/li\u003e\n\u003cli\u003eCurrent-generation Mini hardware: faster MCU, stronger Wi-Fi, RGB status LED, injector tolerance correction\u003c\/li\u003e\n\u003cli\u003eOpen fuel, ignition and target-AFR maps with rev-limit and start\/idle control\u003c\/li\u003e\n\u003cli\u003eWi-Fi tuning from the aRacer X-Tune app (iOS \/ Android) or SpeedTuningX on PC\u003c\/li\u003e\n\u003cli\u003eQuick Burn base calibrations and free bolt-on calibrations from the aRacer database\u003c\/li\u003e\n\u003cli\u003eAutoTune and wideband closed-loop with an AF2 \/ AF3 module\u003c\/li\u003e\n\u003cli\u003eWorks with the R Button, DG2 gauge and Sport D display\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cp\u003eFits the 2021-and-later Honda Grom 125 (MSX 125 in other markets) only. The 2013–2020 bikes use a different connector — see the 2012–2016 and SF 2016–2020 Mini XX listings. The ECU connector and calibration are specific to the model and year, so send us your year and VIN if you are unsure.\u003c\/p\u003e\u003ch3\u003eSetup and tuning\u003c\/h3\u003e\u003cp\u003ePlug the ECU into the factory harness, connect to it over Wi-Fi with the free aRacer X-Tune app and run Quick Burn to load the base calibration for your bike and mods. For full map access on a PC you need SpeedTuningX and the PRO-LINK USB adapter (sold separately). Heavily modified engines should be finished on a dyno by a tuner; aRacer’s U.S. team can also remote-tune from logs.\u003c\/p\u003e\u003ch3\u003eWorks with\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/products\/aracer-af3-wideband-afr-module\"\u003eaRacer AF3 Wideband AFR Module\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/aracer-pro-link-usb-communication-adapter\"\u003eaRacer PRO-LINK USB Communication Adapter\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/aracer-dg2-multi-function-display-gauge\"\u003eaRacer DG2 Multi-Function Display Gauge\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/aracer-r-button\"\u003eaRacer R Button\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/aracer-sport-d-racing-display\"\u003eaRacer Sport D Racing Display\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/aracer-hi-power-max-spark-coil\"\u003eaRacer Hi Power MAX Spark Coil\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart number:\u003c\/strong\u003e PA-B602100AX\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePlatform:\u003c\/strong\u003e aRacer RC Mini XX\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApplication:\u003c\/strong\u003e Honda Grom 125 \/ MSX 125 2021+\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Full-replacement programmable ECU (plug-in, not piggyback)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnectivity:\u003c\/strong\u003e Built-in Wi-Fi to the aRacer X-Tune app; PC via PRO-LINK\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIn the box:\u003c\/strong\u003e ECU with activation details for the X-Tune app (keep them with the bike)\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eProduct images are aRacer’s renders and may show the same ECU housing as a related model.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eClosed-course competition use only.\u003c\/strong\u003e aRacer ECUs and race electronics are sold for closed-course competition, off-road, dyno and development use. They are not CARB-approved or EPA-certified for pollution-controlled vehicles on public roads. You are responsible for complying with the laws that apply to you.\u003c\/p\u003e\u003ch3\u003eDealer support\u003c\/h3\u003e\u003cp\u003eMala Racing is an authorized aRacer SpeedTek dealer. Orders ship from California, and U.S.-based technical support, calibration help and the aRacer calibration database are available through aRacer ECU R\u0026amp;D of America. Not sure about fitment or which accessories you need? Email \u003ca href=\"mailto:malaracingllc@gmail.com\"\u003emalaracingllc@gmail.com\u003c\/a\u003e with your bike, year and mods before you order.\u003c\/p\u003e\u003cp style=\"font-size:0.85em\"\u003e\u003cstrong\u003eCalifornia Proposition 65 WARNING:\u003c\/strong\u003e This product can expose you to chemicals including lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to \u003ca href=\"https:\/\/www.P65Warnings.ca.gov\" rel=\"nofollow\"\u003ewww.P65Warnings.ca.gov\u003c\/a\u003e.\u003c\/p\u003e","brand":"aRacer","offers":[{"title":"Default Title","offer_id":67824958799972,"sku":"PA-B602100AX","price":499.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0656\/3771\/1972\/files\/minixx_grom21.png?v=1792818276"},{"product_id":"aracer-rc-mini-x-ecu-honda-grom-sf-125-msx-sf-125-2016-2020","title":"aRacer RC Mini X ECU – Honda Grom SF 125 \/ MSX SF 125 2016–2020","description":"\u003cp\u003eThe SF-generation Grom is still one of the cheapest race bikes you can build; this is the previous-generation Mini for it, at the same price as the Mini XX.\u003c\/p\u003e\u003cp\u003eThe \u003cstrong\u003eaRacer RC Mini X\u003c\/strong\u003e is a full-replacement programmable ECU for small-displacement EFI singles. It plugs into the factory harness in place of the stock ECU — it is not a piggyback — and opens up the fuel and ignition maps the factory unit locks away. Tune from your phone over Wi-Fi with the aRacer X-Tune app, or go deeper on a PC with SpeedTuningX through the PRO-LINK adapter.\u003c\/p\u003e\u003cp\u003eEvery ECU starts with a \u003cstrong\u003eQuick Burn\u003c\/strong\u003e: it pulls the latest base calibration for your bike from aRacer’s database in about a minute, with free calibrations for the common bolt-ons (exhaust, intake, big-bore kits). Stock and lightly modified bikes run well on that alone. Add an AF2 or AF3 wideband module and the ECU can AutoTune and run closed-loop on your actual engine.\u003c\/p\u003e\u003ch3\u003eWhat it does\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eFull replacement of the factory ECU; plug-in installation on the stock harness\u003c\/li\u003e\n\u003cli\u003eOpen fuel and ignition maps with rev-limit and start\/idle control\u003c\/li\u003e\n\u003cli\u003eWi-Fi tuning from the aRacer X-Tune app (iOS \/ Android) or SpeedTuningX on PC\u003c\/li\u003e\n\u003cli\u003eQuick Burn base calibrations and free bolt-on calibrations from the aRacer database\u003c\/li\u003e\n\u003cli\u003eAutoTune and wideband closed-loop with an AF2 \/ AF3 module\u003c\/li\u003e\n\u003cli\u003eReal-time engine monitoring in the app\u003c\/li\u003e\n\u003cli\u003eWorks with the R Button, DG2 gauge and Sport D display\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cp\u003eFits the 2016–2020 Honda Grom SF 125 \/ MSX SF 125. Not for the 2013–2015 first-generation bike or the 2021+ five-speed. The ECU connector and calibration are specific to the model and year, so send us your year and VIN if you are unsure.\u003c\/p\u003e\u003ch3\u003eSetup and tuning\u003c\/h3\u003e\u003cp\u003ePlug the ECU into the factory harness, connect to it over Wi-Fi with the free aRacer X-Tune app and run Quick Burn to load the base calibration for your bike and mods. For full map access on a PC you need SpeedTuningX and the PRO-LINK USB adapter (sold separately). Heavily modified engines should be finished on a dyno by a tuner; aRacer’s U.S. team can also remote-tune from logs.\u003c\/p\u003e\u003ch3\u003eWorks with\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/products\/aracer-af3-wideband-afr-module\"\u003eaRacer AF3 Wideband AFR Module\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/aracer-pro-link-usb-communication-adapter\"\u003eaRacer PRO-LINK USB Communication Adapter\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/aracer-dg2-multi-function-display-gauge\"\u003eaRacer DG2 Multi-Function Display Gauge\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/aracer-r-button\"\u003eaRacer R Button\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/aracer-sport-d-racing-display\"\u003eaRacer Sport D Racing Display\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/aracer-hi-power-max-spark-coil\"\u003eaRacer Hi Power MAX Spark Coil\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart number:\u003c\/strong\u003e PA-CX088A0\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePlatform:\u003c\/strong\u003e aRacer RC Mini X\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApplication:\u003c\/strong\u003e Honda Grom SF 125 \/ MSX SF 125 2016–2020\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Full-replacement programmable ECU (plug-in, not piggyback)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnectivity:\u003c\/strong\u003e Built-in Wi-Fi to the aRacer X-Tune app; PC via PRO-LINK\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIn the box:\u003c\/strong\u003e ECU with activation details for the X-Tune app (keep them with the bike)\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eProduct images are aRacer’s renders and may show the same ECU housing as a related model.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eClosed-course competition use only.\u003c\/strong\u003e aRacer ECUs and race electronics are sold for closed-course competition, off-road, dyno and development use. They are not CARB-approved or EPA-certified for pollution-controlled vehicles on public roads. You are responsible for complying with the laws that apply to you.\u003c\/p\u003e\u003ch3\u003eDealer support\u003c\/h3\u003e\u003cp\u003eMala Racing is an authorized aRacer SpeedTek dealer. Orders ship from California, and U.S.-based technical support, calibration help and the aRacer calibration database are available through aRacer ECU R\u0026amp;D of America. Not sure about fitment or which accessories you need? Email \u003ca href=\"mailto:malaracingllc@gmail.com\"\u003emalaracingllc@gmail.com\u003c\/a\u003e with your bike, year and mods before you order.\u003c\/p\u003e\u003cp style=\"font-size:0.85em\"\u003e\u003cstrong\u003eCalifornia Proposition 65 WARNING:\u003c\/strong\u003e This product can expose you to chemicals including lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to \u003ca href=\"https:\/\/www.P65Warnings.ca.gov\" rel=\"nofollow\"\u003ewww.P65Warnings.ca.gov\u003c\/a\u003e.\u003c\/p\u003e","brand":"aRacer","offers":[{"title":"Default Title","offer_id":67824972464228,"sku":"PA-CX088A0","price":499.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0656\/3771\/1972\/files\/2016grom-3.png?v=1792818365"},{"product_id":"aracer-rc-mini-x-ecu-honda-crf300l-crf300l-rally-2021","title":"aRacer RC Mini X ECU – Honda CRF300L \/ CRF300L Rally 2021+","description":"\u003cp\u003eFor the CRF300L and CRF300L Rally — the usual starting point is a Quick Burn calibration for the exhaust and airbox mods, with a wideband for anything further.\u003c\/p\u003e\u003cp\u003eThe \u003cstrong\u003eaRacer RC Mini X\u003c\/strong\u003e is a full-replacement programmable ECU for small-displacement EFI singles. It plugs into the factory harness in place of the stock ECU — it is not a piggyback — and opens up the fuel and ignition maps the factory unit locks away. Tune from your phone over Wi-Fi with the aRacer X-Tune app, or go deeper on a PC with SpeedTuningX through the PRO-LINK adapter.\u003c\/p\u003e\u003cp\u003eEvery ECU starts with a \u003cstrong\u003eQuick Burn\u003c\/strong\u003e: it pulls the latest base calibration for your bike from aRacer’s database in about a minute, with free calibrations for the common bolt-ons (exhaust, intake, big-bore kits). Stock and lightly modified bikes run well on that alone. Add an AF2 or AF3 wideband module and the ECU can AutoTune and run closed-loop on your actual engine.\u003c\/p\u003e\u003ch3\u003eWhat it does\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eFull replacement of the factory ECU; plug-in installation on the stock harness\u003c\/li\u003e\n\u003cli\u003eOpen fuel and ignition maps with rev-limit and start\/idle control\u003c\/li\u003e\n\u003cli\u003eWi-Fi tuning from the aRacer X-Tune app (iOS \/ Android) or SpeedTuningX on PC\u003c\/li\u003e\n\u003cli\u003eQuick Burn base calibrations and free bolt-on calibrations from the aRacer database\u003c\/li\u003e\n\u003cli\u003eAutoTune and wideband closed-loop with an AF2 \/ AF3 module\u003c\/li\u003e\n\u003cli\u003eReal-time engine monitoring in the app\u003c\/li\u003e\n\u003cli\u003eWorks with the R Button, DG2 gauge and Sport D display\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cp\u003eFits the 2021-and-later Honda CRF300L and CRF300L Rally. Confirm model year and market version before ordering. The ECU connector and calibration are specific to the model and year, so send us your year and VIN if you are unsure.\u003c\/p\u003e\u003ch3\u003eSetup and tuning\u003c\/h3\u003e\u003cp\u003ePlug the ECU into the factory harness, connect to it over Wi-Fi with the free aRacer X-Tune app and run Quick Burn to load the base calibration for your bike and mods. For full map access on a PC you need SpeedTuningX and the PRO-LINK USB adapter (sold separately). Heavily modified engines should be finished on a dyno by a tuner; aRacer’s U.S. team can also remote-tune from logs.\u003c\/p\u003e\u003ch3\u003eWorks with\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/products\/aracer-af3-wideband-afr-module\"\u003eaRacer AF3 Wideband AFR Module\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/aracer-pro-link-usb-communication-adapter\"\u003eaRacer PRO-LINK USB Communication Adapter\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/aracer-dg2-multi-function-display-gauge\"\u003eaRacer DG2 Multi-Function Display Gauge\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/aracer-r-button\"\u003eaRacer R Button\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/aracer-sport-d-racing-display\"\u003eaRacer Sport D Racing Display\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/aracer-hi-power-max-spark-coil\"\u003eaRacer Hi Power MAX Spark Coil\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart number:\u003c\/strong\u003e PA-CX130A0\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePlatform:\u003c\/strong\u003e aRacer RC Mini X\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApplication:\u003c\/strong\u003e Honda CRF300L \/ CRF300L Rally 2021+\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Full-replacement programmable ECU (plug-in, not piggyback)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnectivity:\u003c\/strong\u003e Built-in Wi-Fi to the aRacer X-Tune app; PC via PRO-LINK\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIn the box:\u003c\/strong\u003e ECU with activation details for the X-Tune app (keep them with the bike)\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eProduct images are aRacer’s renders and may show the same ECU housing as a related model.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eClosed-course competition use only.\u003c\/strong\u003e aRacer ECUs and race electronics are sold for closed-course competition, off-road, dyno and development use. They are not CARB-approved or EPA-certified for pollution-controlled vehicles on public roads. You are responsible for complying with the laws that apply to you.\u003c\/p\u003e\u003ch3\u003eDealer support\u003c\/h3\u003e\u003cp\u003eMala Racing is an authorized aRacer SpeedTek dealer. Orders ship from California, and U.S.-based technical support, calibration help and the aRacer calibration database are available through aRacer ECU R\u0026amp;D of America. Not sure about fitment or which accessories you need? Email \u003ca href=\"mailto:malaracingllc@gmail.com\"\u003emalaracingllc@gmail.com\u003c\/a\u003e with your bike, year and mods before you order.\u003c\/p\u003e\u003cp style=\"font-size:0.85em\"\u003e\u003cstrong\u003eCalifornia Proposition 65 WARNING:\u003c\/strong\u003e This product can expose you to chemicals including lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to \u003ca href=\"https:\/\/www.P65Warnings.ca.gov\" rel=\"nofollow\"\u003ewww.P65Warnings.ca.gov\u003c\/a\u003e.\u003c\/p\u003e","brand":"aRacer","offers":[{"title":"Default Title","offer_id":67824973414500,"sku":"PA-CX130A0","price":499.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0656\/3771\/1972\/files\/2016grom-3_2a138516-6bcb-4c1f-b691-e849e54acda4.png?v=1792818370"},{"product_id":"aracer-rc-super-xx-pro-ecu-honda-crf110f-2019","title":"aRacer RC Super XX PRO ECU – Honda CRF110F 2019+","description":"\u003cp\u003eThe CRF110F is a pit-bike and mini-moto race platform in its own right; the Super XX PRO brings race-level control, logging and accessory support to it.\u003c\/p\u003e\u003cp\u003eThe \u003cstrong\u003eaRacer RC Super XX PRO\u003c\/strong\u003e is the latest generation of aRacer’s race-level ECU. It does everything the Mini does — full replacement of the factory ECU, open fuel and ignition maps, Wi-Fi tuning from the X-Tune app or SpeedTuningX on PC, Quick Burn calibrations, AutoTune with a wideband — and adds the hardware and feature set a race bike needs: a faster multi-core processor, finer ignition resolution, more onboard logging memory, an IP67 connection and support for aRacer’s race accessories.\u003c\/p\u003e\u003cp\u003eThat means the \u003cstrong\u003eQSR V2 quick shifter\u003c\/strong\u003e, the \u003cstrong\u003eRace Panel 2\u003c\/strong\u003e and \u003cstrong\u003eiMode 5\u003c\/strong\u003e touchscreen displays, the \u003cstrong\u003e3-Button Race Switch\u003c\/strong\u003e and \u003cstrong\u003eVSS speed sensors\u003c\/strong\u003e for Race Module functions such as launch control, pit limiter and on-the-fly map switching. Mini X \/ Mini XX ECUs cannot run those accessories.\u003c\/p\u003e\u003ch3\u003eWhat it does\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eFull replacement of the factory ECU; plug-in installation on the stock harness\u003c\/li\u003e\n\u003cli\u003eLatest-generation Super hardware: multi-core MCU, fine ignition resolution, expanded Fly Recorder logging, IP67 connection\u003c\/li\u003e\n\u003cli\u003eOpen fuel and ignition maps with rev-limit, start\/idle and backfire control\u003c\/li\u003e\n\u003cli\u003eWi-Fi tuning from the aRacer X-Tune app (iOS \/ Android) or SpeedTuningX on PC\u003c\/li\u003e\n\u003cli\u003eQuick Burn base calibrations and free bolt-on calibrations from the aRacer database\u003c\/li\u003e\n\u003cli\u003eAutoTune and wideband closed-loop with an AF2 \/ AF3 module\u003c\/li\u003e\n\u003cli\u003eSupports QSR V2 quick shifter, Race Panel 2, iMode 5, 3-Button Race Switch and VSS (functions vary by application)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cp\u003eFits the 2019-and-later fuel-injected Honda CRF110F. Not for the carbureted 2013–2018 bikes. The ECU connector and calibration are specific to the model and year, so send us your year and VIN if you are unsure.\u003c\/p\u003e\u003ch3\u003eSetup and tuning\u003c\/h3\u003e\u003cp\u003ePlug the ECU into the factory harness, connect to it over Wi-Fi with the free aRacer X-Tune app and run Quick Burn to load the base calibration for your bike and mods. For full map access on a PC you need SpeedTuningX and the PRO-LINK USB adapter (sold separately). Heavily modified engines should be finished on a dyno by a tuner; aRacer’s U.S. team can also remote-tune from logs.\u003c\/p\u003e\u003ch3\u003eWorks with\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/products\/aracer-qsr-v2-quick-shift-race-v2\"\u003eaRacer QSR V2 Quick Shifter\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/aracer-race-panel-2\"\u003eaRacer Race Panel 2\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/aracer-imode-5-controller\"\u003eaRacer iMode 5 Controller\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/aracer-af3-wideband-afr-module\"\u003eaRacer AF3 Wideband AFR Module\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/aracer-pro-link-usb-communication-adapter\"\u003eaRacer PRO-LINK USB Communication Adapter\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/aracer-3-button-race-switch\"\u003eaRacer 3-Button Race Switch\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/aracer-r-button\"\u003eaRacer R Button\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/aracer-dg2-multi-function-display-gauge\"\u003eaRacer DG2 Multi-Function Display Gauge\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart number:\u003c\/strong\u003e PA-B302230DB\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePlatform:\u003c\/strong\u003e aRacer RC Super XX PRO\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApplication:\u003c\/strong\u003e Honda CRF110F 2019+\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Full-replacement programmable ECU (plug-in, not piggyback)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnectivity:\u003c\/strong\u003e Built-in Wi-Fi to the aRacer X-Tune app; PC via PRO-LINK\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIn the box:\u003c\/strong\u003e ECU with activation details for the X-Tune app (keep them with the bike)\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eProduct images are aRacer’s renders and may show the same ECU housing as a related model.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eClosed-course competition use only.\u003c\/strong\u003e aRacer ECUs and race electronics are sold for closed-course competition, off-road, dyno and development use. They are not CARB-approved or EPA-certified for pollution-controlled vehicles on public roads. You are responsible for complying with the laws that apply to you.\u003c\/p\u003e\u003ch3\u003eDealer support\u003c\/h3\u003e\u003cp\u003eMala Racing is an authorized aRacer SpeedTek dealer. Orders ship from California, and U.S.-based technical support, calibration help and the aRacer calibration database are available through aRacer ECU R\u0026amp;D of America. Not sure about fitment or which accessories you need? Email \u003ca href=\"mailto:malaracingllc@gmail.com\"\u003emalaracingllc@gmail.com\u003c\/a\u003e with your bike, year and mods before you order.\u003c\/p\u003e\u003cp style=\"font-size:0.85em\"\u003e\u003cstrong\u003eCalifornia Proposition 65 WARNING:\u003c\/strong\u003e This product can expose you to chemicals including lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to \u003ca href=\"https:\/\/www.P65Warnings.ca.gov\" rel=\"nofollow\"\u003ewww.P65Warnings.ca.gov\u003c\/a\u003e.\u003c\/p\u003e","brand":"aRacer","offers":[{"title":"Default Title","offer_id":67824974037092,"sku":"PA-B302230DB","price":969.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0656\/3771\/1972\/files\/crf125f-3.png?v=1792818374"},{"product_id":"aracer-rc-super-xx-pro-ecu-honda-crf125f-2021","title":"aRacer RC Super XX PRO ECU – Honda CRF125F 2021+","description":"\u003cp\u003eRace-level engine management for the CRF125F, with quick shifter, Race Panel and Race Module support for a serious pit-bike build.\u003c\/p\u003e\u003cp\u003eThe \u003cstrong\u003eaRacer RC Super XX PRO\u003c\/strong\u003e is the latest generation of aRacer’s race-level ECU. It does everything the Mini does — full replacement of the factory ECU, open fuel and ignition maps, Wi-Fi tuning from the X-Tune app or SpeedTuningX on PC, Quick Burn calibrations, AutoTune with a wideband — and adds the hardware and feature set a race bike needs: a faster multi-core processor, finer ignition resolution, more onboard logging memory, an IP67 connection and support for aRacer’s race accessories.\u003c\/p\u003e\u003cp\u003eThat means the \u003cstrong\u003eQSR V2 quick shifter\u003c\/strong\u003e, the \u003cstrong\u003eRace Panel 2\u003c\/strong\u003e and \u003cstrong\u003eiMode 5\u003c\/strong\u003e touchscreen displays, the \u003cstrong\u003e3-Button Race Switch\u003c\/strong\u003e and \u003cstrong\u003eVSS speed sensors\u003c\/strong\u003e for Race Module functions such as launch control, pit limiter and on-the-fly map switching. Mini X \/ Mini XX ECUs cannot run those accessories.\u003c\/p\u003e\u003ch3\u003eWhat it does\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eFull replacement of the factory ECU; plug-in installation on the stock harness\u003c\/li\u003e\n\u003cli\u003eLatest-generation Super hardware: multi-core MCU, fine ignition resolution, expanded Fly Recorder logging, IP67 connection\u003c\/li\u003e\n\u003cli\u003eOpen fuel and ignition maps with rev-limit, start\/idle and backfire control\u003c\/li\u003e\n\u003cli\u003eWi-Fi tuning from the aRacer X-Tune app (iOS \/ Android) or SpeedTuningX on PC\u003c\/li\u003e\n\u003cli\u003eQuick Burn base calibrations and free bolt-on calibrations from the aRacer database\u003c\/li\u003e\n\u003cli\u003eAutoTune and wideband closed-loop with an AF2 \/ AF3 module\u003c\/li\u003e\n\u003cli\u003eSupports QSR V2 quick shifter, Race Panel 2, iMode 5, 3-Button Race Switch and VSS (functions vary by application)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cp\u003eFits the 2021-and-later Honda CRF125F \/ CRF125F Big Wheel. Confirm model year before ordering. The ECU connector and calibration are specific to the model and year, so send us your year and VIN if you are unsure.\u003c\/p\u003e\u003ch3\u003eSetup and tuning\u003c\/h3\u003e\u003cp\u003ePlug the ECU into the factory harness, connect to it over Wi-Fi with the free aRacer X-Tune app and run Quick Burn to load the base calibration for your bike and mods. For full map access on a PC you need SpeedTuningX and the PRO-LINK USB adapter (sold separately). Heavily modified engines should be finished on a dyno by a tuner; aRacer’s U.S. team can also remote-tune from logs.\u003c\/p\u003e\u003ch3\u003eWorks with\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/products\/aracer-qsr-v2-quick-shift-race-v2\"\u003eaRacer QSR V2 Quick Shifter\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/aracer-race-panel-2\"\u003eaRacer Race Panel 2\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/aracer-imode-5-controller\"\u003eaRacer iMode 5 Controller\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/aracer-af3-wideband-afr-module\"\u003eaRacer AF3 Wideband AFR Module\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/aracer-pro-link-usb-communication-adapter\"\u003eaRacer PRO-LINK USB Communication Adapter\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/aracer-3-button-race-switch\"\u003eaRacer 3-Button Race Switch\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/aracer-r-button\"\u003eaRacer R Button\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/aracer-dg2-multi-function-display-gauge\"\u003eaRacer DG2 Multi-Function Display Gauge\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart number:\u003c\/strong\u003e PA-B302300DB\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePlatform:\u003c\/strong\u003e aRacer RC Super XX PRO\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApplication:\u003c\/strong\u003e Honda CRF125F 2021+\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Full-replacement programmable ECU (plug-in, not piggyback)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnectivity:\u003c\/strong\u003e Built-in Wi-Fi to the aRacer X-Tune app; PC via PRO-LINK\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIn the box:\u003c\/strong\u003e ECU with activation details for the X-Tune app (keep them with the bike)\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eProduct images are aRacer’s renders and may show the same ECU housing as a related model.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eClosed-course competition use only.\u003c\/strong\u003e aRacer ECUs and race electronics are sold for closed-course competition, off-road, dyno and development use. They are not CARB-approved or EPA-certified for pollution-controlled vehicles on public roads. You are responsible for complying with the laws that apply to you.\u003c\/p\u003e\u003ch3\u003eDealer support\u003c\/h3\u003e\u003cp\u003eMala Racing is an authorized aRacer SpeedTek dealer. Orders ship from California, and U.S.-based technical support, calibration help and the aRacer calibration database are available through aRacer ECU R\u0026amp;D of America. Not sure about fitment or which accessories you need? Email \u003ca href=\"mailto:malaracingllc@gmail.com\"\u003emalaracingllc@gmail.com\u003c\/a\u003e with your bike, year and mods before you order.\u003c\/p\u003e\u003cp style=\"font-size:0.85em\"\u003e\u003cstrong\u003eCalifornia Proposition 65 WARNING:\u003c\/strong\u003e This product can expose you to chemicals including lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to \u003ca href=\"https:\/\/www.P65Warnings.ca.gov\" rel=\"nofollow\"\u003ewww.P65Warnings.ca.gov\u003c\/a\u003e.\u003c\/p\u003e","brand":"aRacer","offers":[{"title":"Default Title","offer_id":67824979771492,"sku":"PA-B302300DB","price":969.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0656\/3771\/1972\/files\/crf125f-3_c99ed13c-c632-42ca-9edb-62659a88f5a9.png?v=1792818414"},{"product_id":"aracer-rc-mini-x-ecu-honda-adv-150-2019","title":"aRacer RC Mini X ECU – Honda ADV 150 2019+","description":"\u003cp\u003eFull programmable engine management for the ADV 150 scooter — fuel, ignition and rev limit for exhaust, intake and big-bore builds.\u003c\/p\u003e\u003cp\u003eThe \u003cstrong\u003eaRacer RC Mini X\u003c\/strong\u003e is a full-replacement programmable ECU for small-displacement EFI singles. It plugs into the factory harness in place of the stock ECU — it is not a piggyback — and opens up the fuel and ignition maps the factory unit locks away. Tune from your phone over Wi-Fi with the aRacer X-Tune app, or go deeper on a PC with SpeedTuningX through the PRO-LINK adapter.\u003c\/p\u003e\u003cp\u003eEvery ECU starts with a \u003cstrong\u003eQuick Burn\u003c\/strong\u003e: it pulls the latest base calibration for your bike from aRacer’s database in about a minute, with free calibrations for the common bolt-ons (exhaust, intake, big-bore kits). Stock and lightly modified bikes run well on that alone. Add an AF2 or AF3 wideband module and the ECU can AutoTune and run closed-loop on your actual engine.\u003c\/p\u003e\u003ch3\u003eWhat it does\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eFull replacement of the factory ECU; plug-in installation on the stock harness\u003c\/li\u003e\n\u003cli\u003eOpen fuel and ignition maps with rev-limit and start\/idle control\u003c\/li\u003e\n\u003cli\u003eWi-Fi tuning from the aRacer X-Tune app (iOS \/ Android) or SpeedTuningX on PC\u003c\/li\u003e\n\u003cli\u003eQuick Burn base calibrations and free bolt-on calibrations from the aRacer database\u003c\/li\u003e\n\u003cli\u003eAutoTune and wideband closed-loop with an AF2 \/ AF3 module\u003c\/li\u003e\n\u003cli\u003eReal-time engine monitoring in the app\u003c\/li\u003e\n\u003cli\u003eWorks with the R Button, DG2 gauge and Sport D display\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cp\u003eFits the 2019-and-later Honda ADV 150. Confirm model year, market version and keyless \/ non-keyless version before ordering. The ECU connector and calibration are specific to the model and year, so send us your year and VIN if you are unsure.\u003c\/p\u003e\u003ch3\u003eSetup and tuning\u003c\/h3\u003e\u003cp\u003ePlug the ECU into the factory harness, connect to it over Wi-Fi with the free aRacer X-Tune app and run Quick Burn to load the base calibration for your bike and mods. For full map access on a PC you need SpeedTuningX and the PRO-LINK USB adapter (sold separately). Heavily modified engines should be finished on a dyno by a tuner; aRacer’s U.S. team can also remote-tune from logs.\u003c\/p\u003e\u003ch3\u003eWorks with\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/products\/aracer-af3-wideband-afr-module\"\u003eaRacer AF3 Wideband AFR Module\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/aracer-pro-link-usb-communication-adapter\"\u003eaRacer PRO-LINK USB Communication Adapter\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/aracer-dg2-multi-function-display-gauge\"\u003eaRacer DG2 Multi-Function Display Gauge\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/aracer-r-button\"\u003eaRacer R Button\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/aracer-sport-d-racing-display\"\u003eaRacer Sport D Racing Display\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/aracer-hi-power-max-spark-coil\"\u003eaRacer Hi Power MAX Spark Coil\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart number:\u003c\/strong\u003e PA-CX097A0\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePlatform:\u003c\/strong\u003e aRacer RC Mini X\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApplication:\u003c\/strong\u003e Honda ADV 150 2019+\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Full-replacement programmable ECU (plug-in, not piggyback)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnectivity:\u003c\/strong\u003e Built-in Wi-Fi to the aRacer X-Tune app; PC via PRO-LINK\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIn the box:\u003c\/strong\u003e ECU with activation details for the X-Tune app (keep them with the bike)\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eProduct images are aRacer’s renders and may show the same ECU housing as a related model.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eClosed-course competition use only.\u003c\/strong\u003e aRacer ECUs and race electronics are sold for closed-course competition, off-road, dyno and development use. They are not CARB-approved or EPA-certified for pollution-controlled vehicles on public roads. You are responsible for complying with the laws that apply to you.\u003c\/p\u003e\u003ch3\u003eDealer support\u003c\/h3\u003e\u003cp\u003eMala Racing is an authorized aRacer SpeedTek dealer. Orders ship from California, and U.S.-based technical support, calibration help and the aRacer calibration database are available through aRacer ECU R\u0026amp;D of America. Not sure about fitment or which accessories you need? Email \u003ca href=\"mailto:malaracingllc@gmail.com\"\u003emalaracingllc@gmail.com\u003c\/a\u003e with your bike, year and mods before you order.\u003c\/p\u003e\u003cp style=\"font-size:0.85em\"\u003e\u003cstrong\u003eCalifornia Proposition 65 WARNING:\u003c\/strong\u003e This product can expose you to chemicals including lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to \u003ca href=\"https:\/\/www.P65Warnings.ca.gov\" rel=\"nofollow\"\u003ewww.P65Warnings.ca.gov\u003c\/a\u003e.\u003c\/p\u003e","brand":"aRacer","offers":[{"title":"Default Title","offer_id":67824980623460,"sku":"PA-CX097A0","price":699.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0656\/3771\/1972\/files\/minixadv150.png?v=1792818418"},{"product_id":"aracer-rc-mini-x-ecu-honda-vario-150-2019","title":"aRacer RC Mini X ECU – Honda Vario 150 2019+","description":"\u003cp\u003eFull programmable engine management for the Vario 150 scooter — fuel, ignition and rev limit for exhaust, intake and big-bore builds.\u003c\/p\u003e\u003cp\u003eThe \u003cstrong\u003eaRacer RC Mini X\u003c\/strong\u003e is a full-replacement programmable ECU for small-displacement EFI singles. It plugs into the factory harness in place of the stock ECU — it is not a piggyback — and opens up the fuel and ignition maps the factory unit locks away. Tune from your phone over Wi-Fi with the aRacer X-Tune app, or go deeper on a PC with SpeedTuningX through the PRO-LINK adapter.\u003c\/p\u003e\u003cp\u003eEvery ECU starts with a \u003cstrong\u003eQuick Burn\u003c\/strong\u003e: it pulls the latest base calibration for your bike from aRacer’s database in about a minute, with free calibrations for the common bolt-ons (exhaust, intake, big-bore kits). Stock and lightly modified bikes run well on that alone. Add an AF2 or AF3 wideband module and the ECU can AutoTune and run closed-loop on your actual engine.\u003c\/p\u003e\u003ch3\u003eWhat it does\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eFull replacement of the factory ECU; plug-in installation on the stock harness\u003c\/li\u003e\n\u003cli\u003eOpen fuel and ignition maps with rev-limit and start\/idle control\u003c\/li\u003e\n\u003cli\u003eWi-Fi tuning from the aRacer X-Tune app (iOS \/ Android) or SpeedTuningX on PC\u003c\/li\u003e\n\u003cli\u003eQuick Burn base calibrations and free bolt-on calibrations from the aRacer database\u003c\/li\u003e\n\u003cli\u003eAutoTune and wideband closed-loop with an AF2 \/ AF3 module\u003c\/li\u003e\n\u003cli\u003eReal-time engine monitoring in the app\u003c\/li\u003e\n\u003cli\u003eWorks with the R Button, DG2 gauge and Sport D display\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cp\u003eFits the 2019-and-later Honda Vario 150. Confirm model year, market version and keyless \/ non-keyless version before ordering. The ECU connector and calibration are specific to the model and year, so send us your year and VIN if you are unsure.\u003c\/p\u003e\u003ch3\u003eSetup and tuning\u003c\/h3\u003e\u003cp\u003ePlug the ECU into the factory harness, connect to it over Wi-Fi with the free aRacer X-Tune app and run Quick Burn to load the base calibration for your bike and mods. For full map access on a PC you need SpeedTuningX and the PRO-LINK USB adapter (sold separately). Heavily modified engines should be finished on a dyno by a tuner; aRacer’s U.S. team can also remote-tune from logs.\u003c\/p\u003e\u003ch3\u003eWorks with\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/products\/aracer-af3-wideband-afr-module\"\u003eaRacer AF3 Wideband AFR Module\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/aracer-pro-link-usb-communication-adapter\"\u003eaRacer PRO-LINK USB Communication Adapter\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/aracer-dg2-multi-function-display-gauge\"\u003eaRacer DG2 Multi-Function Display Gauge\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/aracer-r-button\"\u003eaRacer R Button\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/aracer-sport-d-racing-display\"\u003eaRacer Sport D Racing Display\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/aracer-hi-power-max-spark-coil\"\u003eaRacer Hi Power MAX Spark Coil\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart number:\u003c\/strong\u003e PA-CX094A0\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePlatform:\u003c\/strong\u003e aRacer RC Mini X\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApplication:\u003c\/strong\u003e Honda Vario 150 2019+\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Full-replacement programmable ECU (plug-in, not piggyback)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnectivity:\u003c\/strong\u003e Built-in Wi-Fi to the aRacer X-Tune app; PC via PRO-LINK\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIn the box:\u003c\/strong\u003e ECU with activation details for the X-Tune app (keep them with the bike)\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eProduct images are aRacer’s renders and may show the same ECU housing as a related model.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eClosed-course competition use only.\u003c\/strong\u003e aRacer ECUs and race electronics are sold for closed-course competition, off-road, dyno and development use. They are not CARB-approved or EPA-certified for pollution-controlled vehicles on public roads. You are responsible for complying with the laws that apply to you.\u003c\/p\u003e\u003ch3\u003eDealer support\u003c\/h3\u003e\u003cp\u003eMala Racing is an authorized aRacer SpeedTek dealer. Orders ship from California, and U.S.-based technical support, calibration help and the aRacer calibration database are available through aRacer ECU R\u0026amp;D of America. Not sure about fitment or which accessories you need? Email \u003ca href=\"mailto:malaracingllc@gmail.com\"\u003emalaracingllc@gmail.com\u003c\/a\u003e with your bike, year and mods before you order.\u003c\/p\u003e\u003cp style=\"font-size:0.85em\"\u003e\u003cstrong\u003eCalifornia Proposition 65 WARNING:\u003c\/strong\u003e This product can expose you to chemicals including lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to \u003ca href=\"https:\/\/www.P65Warnings.ca.gov\" rel=\"nofollow\"\u003ewww.P65Warnings.ca.gov\u003c\/a\u003e.\u003c\/p\u003e","brand":"aRacer","offers":[{"title":"Default Title","offer_id":67824980787300,"sku":"PA-CX094A0","price":699.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0656\/3771\/1972\/files\/minixadv150_5dff9f1b-6956-4dce-b283-c7768e39db3b.png?v=1792818421"},{"product_id":"aracer-rc-mini-xx-ecu-honda-pcx160-2023","title":"aRacer RC Mini XX ECU – Honda PCX160 2023+","description":"\u003cp\u003eFull programmable engine management for the PCX160 scooter — fuel, ignition and rev limit for exhaust, intake and big-bore builds.\u003c\/p\u003e\u003cp\u003eThe \u003cstrong\u003eaRacer RC Mini XX\u003c\/strong\u003e is the current-generation Mini: a full-replacement programmable ECU for small-displacement EFI singles, with a faster processor, a stronger 360° Wi-Fi antenna, an RGB status LED and a Quick Burn setup that now takes under a minute. It plugs into the factory harness in place of the stock ECU — not a piggyback — and opens up the fuel and ignition maps the factory unit locks away.\u003c\/p\u003e\u003cp\u003eTune from your phone over Wi-Fi with the aRacer X-Tune app, or go deeper on a PC with SpeedTuningX through the PRO-LINK adapter. \u003cstrong\u003eQuick Burn\u003c\/strong\u003e pulls the latest base calibration for your bike from aRacer’s database, with free calibrations for the common bolt-ons (exhaust, intake, big-bore kits). Stock and lightly modified bikes run well on that alone; add an AF2 or AF3 wideband module and the ECU can AutoTune and run closed-loop on your actual engine.\u003c\/p\u003e\u003ch3\u003eWhat it does\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eFull replacement of the factory ECU; plug-in installation on the stock harness\u003c\/li\u003e\n\u003cli\u003eCurrent-generation Mini hardware: faster MCU, stronger Wi-Fi, RGB status LED, injector tolerance correction\u003c\/li\u003e\n\u003cli\u003eOpen fuel, ignition and target-AFR maps with rev-limit and start\/idle control\u003c\/li\u003e\n\u003cli\u003eWi-Fi tuning from the aRacer X-Tune app (iOS \/ Android) or SpeedTuningX on PC\u003c\/li\u003e\n\u003cli\u003eQuick Burn base calibrations and free bolt-on calibrations from the aRacer database\u003c\/li\u003e\n\u003cli\u003eAutoTune and wideband closed-loop with an AF2 \/ AF3 module\u003c\/li\u003e\n\u003cli\u003eWorks with the R Button, DG2 gauge and Sport D display\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cp\u003eFits the 2023-and-later Honda PCX160. Confirm model year and market version before ordering. The ECU connector and calibration are specific to the model and year, so send us your year and VIN if you are unsure.\u003c\/p\u003e\u003ch3\u003eSetup and tuning\u003c\/h3\u003e\u003cp\u003ePlug the ECU into the factory harness, connect to it over Wi-Fi with the free aRacer X-Tune app and run Quick Burn to load the base calibration for your bike and mods. For full map access on a PC you need SpeedTuningX and the PRO-LINK USB adapter (sold separately). Heavily modified engines should be finished on a dyno by a tuner; aRacer’s U.S. team can also remote-tune from logs.\u003c\/p\u003e\u003ch3\u003eWorks with\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/products\/aracer-af3-wideband-afr-module\"\u003eaRacer AF3 Wideband AFR Module\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/aracer-pro-link-usb-communication-adapter\"\u003eaRacer PRO-LINK USB Communication Adapter\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/aracer-dg2-multi-function-display-gauge\"\u003eaRacer DG2 Multi-Function Display Gauge\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/aracer-r-button\"\u003eaRacer R Button\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/aracer-sport-d-racing-display\"\u003eaRacer Sport D Racing Display\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/aracer-hi-power-max-spark-coil\"\u003eaRacer Hi Power MAX Spark Coil\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart number:\u003c\/strong\u003e PA-B602520AX\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePlatform:\u003c\/strong\u003e aRacer RC Mini XX\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApplication:\u003c\/strong\u003e Honda PCX160 2023+\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Full-replacement programmable ECU (plug-in, not piggyback)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnectivity:\u003c\/strong\u003e Built-in Wi-Fi to the aRacer X-Tune app; PC via PRO-LINK\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIn the box:\u003c\/strong\u003e ECU with activation details for the X-Tune app (keep them with the bike)\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eProduct images are aRacer’s renders and may show the same ECU housing as a related model.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eClosed-course competition use only.\u003c\/strong\u003e aRacer ECUs and race electronics are sold for closed-course competition, off-road, dyno and development use. They are not CARB-approved or EPA-certified for pollution-controlled vehicles on public roads. You are responsible for complying with the laws that apply to you.\u003c\/p\u003e\u003ch3\u003eDealer support\u003c\/h3\u003e\u003cp\u003eMala Racing is an authorized aRacer SpeedTek dealer. Orders ship from California, and U.S.-based technical support, calibration help and the aRacer calibration database are available through aRacer ECU R\u0026amp;D of America. Not sure about fitment or which accessories you need? Email \u003ca href=\"mailto:malaracingllc@gmail.com\"\u003emalaracingllc@gmail.com\u003c\/a\u003e with your bike, year and mods before you order.\u003c\/p\u003e\u003cp style=\"font-size:0.85em\"\u003e\u003cstrong\u003eCalifornia Proposition 65 WARNING:\u003c\/strong\u003e This product can expose you to chemicals including lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to \u003ca href=\"https:\/\/www.P65Warnings.ca.gov\" rel=\"nofollow\"\u003ewww.P65Warnings.ca.gov\u003c\/a\u003e.\u003c\/p\u003e","brand":"aRacer","offers":[{"title":"Default Title","offer_id":67824986062948,"sku":"PA-B602520AX","price":699.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0656\/3771\/1972\/files\/minixxmgu-zuma.png?v=1792818466"},{"product_id":"aracer-rc-mini-xx-ecu-honda-cbr300r-2014","title":"aRacer RC Mini XX ECU – Honda CBR300R 2014+","description":"\u003cp\u003eThe CBR300R is a popular lightweight club-racing bike; the Mini XX opens the fuel and ignition maps for full-exhaust and intake builds.\u003c\/p\u003e\u003cp\u003eThe \u003cstrong\u003eaRacer RC Mini XX\u003c\/strong\u003e is the current-generation Mini: a full-replacement programmable ECU for small-displacement EFI singles, with a faster processor, a stronger 360° Wi-Fi antenna, an RGB status LED and a Quick Burn setup that now takes under a minute. It plugs into the factory harness in place of the stock ECU — not a piggyback — and opens up the fuel and ignition maps the factory unit locks away.\u003c\/p\u003e\u003cp\u003eTune from your phone over Wi-Fi with the aRacer X-Tune app, or go deeper on a PC with SpeedTuningX through the PRO-LINK adapter. \u003cstrong\u003eQuick Burn\u003c\/strong\u003e pulls the latest base calibration for your bike from aRacer’s database, with free calibrations for the common bolt-ons (exhaust, intake, big-bore kits). Stock and lightly modified bikes run well on that alone; add an AF2 or AF3 wideband module and the ECU can AutoTune and run closed-loop on your actual engine.\u003c\/p\u003e\u003ch3\u003eWhat it does\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eFull replacement of the factory ECU; plug-in installation on the stock harness\u003c\/li\u003e\n\u003cli\u003eCurrent-generation Mini hardware: faster MCU, stronger Wi-Fi, RGB status LED, injector tolerance correction\u003c\/li\u003e\n\u003cli\u003eOpen fuel, ignition and target-AFR maps with rev-limit and start\/idle control\u003c\/li\u003e\n\u003cli\u003eWi-Fi tuning from the aRacer X-Tune app (iOS \/ Android) or SpeedTuningX on PC\u003c\/li\u003e\n\u003cli\u003eQuick Burn base calibrations and free bolt-on calibrations from the aRacer database\u003c\/li\u003e\n\u003cli\u003eAutoTune and wideband closed-loop with an AF2 \/ AF3 module\u003c\/li\u003e\n\u003cli\u003eWorks with the R Button, DG2 gauge and Sport D display\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cp\u003eFits the 2014-and-later Honda CBR300R. Confirm model year and market version before ordering. The ECU connector and calibration are specific to the model and year, so send us your year and VIN if you are unsure.\u003c\/p\u003e\u003ch3\u003eSetup and tuning\u003c\/h3\u003e\u003cp\u003ePlug the ECU into the factory harness, connect to it over Wi-Fi with the free aRacer X-Tune app and run Quick Burn to load the base calibration for your bike and mods. For full map access on a PC you need SpeedTuningX and the PRO-LINK USB adapter (sold separately). Heavily modified engines should be finished on a dyno by a tuner; aRacer’s U.S. team can also remote-tune from logs.\u003c\/p\u003e\u003ch3\u003eWorks with\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/products\/aracer-af3-wideband-afr-module\"\u003eaRacer AF3 Wideband AFR Module\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/aracer-pro-link-usb-communication-adapter\"\u003eaRacer PRO-LINK USB Communication Adapter\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/aracer-dg2-multi-function-display-gauge\"\u003eaRacer DG2 Multi-Function Display Gauge\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/aracer-r-button\"\u003eaRacer R Button\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/aracer-sport-d-racing-display\"\u003eaRacer Sport D Racing Display\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/aracer-hi-power-max-spark-coil\"\u003eaRacer Hi Power MAX Spark Coil\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart number:\u003c\/strong\u003e PA-B602270AX\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePlatform:\u003c\/strong\u003e aRacer RC Mini XX\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApplication:\u003c\/strong\u003e Honda CBR300R 2014+\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Full-replacement programmable ECU (plug-in, not piggyback)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnectivity:\u003c\/strong\u003e Built-in Wi-Fi to the aRacer X-Tune app; PC via PRO-LINK\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIn the box:\u003c\/strong\u003e ECU with activation details for the X-Tune app (keep them with the bike)\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eProduct images are aRacer’s renders and may show the same ECU housing as a related model.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eClosed-course competition use only.\u003c\/strong\u003e aRacer ECUs and race electronics are sold for closed-course competition, off-road, dyno and development use. They are not CARB-approved or EPA-certified for pollution-controlled vehicles on public roads. You are responsible for complying with the laws that apply to you.\u003c\/p\u003e\u003ch3\u003eDealer support\u003c\/h3\u003e\u003cp\u003eMala Racing is an authorized aRacer SpeedTek dealer. Orders ship from California, and U.S.-based technical support, calibration help and the aRacer calibration database are available through aRacer ECU R\u0026amp;D of America. Not sure about fitment or which accessories you need? Email \u003ca href=\"mailto:malaracingllc@gmail.com\"\u003emalaracingllc@gmail.com\u003c\/a\u003e with your bike, year and mods before you order.\u003c\/p\u003e\u003cp style=\"font-size:0.85em\"\u003e\u003cstrong\u003eCalifornia Proposition 65 WARNING:\u003c\/strong\u003e This product can expose you to chemicals including lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to \u003ca href=\"https:\/\/www.P65Warnings.ca.gov\" rel=\"nofollow\"\u003ewww.P65Warnings.ca.gov\u003c\/a\u003e.\u003c\/p\u003e","brand":"aRacer","offers":[{"title":"Default Title","offer_id":67824986423396,"sku":"PA-B602270AX","price":499.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0656\/3771\/1972\/files\/minixx_cbr300r.png?v=1792818468"},{"product_id":"aracer-rc-mini-xx-ecu-honda-crf110f-2019","title":"aRacer RC Mini XX ECU – Honda CRF110F 2019+","description":"\u003cp\u003eThe affordable way to unlock the fuel-injected CRF110F: open fuel and ignition maps, app tuning and Quick Burn calibrations for the common pit-bike mods.\u003c\/p\u003e\u003cp\u003eThe \u003cstrong\u003eaRacer RC Mini XX\u003c\/strong\u003e is the current-generation Mini: a full-replacement programmable ECU for small-displacement EFI singles, with a faster processor, a stronger 360° Wi-Fi antenna, an RGB status LED and a Quick Burn setup that now takes under a minute. It plugs into the factory harness in place of the stock ECU — not a piggyback — and opens up the fuel and ignition maps the factory unit locks away.\u003c\/p\u003e\u003cp\u003eTune from your phone over Wi-Fi with the aRacer X-Tune app, or go deeper on a PC with SpeedTuningX through the PRO-LINK adapter. \u003cstrong\u003eQuick Burn\u003c\/strong\u003e pulls the latest base calibration for your bike from aRacer’s database, with free calibrations for the common bolt-ons (exhaust, intake, big-bore kits). Stock and lightly modified bikes run well on that alone; add an AF2 or AF3 wideband module and the ECU can AutoTune and run closed-loop on your actual engine.\u003c\/p\u003e\u003ch3\u003eWhat it does\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eFull replacement of the factory ECU; plug-in installation on the stock harness\u003c\/li\u003e\n\u003cli\u003eCurrent-generation Mini hardware: faster MCU, stronger Wi-Fi, RGB status LED, injector tolerance correction\u003c\/li\u003e\n\u003cli\u003eOpen fuel, ignition and target-AFR maps with rev-limit and start\/idle control\u003c\/li\u003e\n\u003cli\u003eWi-Fi tuning from the aRacer X-Tune app (iOS \/ Android) or SpeedTuningX on PC\u003c\/li\u003e\n\u003cli\u003eQuick Burn base calibrations and free bolt-on calibrations from the aRacer database\u003c\/li\u003e\n\u003cli\u003eAutoTune and wideband closed-loop with an AF2 \/ AF3 module\u003c\/li\u003e\n\u003cli\u003eWorks with the R Button, DG2 gauge and Sport D display\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cp\u003eFits the 2019-and-later fuel-injected Honda CRF110F. Not for the carbureted 2013–2018 bikes. The ECU connector and calibration are specific to the model and year, so send us your year and VIN if you are unsure.\u003c\/p\u003e\u003ch3\u003eSetup and tuning\u003c\/h3\u003e\u003cp\u003ePlug the ECU into the factory harness, connect to it over Wi-Fi with the free aRacer X-Tune app and run Quick Burn to load the base calibration for your bike and mods. For full map access on a PC you need SpeedTuningX and the PRO-LINK USB adapter (sold separately). Heavily modified engines should be finished on a dyno by a tuner; aRacer’s U.S. team can also remote-tune from logs.\u003c\/p\u003e\u003ch3\u003eWorks with\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/products\/aracer-af3-wideband-afr-module\"\u003eaRacer AF3 Wideband AFR Module\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/aracer-pro-link-usb-communication-adapter\"\u003eaRacer PRO-LINK USB Communication Adapter\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/aracer-dg2-multi-function-display-gauge\"\u003eaRacer DG2 Multi-Function Display Gauge\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/aracer-r-button\"\u003eaRacer R Button\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/aracer-sport-d-racing-display\"\u003eaRacer Sport D Racing Display\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/aracer-hi-power-max-spark-coil\"\u003eaRacer Hi Power MAX Spark Coil\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart number:\u003c\/strong\u003e PA-B602230AX\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePlatform:\u003c\/strong\u003e aRacer RC Mini XX\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApplication:\u003c\/strong\u003e Honda CRF110F 2019+\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Full-replacement programmable ECU (plug-in, not piggyback)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnectivity:\u003c\/strong\u003e Built-in Wi-Fi to the aRacer X-Tune app; PC via PRO-LINK\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIn the box:\u003c\/strong\u003e ECU with activation details for the X-Tune app (keep them with the bike)\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eProduct images are aRacer’s renders and may show the same ECU housing as a related model.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eClosed-course competition use only.\u003c\/strong\u003e aRacer ECUs and race electronics are sold for closed-course competition, off-road, dyno and development use. They are not CARB-approved or EPA-certified for pollution-controlled vehicles on public roads. You are responsible for complying with the laws that apply to you.\u003c\/p\u003e\u003ch3\u003eDealer support\u003c\/h3\u003e\u003cp\u003eMala Racing is an authorized aRacer SpeedTek dealer. Orders ship from California, and U.S.-based technical support, calibration help and the aRacer calibration database are available through aRacer ECU R\u0026amp;D of America. Not sure about fitment or which accessories you need? Email \u003ca href=\"mailto:malaracingllc@gmail.com\"\u003emalaracingllc@gmail.com\u003c\/a\u003e with your bike, year and mods before you order.\u003c\/p\u003e\u003cp style=\"font-size:0.85em\"\u003e\u003cstrong\u003eCalifornia Proposition 65 WARNING:\u003c\/strong\u003e This product can expose you to chemicals including lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to \u003ca href=\"https:\/\/www.P65Warnings.ca.gov\" rel=\"nofollow\"\u003ewww.P65Warnings.ca.gov\u003c\/a\u003e.\u003c\/p\u003e","brand":"aRacer","offers":[{"title":"Default Title","offer_id":67824986980452,"sku":"PA-B602230AX","price":499.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0656\/3771\/1972\/files\/z125minixx_cfd61001-ca95-4a2d-a1f0-c5158fb67708.png?v=1792818471"},{"product_id":"aracer-rc-mini-xx-ecu-honda-crf125f-2019","title":"aRacer RC Mini XX ECU – Honda CRF125F 2019+","description":"\u003cp\u003eThe affordable way to unlock the fuel-injected CRF125F: open fuel and ignition maps, app tuning and Quick Burn calibrations for the common pit-bike mods.\u003c\/p\u003e\u003cp\u003eThe \u003cstrong\u003eaRacer RC Mini XX\u003c\/strong\u003e is the current-generation Mini: a full-replacement programmable ECU for small-displacement EFI singles, with a faster processor, a stronger 360° Wi-Fi antenna, an RGB status LED and a Quick Burn setup that now takes under a minute. It plugs into the factory harness in place of the stock ECU — not a piggyback — and opens up the fuel and ignition maps the factory unit locks away.\u003c\/p\u003e\u003cp\u003eTune from your phone over Wi-Fi with the aRacer X-Tune app, or go deeper on a PC with SpeedTuningX through the PRO-LINK adapter. \u003cstrong\u003eQuick Burn\u003c\/strong\u003e pulls the latest base calibration for your bike from aRacer’s database, with free calibrations for the common bolt-ons (exhaust, intake, big-bore kits). Stock and lightly modified bikes run well on that alone; add an AF2 or AF3 wideband module and the ECU can AutoTune and run closed-loop on your actual engine.\u003c\/p\u003e\u003ch3\u003eWhat it does\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eFull replacement of the factory ECU; plug-in installation on the stock harness\u003c\/li\u003e\n\u003cli\u003eCurrent-generation Mini hardware: faster MCU, stronger Wi-Fi, RGB status LED, injector tolerance correction\u003c\/li\u003e\n\u003cli\u003eOpen fuel, ignition and target-AFR maps with rev-limit and start\/idle control\u003c\/li\u003e\n\u003cli\u003eWi-Fi tuning from the aRacer X-Tune app (iOS \/ Android) or SpeedTuningX on PC\u003c\/li\u003e\n\u003cli\u003eQuick Burn base calibrations and free bolt-on calibrations from the aRacer database\u003c\/li\u003e\n\u003cli\u003eAutoTune and wideband closed-loop with an AF2 \/ AF3 module\u003c\/li\u003e\n\u003cli\u003eWorks with the R Button, DG2 gauge and Sport D display\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cp\u003eFits the 2019-and-later fuel-injected Honda CRF125F \/ CRF125F Big Wheel. Confirm model year before ordering. The ECU connector and calibration are specific to the model and year, so send us your year and VIN if you are unsure.\u003c\/p\u003e\u003ch3\u003eSetup and tuning\u003c\/h3\u003e\u003cp\u003ePlug the ECU into the factory harness, connect to it over Wi-Fi with the free aRacer X-Tune app and run Quick Burn to load the base calibration for your bike and mods. For full map access on a PC you need SpeedTuningX and the PRO-LINK USB adapter (sold separately). Heavily modified engines should be finished on a dyno by a tuner; aRacer’s U.S. team can also remote-tune from logs.\u003c\/p\u003e\u003ch3\u003eWorks with\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/products\/aracer-af3-wideband-afr-module\"\u003eaRacer AF3 Wideband AFR Module\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/aracer-pro-link-usb-communication-adapter\"\u003eaRacer PRO-LINK USB Communication Adapter\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/aracer-dg2-multi-function-display-gauge\"\u003eaRacer DG2 Multi-Function Display Gauge\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/aracer-r-button\"\u003eaRacer R Button\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/aracer-sport-d-racing-display\"\u003eaRacer Sport D Racing Display\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/aracer-hi-power-max-spark-coil\"\u003eaRacer Hi Power MAX Spark Coil\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart number:\u003c\/strong\u003e PA-B602300AX\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePlatform:\u003c\/strong\u003e aRacer RC Mini XX\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApplication:\u003c\/strong\u003e Honda CRF125F 2019+\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Full-replacement programmable ECU (plug-in, not piggyback)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnectivity:\u003c\/strong\u003e Built-in Wi-Fi to the aRacer X-Tune app; PC via PRO-LINK\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIn the box:\u003c\/strong\u003e ECU with activation details for the X-Tune app (keep them with the bike)\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eProduct images are aRacer’s renders and may show the same ECU housing as a related model.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eClosed-course competition use only.\u003c\/strong\u003e aRacer ECUs and race electronics are sold for closed-course competition, off-road, dyno and development use. They are not CARB-approved or EPA-certified for pollution-controlled vehicles on public roads. You are responsible for complying with the laws that apply to you.\u003c\/p\u003e\u003ch3\u003eDealer support\u003c\/h3\u003e\u003cp\u003eMala Racing is an authorized aRacer SpeedTek dealer. Orders ship from California, and U.S.-based technical support, calibration help and the aRacer calibration database are available through aRacer ECU R\u0026amp;D of America. Not sure about fitment or which accessories you need? Email \u003ca href=\"mailto:malaracingllc@gmail.com\"\u003emalaracingllc@gmail.com\u003c\/a\u003e with your bike, year and mods before you order.\u003c\/p\u003e\u003cp style=\"font-size:0.85em\"\u003e\u003cstrong\u003eCalifornia Proposition 65 WARNING:\u003c\/strong\u003e This product can expose you to chemicals including lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to \u003ca href=\"https:\/\/www.P65Warnings.ca.gov\" rel=\"nofollow\"\u003ewww.P65Warnings.ca.gov\u003c\/a\u003e.\u003c\/p\u003e","brand":"aRacer","offers":[{"title":"Default Title","offer_id":67824993239140,"sku":"PA-B602300AX","price":499.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0656\/3771\/1972\/files\/z125minixx_a45ab600-7a2d-49c2-9ecd-60c088fe5c63.png?v=1792818514"},{"product_id":"aracer-rc-mini-xx-ecu-honda-grom-125-msx-125-2012-2016","title":"aRacer RC Mini XX ECU – Honda Grom 125 \/ MSX 125 2012–2016","description":"\u003cp\u003eThe first-generation Grom is still everywhere on the mini-moto grids; this is the current-generation Mini XX for it.\u003c\/p\u003e\u003cp\u003eThe \u003cstrong\u003eaRacer RC Mini XX\u003c\/strong\u003e is the current-generation Mini: a full-replacement programmable ECU for small-displacement EFI singles, with a faster processor, a stronger 360° Wi-Fi antenna, an RGB status LED and a Quick Burn setup that now takes under a minute. It plugs into the factory harness in place of the stock ECU — not a piggyback — and opens up the fuel and ignition maps the factory unit locks away.\u003c\/p\u003e\u003cp\u003eTune from your phone over Wi-Fi with the aRacer X-Tune app, or go deeper on a PC with SpeedTuningX through the PRO-LINK adapter. \u003cstrong\u003eQuick Burn\u003c\/strong\u003e pulls the latest base calibration for your bike from aRacer’s database, with free calibrations for the common bolt-ons (exhaust, intake, big-bore kits). Stock and lightly modified bikes run well on that alone; add an AF2 or AF3 wideband module and the ECU can AutoTune and run closed-loop on your actual engine.\u003c\/p\u003e\u003ch3\u003eWhat it does\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eFull replacement of the factory ECU; plug-in installation on the stock harness\u003c\/li\u003e\n\u003cli\u003eCurrent-generation Mini hardware: faster MCU, stronger Wi-Fi, RGB status LED, injector tolerance correction\u003c\/li\u003e\n\u003cli\u003eOpen fuel, ignition and target-AFR maps with rev-limit and start\/idle control\u003c\/li\u003e\n\u003cli\u003eWi-Fi tuning from the aRacer X-Tune app (iOS \/ Android) or SpeedTuningX on PC\u003c\/li\u003e\n\u003cli\u003eQuick Burn base calibrations and free bolt-on calibrations from the aRacer database\u003c\/li\u003e\n\u003cli\u003eAutoTune and wideband closed-loop with an AF2 \/ AF3 module\u003c\/li\u003e\n\u003cli\u003eWorks with the R Button, DG2 gauge and Sport D display\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cp\u003eFits the 2012–2016 first-generation Honda Grom 125 \/ MSX 125. The 2016–2020 SF and the 2021+ five-speed use different ECUs — see those listings. The ECU connector and calibration are specific to the model and year, so send us your year and VIN if you are unsure.\u003c\/p\u003e\u003ch3\u003eSetup and tuning\u003c\/h3\u003e\u003cp\u003ePlug the ECU into the factory harness, connect to it over Wi-Fi with the free aRacer X-Tune app and run Quick Burn to load the base calibration for your bike and mods. For full map access on a PC you need SpeedTuningX and the PRO-LINK USB adapter (sold separately). Heavily modified engines should be finished on a dyno by a tuner; aRacer’s U.S. team can also remote-tune from logs.\u003c\/p\u003e\u003ch3\u003eWorks with\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/products\/aracer-af3-wideband-afr-module\"\u003eaRacer AF3 Wideband AFR Module\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/aracer-pro-link-usb-communication-adapter\"\u003eaRacer PRO-LINK USB Communication Adapter\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/aracer-dg2-multi-function-display-gauge\"\u003eaRacer DG2 Multi-Function Display Gauge\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/aracer-r-button\"\u003eaRacer R Button\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/aracer-sport-d-racing-display\"\u003eaRacer Sport D Racing Display\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/aracer-hi-power-max-spark-coil\"\u003eaRacer Hi Power MAX Spark Coil\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart number:\u003c\/strong\u003e PA-B602080AX\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePlatform:\u003c\/strong\u003e aRacer RC Mini XX\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApplication:\u003c\/strong\u003e Honda Grom 125 \/ MSX 125 2012–2016\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Full-replacement programmable ECU (plug-in, not piggyback)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnectivity:\u003c\/strong\u003e Built-in Wi-Fi to the aRacer X-Tune app; PC via PRO-LINK\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIn the box:\u003c\/strong\u003e ECU with activation details for the X-Tune app (keep them with the bike)\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eProduct images are aRacer’s renders and may show the same ECU housing as a related model.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eClosed-course competition use only.\u003c\/strong\u003e aRacer ECUs and race electronics are sold for closed-course competition, off-road, dyno and development use. They are not CARB-approved or EPA-certified for pollution-controlled vehicles on public roads. You are responsible for complying with the laws that apply to you.\u003c\/p\u003e\u003ch3\u003eDealer support\u003c\/h3\u003e\u003cp\u003eMala Racing is an authorized aRacer SpeedTek dealer. Orders ship from California, and U.S.-based technical support, calibration help and the aRacer calibration database are available through aRacer ECU R\u0026amp;D of America. Not sure about fitment or which accessories you need? Email \u003ca href=\"mailto:malaracingllc@gmail.com\"\u003emalaracingllc@gmail.com\u003c\/a\u003e with your bike, year and mods before you order.\u003c\/p\u003e\u003cp style=\"font-size:0.85em\"\u003e\u003cstrong\u003eCalifornia Proposition 65 WARNING:\u003c\/strong\u003e This product can expose you to chemicals including lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to \u003ca href=\"https:\/\/www.P65Warnings.ca.gov\" rel=\"nofollow\"\u003ewww.P65Warnings.ca.gov\u003c\/a\u003e.\u003c\/p\u003e","brand":"aRacer","offers":[{"title":"Default Title","offer_id":67824993861732,"sku":"PA-B602080AX","price":499.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0656\/3771\/1972\/files\/z125minixx.png?v=1792818518"},{"product_id":"aracer-rc-mini-xx-ecu-honda-grom-sf-125-msx-sf-125-2016-2020","title":"aRacer RC Mini XX ECU – Honda Grom SF 125 \/ MSX SF 125 2016–2020","description":"\u003cp\u003eCurrent-generation Mini XX for the SF-generation Grom — faster hardware, stronger Wi-Fi and the quicker Quick Burn setup.\u003c\/p\u003e\u003cp\u003eThe \u003cstrong\u003eaRacer RC Mini XX\u003c\/strong\u003e is the current-generation Mini: a full-replacement programmable ECU for small-displacement EFI singles, with a faster processor, a stronger 360° Wi-Fi antenna, an RGB status LED and a Quick Burn setup that now takes under a minute. It plugs into the factory harness in place of the stock ECU — not a piggyback — and opens up the fuel and ignition maps the factory unit locks away.\u003c\/p\u003e\u003cp\u003eTune from your phone over Wi-Fi with the aRacer X-Tune app, or go deeper on a PC with SpeedTuningX through the PRO-LINK adapter. \u003cstrong\u003eQuick Burn\u003c\/strong\u003e pulls the latest base calibration for your bike from aRacer’s database, with free calibrations for the common bolt-ons (exhaust, intake, big-bore kits). Stock and lightly modified bikes run well on that alone; add an AF2 or AF3 wideband module and the ECU can AutoTune and run closed-loop on your actual engine.\u003c\/p\u003e\u003ch3\u003eWhat it does\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eFull replacement of the factory ECU; plug-in installation on the stock harness\u003c\/li\u003e\n\u003cli\u003eCurrent-generation Mini hardware: faster MCU, stronger Wi-Fi, RGB status LED, injector tolerance correction\u003c\/li\u003e\n\u003cli\u003eOpen fuel, ignition and target-AFR maps with rev-limit and start\/idle control\u003c\/li\u003e\n\u003cli\u003eWi-Fi tuning from the aRacer X-Tune app (iOS \/ Android) or SpeedTuningX on PC\u003c\/li\u003e\n\u003cli\u003eQuick Burn base calibrations and free bolt-on calibrations from the aRacer database\u003c\/li\u003e\n\u003cli\u003eAutoTune and wideband closed-loop with an AF2 \/ AF3 module\u003c\/li\u003e\n\u003cli\u003eWorks with the R Button, DG2 gauge and Sport D display\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cp\u003eFits the 2016–2020 Honda Grom SF 125 \/ MSX SF 125. Not for the 2013–2015 first-generation bike or the 2021+ five-speed. The ECU connector and calibration are specific to the model and year, so send us your year and VIN if you are unsure.\u003c\/p\u003e\u003ch3\u003eSetup and tuning\u003c\/h3\u003e\u003cp\u003ePlug the ECU into the factory harness, connect to it over Wi-Fi with the free aRacer X-Tune app and run Quick Burn to load the base calibration for your bike and mods. For full map access on a PC you need SpeedTuningX and the PRO-LINK USB adapter (sold separately). Heavily modified engines should be finished on a dyno by a tuner; aRacer’s U.S. team can also remote-tune from logs.\u003c\/p\u003e\u003ch3\u003eWorks with\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/products\/aracer-af3-wideband-afr-module\"\u003eaRacer AF3 Wideband AFR Module\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/aracer-pro-link-usb-communication-adapter\"\u003eaRacer PRO-LINK USB Communication Adapter\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/aracer-dg2-multi-function-display-gauge\"\u003eaRacer DG2 Multi-Function Display Gauge\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/aracer-r-button\"\u003eaRacer R Button\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/aracer-sport-d-racing-display\"\u003eaRacer Sport D Racing Display\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/aracer-hi-power-max-spark-coil\"\u003eaRacer Hi Power MAX Spark Coil\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart number:\u003c\/strong\u003e PA-B602090AX\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePlatform:\u003c\/strong\u003e aRacer RC Mini XX\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApplication:\u003c\/strong\u003e Honda Grom SF 125 \/ MSX SF 125 2016–2020\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Full-replacement programmable ECU (plug-in, not piggyback)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnectivity:\u003c\/strong\u003e Built-in Wi-Fi to the aRacer X-Tune app; PC via PRO-LINK\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIn the box:\u003c\/strong\u003e ECU with activation details for the X-Tune app (keep them with the bike)\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eProduct images are aRacer’s renders and may show the same ECU housing as a related model.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eClosed-course competition use only.\u003c\/strong\u003e aRacer ECUs and race electronics are sold for closed-course competition, off-road, dyno and development use. They are not CARB-approved or EPA-certified for pollution-controlled vehicles on public roads. You are responsible for complying with the laws that apply to you.\u003c\/p\u003e\u003ch3\u003eDealer support\u003c\/h3\u003e\u003cp\u003eMala Racing is an authorized aRacer SpeedTek dealer. Orders ship from California, and U.S.-based technical support, calibration help and the aRacer calibration database are available through aRacer ECU R\u0026amp;D of America. Not sure about fitment or which accessories you need? Email \u003ca href=\"mailto:malaracingllc@gmail.com\"\u003emalaracingllc@gmail.com\u003c\/a\u003e with your bike, year and mods before you order.\u003c\/p\u003e\u003cp style=\"font-size:0.85em\"\u003e\u003cstrong\u003eCalifornia Proposition 65 WARNING:\u003c\/strong\u003e This product can expose you to chemicals including lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to \u003ca href=\"https:\/\/www.P65Warnings.ca.gov\" rel=\"nofollow\"\u003ewww.P65Warnings.ca.gov\u003c\/a\u003e.\u003c\/p\u003e","brand":"aRacer","offers":[{"title":"Default Title","offer_id":67824993894500,"sku":"PA-B602090AX","price":499.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0656\/3771\/1972\/files\/z125minixx_292192c0-7c34-487f-899e-d9fdc6b4d6f1.png?v=1792818518"},{"product_id":"aracer-rc-super-x-pro-ecu-honda-crf300l-crf300l-rally-2021","title":"aRacer RC Super X PRO ECU – Honda CRF300L \/ CRF300L Rally 2021+","description":"\u003cp\u003eRace-level engine management for the CRF300L \/ Rally: everything the Mini X does plus quick shifter, Race Panel and Race Module support.\u003c\/p\u003e\u003cp\u003eThe \u003cstrong\u003eaRacer RC Super X PRO\u003c\/strong\u003e is aRacer’s race-level ECU. It does everything the Mini does — full replacement of the factory ECU, open fuel and ignition maps, Wi-Fi tuning from the X-Tune app or SpeedTuningX on PC, Quick Burn calibrations, AutoTune with a wideband — and adds the hardware and feature set a race bike needs: a faster multi-core processor, finer ignition resolution, more onboard logging memory, an IP67 connection and support for aRacer’s race accessories.\u003c\/p\u003e\u003cp\u003eThat means the \u003cstrong\u003eQSR V2 quick shifter\u003c\/strong\u003e, the \u003cstrong\u003eRace Panel 2\u003c\/strong\u003e and \u003cstrong\u003eiMode 5\u003c\/strong\u003e touchscreen displays, the \u003cstrong\u003e3-Button Race Switch\u003c\/strong\u003e and \u003cstrong\u003eVSS speed sensors\u003c\/strong\u003e for Race Module functions such as launch control, pit limiter and on-the-fly map switching. Mini X \/ Mini XX ECUs cannot run those accessories.\u003c\/p\u003e\u003ch3\u003eWhat it does\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eFull replacement of the factory ECU; plug-in installation on the stock harness\u003c\/li\u003e\n\u003cli\u003eRace-level hardware: multi-core MCU, 0.25° ignition resolution, expanded Fly Recorder logging, IP67 connection\u003c\/li\u003e\n\u003cli\u003eOpen fuel and ignition maps with rev-limit, start\/idle and backfire control\u003c\/li\u003e\n\u003cli\u003eWi-Fi tuning from the aRacer X-Tune app (iOS \/ Android) or SpeedTuningX on PC\u003c\/li\u003e\n\u003cli\u003eQuick Burn base calibrations and free bolt-on calibrations from the aRacer database\u003c\/li\u003e\n\u003cli\u003eAutoTune and wideband closed-loop with an AF2 \/ AF3 module\u003c\/li\u003e\n\u003cli\u003eSupports QSR V2 quick shifter, Race Panel 2, iMode 5, 3-Button Race Switch and VSS (functions vary by application)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cp\u003eFits the 2021-and-later Honda CRF300L and CRF300L Rally. Confirm model year and market version before ordering. The ECU connector and calibration are specific to the model and year, so send us your year and VIN if you are unsure.\u003c\/p\u003e\u003ch3\u003eSetup and tuning\u003c\/h3\u003e\u003cp\u003ePlug the ECU into the factory harness, connect to it over Wi-Fi with the free aRacer X-Tune app and run Quick Burn to load the base calibration for your bike and mods. For full map access on a PC you need SpeedTuningX and the PRO-LINK USB adapter (sold separately). Heavily modified engines should be finished on a dyno by a tuner; aRacer’s U.S. team can also remote-tune from logs.\u003c\/p\u003e\u003ch3\u003eWorks with\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/products\/aracer-qsr-v2-quick-shift-race-v2\"\u003eaRacer QSR V2 Quick Shifter\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/aracer-race-panel-2\"\u003eaRacer Race Panel 2\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/aracer-imode-5-controller\"\u003eaRacer iMode 5 Controller\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/aracer-af3-wideband-afr-module\"\u003eaRacer AF3 Wideband AFR Module\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/aracer-pro-link-usb-communication-adapter\"\u003eaRacer PRO-LINK USB Communication Adapter\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/aracer-3-button-race-switch\"\u003eaRacer 3-Button Race Switch\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/aracer-r-button\"\u003eaRacer R Button\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/aracer-dg2-multi-function-display-gauge\"\u003eaRacer DG2 Multi-Function Display Gauge\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart number:\u003c\/strong\u003e PA-SX136D0\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePlatform:\u003c\/strong\u003e aRacer RC Super X PRO\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApplication:\u003c\/strong\u003e Honda CRF300L \/ CRF300L Rally 2021+\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Full-replacement programmable ECU (plug-in, not piggyback)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnectivity:\u003c\/strong\u003e Built-in Wi-Fi to the aRacer X-Tune app; PC via PRO-LINK\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIn the box:\u003c\/strong\u003e ECU with activation details for the X-Tune app (keep them with the bike)\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eProduct images are aRacer’s renders and may show the same ECU housing as a related model.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eClosed-course competition use only.\u003c\/strong\u003e aRacer ECUs and race electronics are sold for closed-course competition, off-road, dyno and development use. They are not CARB-approved or EPA-certified for pollution-controlled vehicles on public roads. You are responsible for complying with the laws that apply to you.\u003c\/p\u003e\u003ch3\u003eDealer support\u003c\/h3\u003e\u003cp\u003eMala Racing is an authorized aRacer SpeedTek dealer. Orders ship from California, and U.S.-based technical support, calibration help and the aRacer calibration database are available through aRacer ECU R\u0026amp;D of America. Not sure about fitment or which accessories you need? Email \u003ca href=\"mailto:malaracingllc@gmail.com\"\u003emalaracingllc@gmail.com\u003c\/a\u003e with your bike, year and mods before you order.\u003c\/p\u003e\u003cp style=\"font-size:0.85em\"\u003e\u003cstrong\u003eCalifornia Proposition 65 WARNING:\u003c\/strong\u003e This product can expose you to chemicals including lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to \u003ca href=\"https:\/\/www.P65Warnings.ca.gov\" rel=\"nofollow\"\u003ewww.P65Warnings.ca.gov\u003c\/a\u003e.\u003c\/p\u003e","brand":"aRacer","offers":[{"title":"Default Title","offer_id":67825003233380,"sku":"PA-SX136D0","price":969.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0656\/3771\/1972\/files\/superx_cfr300l-2.png?v=1792818577"},{"product_id":"aracer-rc-mini-xx-ecu-kawasaki-z125-pro-2018","title":"aRacer RC Mini XX ECU – Kawasaki Z125 Pro 2018+","description":"\u003cp\u003eThe Z125 Pro races in the same mini-moto classes as the Grom; this is the ECU that opens its fuel and ignition maps for exhaust, intake and big-bore builds.\u003c\/p\u003e\u003cp\u003eThe \u003cstrong\u003eaRacer RC Mini XX\u003c\/strong\u003e is the current-generation Mini: a full-replacement programmable ECU for small-displacement EFI singles, with a faster processor, a stronger 360° Wi-Fi antenna, an RGB status LED and a Quick Burn setup that now takes under a minute. It plugs into the factory harness in place of the stock ECU — not a piggyback — and opens up the fuel and ignition maps the factory unit locks away.\u003c\/p\u003e\u003cp\u003eTune from your phone over Wi-Fi with the aRacer X-Tune app, or go deeper on a PC with SpeedTuningX through the PRO-LINK adapter. \u003cstrong\u003eQuick Burn\u003c\/strong\u003e pulls the latest base calibration for your bike from aRacer’s database, with free calibrations for the common bolt-ons (exhaust, intake, big-bore kits). Stock and lightly modified bikes run well on that alone; add an AF2 or AF3 wideband module and the ECU can AutoTune and run closed-loop on your actual engine.\u003c\/p\u003e\u003ch3\u003eWhat it does\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eFull replacement of the factory ECU; plug-in installation on the stock harness\u003c\/li\u003e\n\u003cli\u003eCurrent-generation Mini hardware: faster MCU, stronger Wi-Fi, RGB status LED, injector tolerance correction\u003c\/li\u003e\n\u003cli\u003eOpen fuel, ignition and target-AFR maps with rev-limit and start\/idle control\u003c\/li\u003e\n\u003cli\u003eWi-Fi tuning from the aRacer X-Tune app (iOS \/ Android) or SpeedTuningX on PC\u003c\/li\u003e\n\u003cli\u003eQuick Burn base calibrations and free bolt-on calibrations from the aRacer database\u003c\/li\u003e\n\u003cli\u003eAutoTune and wideband closed-loop with an AF2 \/ AF3 module\u003c\/li\u003e\n\u003cli\u003eWorks with the R Button, DG2 gauge and Sport D display\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cp\u003eFits the 2018-and-later Kawasaki Z125 Pro. Confirm model year and market version before ordering. The ECU connector and calibration are specific to the model and year, so send us your year and VIN if you are unsure.\u003c\/p\u003e\u003ch3\u003eSetup and tuning\u003c\/h3\u003e\u003cp\u003ePlug the ECU into the factory harness, connect to it over Wi-Fi with the free aRacer X-Tune app and run Quick Burn to load the base calibration for your bike and mods. For full map access on a PC you need SpeedTuningX and the PRO-LINK USB adapter (sold separately). Heavily modified engines should be finished on a dyno by a tuner; aRacer’s U.S. team can also remote-tune from logs.\u003c\/p\u003e\u003ch3\u003eWorks with\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/products\/aracer-af3-wideband-afr-module\"\u003eaRacer AF3 Wideband AFR Module\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/aracer-pro-link-usb-communication-adapter\"\u003eaRacer PRO-LINK USB Communication Adapter\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/aracer-dg2-multi-function-display-gauge\"\u003eaRacer DG2 Multi-Function Display Gauge\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/aracer-r-button\"\u003eaRacer R Button\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/aracer-sport-d-racing-display\"\u003eaRacer Sport D Racing Display\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/aracer-hi-power-max-spark-coil\"\u003eaRacer Hi Power MAX Spark Coil\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart number:\u003c\/strong\u003e PA-B603040AX\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePlatform:\u003c\/strong\u003e aRacer RC Mini XX\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApplication:\u003c\/strong\u003e Kawasaki Z125 Pro 2018+\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Full-replacement programmable ECU (plug-in, not piggyback)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnectivity:\u003c\/strong\u003e Built-in Wi-Fi to the aRacer X-Tune app; PC via PRO-LINK\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIn the box:\u003c\/strong\u003e ECU with activation details for the X-Tune app (keep them with the bike)\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eProduct images are aRacer’s renders and may show the same ECU housing as a related model.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eClosed-course competition use only.\u003c\/strong\u003e aRacer ECUs and race electronics are sold for closed-course competition, off-road, dyno and development use. They are not CARB-approved or EPA-certified for pollution-controlled vehicles on public roads. You are responsible for complying with the laws that apply to you.\u003c\/p\u003e\u003ch3\u003eDealer support\u003c\/h3\u003e\u003cp\u003eMala Racing is an authorized aRacer SpeedTek dealer. Orders ship from California, and U.S.-based technical support, calibration help and the aRacer calibration database are available through aRacer ECU R\u0026amp;D of America. Not sure about fitment or which accessories you need? Email \u003ca href=\"mailto:malaracingllc@gmail.com\"\u003emalaracingllc@gmail.com\u003c\/a\u003e with your bike, year and mods before you order.\u003c\/p\u003e\u003cp style=\"font-size:0.85em\"\u003e\u003cstrong\u003eCalifornia Proposition 65 WARNING:\u003c\/strong\u003e This product can expose you to chemicals including lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to \u003ca href=\"https:\/\/www.P65Warnings.ca.gov\" rel=\"nofollow\"\u003ewww.P65Warnings.ca.gov\u003c\/a\u003e.\u003c\/p\u003e","brand":"aRacer","offers":[{"title":"Default Title","offer_id":67825009131620,"sku":"PA-B603040AX","price":499.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0656\/3771\/1972\/files\/z125minixx_bf3f5757-4645-4053-a7b9-bbcd25f78aac.png?v=1792818614"},{"product_id":"aracer-rc-super-x-pro-ecu-kawasaki-ninja-400-2018-2023","title":"aRacer RC Super X PRO ECU – Kawasaki Ninja 400 2018–2023","description":"\u003cp\u003eRace-level standalone engine management for the Ninja 400 twin — open maps, quick shifter support and the Race Module feature set for club racing.\u003c\/p\u003e\u003cp\u003eThe \u003cstrong\u003eaRacer RC Super X PRO\u003c\/strong\u003e is aRacer’s race-level ECU. It does everything the Mini does — full replacement of the factory ECU, open fuel and ignition maps, Wi-Fi tuning from the X-Tune app or SpeedTuningX on PC, Quick Burn calibrations, AutoTune with a wideband — and adds the hardware and feature set a race bike needs: a faster multi-core processor, finer ignition resolution, more onboard logging memory, an IP67 connection and support for aRacer’s race accessories.\u003c\/p\u003e\u003cp\u003eThat means the \u003cstrong\u003eQSR V2 quick shifter\u003c\/strong\u003e, the \u003cstrong\u003eRace Panel 2\u003c\/strong\u003e and \u003cstrong\u003eiMode 5\u003c\/strong\u003e touchscreen displays, the \u003cstrong\u003e3-Button Race Switch\u003c\/strong\u003e and \u003cstrong\u003eVSS speed sensors\u003c\/strong\u003e for Race Module functions such as launch control, pit limiter and on-the-fly map switching. Mini X \/ Mini XX ECUs cannot run those accessories.\u003c\/p\u003e\u003ch3\u003eWhat it does\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eFull replacement of the factory ECU; plug-in installation on the stock harness\u003c\/li\u003e\n\u003cli\u003eRace-level hardware: multi-core MCU, 0.25° ignition resolution, expanded Fly Recorder logging, IP67 connection\u003c\/li\u003e\n\u003cli\u003eOpen fuel and ignition maps with rev-limit, start\/idle and backfire control\u003c\/li\u003e\n\u003cli\u003eWi-Fi tuning from the aRacer X-Tune app (iOS \/ Android) or SpeedTuningX on PC\u003c\/li\u003e\n\u003cli\u003eQuick Burn base calibrations and free bolt-on calibrations from the aRacer database\u003c\/li\u003e\n\u003cli\u003eAutoTune and wideband closed-loop with an AF2 \/ AF3 module\u003c\/li\u003e\n\u003cli\u003eSupports QSR V2 quick shifter, Race Panel 2, iMode 5, 3-Button Race Switch and VSS (functions vary by application)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cp\u003eFits the 2018–2023 Kawasaki Ninja 400. Confirm model year and market version before ordering. The ECU connector and calibration are specific to the model and year, so send us your year and VIN if you are unsure.\u003c\/p\u003e\u003ch3\u003eSetup and tuning\u003c\/h3\u003e\u003cp\u003ePlug the ECU into the factory harness, connect to it over Wi-Fi with the free aRacer X-Tune app and run Quick Burn to load the base calibration for your bike and mods. For full map access on a PC you need SpeedTuningX and the PRO-LINK USB adapter (sold separately). Heavily modified engines should be finished on a dyno by a tuner; aRacer’s U.S. team can also remote-tune from logs.\u003c\/p\u003e\u003ch3\u003eWorks with\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/products\/aracer-qsr-v2-quick-shift-race-v2\"\u003eaRacer QSR V2 Quick Shifter\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/aracer-race-panel-2\"\u003eaRacer Race Panel 2\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/aracer-imode-5-controller\"\u003eaRacer iMode 5 Controller\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/aracer-af3-wideband-afr-module\"\u003eaRacer AF3 Wideband AFR Module\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/aracer-pro-link-usb-communication-adapter\"\u003eaRacer PRO-LINK USB Communication Adapter\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/aracer-3-button-race-switch\"\u003eaRacer 3-Button Race Switch\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/aracer-r-button\"\u003eaRacer R Button\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/aracer-dg2-multi-function-display-gauge\"\u003eaRacer DG2 Multi-Function Display Gauge\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart number:\u003c\/strong\u003e PA-SX036D0\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePlatform:\u003c\/strong\u003e aRacer RC Super X PRO\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApplication:\u003c\/strong\u003e Kawasaki Ninja 400 2018–2023\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Full-replacement programmable ECU (plug-in, not piggyback)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnectivity:\u003c\/strong\u003e Built-in Wi-Fi to the aRacer X-Tune app; PC via PRO-LINK\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIn the box:\u003c\/strong\u003e ECU with activation details for the X-Tune app (keep them with the bike)\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eProduct images are aRacer’s renders and may show the same ECU housing as a related model.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eClosed-course competition use only.\u003c\/strong\u003e aRacer ECUs and race electronics are sold for closed-course competition, off-road, dyno and development use. They are not CARB-approved or EPA-certified for pollution-controlled vehicles on public roads. You are responsible for complying with the laws that apply to you.\u003c\/p\u003e\u003ch3\u003eDealer support\u003c\/h3\u003e\u003cp\u003eMala Racing is an authorized aRacer SpeedTek dealer. Orders ship from California, and U.S.-based technical support, calibration help and the aRacer calibration database are available through aRacer ECU R\u0026amp;D of America. Not sure about fitment or which accessories you need? Email \u003ca href=\"mailto:malaracingllc@gmail.com\"\u003emalaracingllc@gmail.com\u003c\/a\u003e with your bike, year and mods before you order.\u003c\/p\u003e\u003cp style=\"font-size:0.85em\"\u003e\u003cstrong\u003eCalifornia Proposition 65 WARNING:\u003c\/strong\u003e This product can expose you to chemicals including lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to \u003ca href=\"https:\/\/www.P65Warnings.ca.gov\" rel=\"nofollow\"\u003ewww.P65Warnings.ca.gov\u003c\/a\u003e.\u003c\/p\u003e","brand":"aRacer","offers":[{"title":"Default Title","offer_id":67825010475108,"sku":"PA-SX036D0","price":969.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0656\/3771\/1972\/files\/superx_ninja400-2.png?v=1792818626"},{"product_id":"aracer-rc-mini-xx-ecu-yamaha-zuma-125-bws-125-2020","title":"aRacer RC Mini XX ECU – Yamaha Zuma 125 \/ BWs 125 2020+","description":"\u003cp\u003eFull programmable engine management for the current Zuma 125 — fuel, ignition and rev limit for exhaust, intake and big-bore builds.\u003c\/p\u003e\u003cp\u003eThe \u003cstrong\u003eaRacer RC Mini XX\u003c\/strong\u003e is the current-generation Mini: a full-replacement programmable ECU for small-displacement EFI singles, with a faster processor, a stronger 360° Wi-Fi antenna, an RGB status LED and a Quick Burn setup that now takes under a minute. It plugs into the factory harness in place of the stock ECU — not a piggyback — and opens up the fuel and ignition maps the factory unit locks away.\u003c\/p\u003e\u003cp\u003eTune from your phone over Wi-Fi with the aRacer X-Tune app, or go deeper on a PC with SpeedTuningX through the PRO-LINK adapter. \u003cstrong\u003eQuick Burn\u003c\/strong\u003e pulls the latest base calibration for your bike from aRacer’s database, with free calibrations for the common bolt-ons (exhaust, intake, big-bore kits). Stock and lightly modified bikes run well on that alone; add an AF2 or AF3 wideband module and the ECU can AutoTune and run closed-loop on your actual engine.\u003c\/p\u003e\u003ch3\u003eWhat it does\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eFull replacement of the factory ECU; plug-in installation on the stock harness\u003c\/li\u003e\n\u003cli\u003eCurrent-generation Mini hardware: faster MCU, stronger Wi-Fi, RGB status LED, injector tolerance correction\u003c\/li\u003e\n\u003cli\u003eOpen fuel, ignition and target-AFR maps with rev-limit and start\/idle control\u003c\/li\u003e\n\u003cli\u003eWi-Fi tuning from the aRacer X-Tune app (iOS \/ Android) or SpeedTuningX on PC\u003c\/li\u003e\n\u003cli\u003eQuick Burn base calibrations and free bolt-on calibrations from the aRacer database\u003c\/li\u003e\n\u003cli\u003eAutoTune and wideband closed-loop with an AF2 \/ AF3 module\u003c\/li\u003e\n\u003cli\u003eWorks with the R Button, DG2 gauge and Sport D display\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cp\u003eFits the 2020-and-later Yamaha Zuma 125 \/ BWs 125. Earlier Zumas use different ECUs — see the 2008–2015, 2015–2017 R and 2017–2020 listings. The ECU connector and calibration are specific to the model and year, so send us your year and VIN if you are unsure.\u003c\/p\u003e\u003ch3\u003eSetup and tuning\u003c\/h3\u003e\u003cp\u003ePlug the ECU into the factory harness, connect to it over Wi-Fi with the free aRacer X-Tune app and run Quick Burn to load the base calibration for your bike and mods. For full map access on a PC you need SpeedTuningX and the PRO-LINK USB adapter (sold separately). Heavily modified engines should be finished on a dyno by a tuner; aRacer’s U.S. team can also remote-tune from logs.\u003c\/p\u003e\u003ch3\u003eWorks with\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/products\/aracer-af3-wideband-afr-module\"\u003eaRacer AF3 Wideband AFR Module\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/aracer-pro-link-usb-communication-adapter\"\u003eaRacer PRO-LINK USB Communication Adapter\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/aracer-dg2-multi-function-display-gauge\"\u003eaRacer DG2 Multi-Function Display Gauge\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/aracer-r-button\"\u003eaRacer R Button\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/aracer-sport-d-racing-display\"\u003eaRacer Sport D Racing Display\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/aracer-hi-power-max-spark-coil\"\u003eaRacer Hi Power MAX Spark Coil\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart number:\u003c\/strong\u003e PA-B601060AX\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePlatform:\u003c\/strong\u003e aRacer RC Mini XX\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApplication:\u003c\/strong\u003e Yamaha Zuma 125 \/ BWs 125 2020+\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Full-replacement programmable ECU (plug-in, not piggyback)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnectivity:\u003c\/strong\u003e Built-in Wi-Fi to the aRacer X-Tune app; PC via PRO-LINK\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIn the box:\u003c\/strong\u003e ECU with activation details for the X-Tune app (keep them with the bike)\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eProduct images are aRacer’s renders and may show the same ECU housing as a related model.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eClosed-course competition use only.\u003c\/strong\u003e aRacer ECUs and race electronics are sold for closed-course competition, off-road, dyno and development use. They are not CARB-approved or EPA-certified for pollution-controlled vehicles on public roads. You are responsible for complying with the laws that apply to you.\u003c\/p\u003e\u003ch3\u003eDealer support\u003c\/h3\u003e\u003cp\u003eMala Racing is an authorized aRacer SpeedTek dealer. Orders ship from California, and U.S.-based technical support, calibration help and the aRacer calibration database are available through aRacer ECU R\u0026amp;D of America. Not sure about fitment or which accessories you need? Email \u003ca href=\"mailto:malaracingllc@gmail.com\"\u003emalaracingllc@gmail.com\u003c\/a\u003e with your bike, year and mods before you order.\u003c\/p\u003e\u003cp style=\"font-size:0.85em\"\u003e\u003cstrong\u003eCalifornia Proposition 65 WARNING:\u003c\/strong\u003e This product can expose you to chemicals including lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to \u003ca href=\"https:\/\/www.P65Warnings.ca.gov\" rel=\"nofollow\"\u003ewww.P65Warnings.ca.gov\u003c\/a\u003e.\u003c\/p\u003e","brand":"aRacer","offers":[{"title":"Default Title","offer_id":67825014997092,"sku":"PA-B601060AX","price":699.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0656\/3771\/1972\/files\/minixxmgu-zuma_323f1e2e-26c2-422d-9efa-e4fc016ac27c.png?v=1792818668"},{"product_id":"aracer-rc-mini-xx-ecu-yamaha-zuma-125-r-bws-r-125-2015-2017","title":"aRacer RC Mini XX ECU – Yamaha Zuma 125 R \/ BWs R 125 2015–2017","description":"\u003cp\u003eCurrent-generation Mini XX for the Zuma 125 R — fuel, ignition and rev limit for exhaust, intake and big-bore builds.\u003c\/p\u003e\u003cp\u003eThe \u003cstrong\u003eaRacer RC Mini XX\u003c\/strong\u003e is the current-generation Mini: a full-replacement programmable ECU for small-displacement EFI singles, with a faster processor, a stronger 360° Wi-Fi antenna, an RGB status LED and a Quick Burn setup that now takes under a minute. It plugs into the factory harness in place of the stock ECU — not a piggyback — and opens up the fuel and ignition maps the factory unit locks away.\u003c\/p\u003e\u003cp\u003eTune from your phone over Wi-Fi with the aRacer X-Tune app, or go deeper on a PC with SpeedTuningX through the PRO-LINK adapter. \u003cstrong\u003eQuick Burn\u003c\/strong\u003e pulls the latest base calibration for your bike from aRacer’s database, with free calibrations for the common bolt-ons (exhaust, intake, big-bore kits). Stock and lightly modified bikes run well on that alone; add an AF2 or AF3 wideband module and the ECU can AutoTune and run closed-loop on your actual engine.\u003c\/p\u003e\u003ch3\u003eWhat it does\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eFull replacement of the factory ECU; plug-in installation on the stock harness\u003c\/li\u003e\n\u003cli\u003eCurrent-generation Mini hardware: faster MCU, stronger Wi-Fi, RGB status LED, injector tolerance correction\u003c\/li\u003e\n\u003cli\u003eOpen fuel, ignition and target-AFR maps with rev-limit and start\/idle control\u003c\/li\u003e\n\u003cli\u003eWi-Fi tuning from the aRacer X-Tune app (iOS \/ Android) or SpeedTuningX on PC\u003c\/li\u003e\n\u003cli\u003eQuick Burn base calibrations and free bolt-on calibrations from the aRacer database\u003c\/li\u003e\n\u003cli\u003eAutoTune and wideband closed-loop with an AF2 \/ AF3 module\u003c\/li\u003e\n\u003cli\u003eWorks with the R Button, DG2 gauge and Sport D display\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cp\u003eFits the 2015–2017 Yamaha Zuma 125 R \/ BWs R 125. Confirm model year and market version before ordering. The ECU connector and calibration are specific to the model and year, so send us your year and VIN if you are unsure.\u003c\/p\u003e\u003ch3\u003eSetup and tuning\u003c\/h3\u003e\u003cp\u003ePlug the ECU into the factory harness, connect to it over Wi-Fi with the free aRacer X-Tune app and run Quick Burn to load the base calibration for your bike and mods. For full map access on a PC you need SpeedTuningX and the PRO-LINK USB adapter (sold separately). Heavily modified engines should be finished on a dyno by a tuner; aRacer’s U.S. team can also remote-tune from logs.\u003c\/p\u003e\u003ch3\u003eWorks with\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/products\/aracer-af3-wideband-afr-module\"\u003eaRacer AF3 Wideband AFR Module\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/aracer-pro-link-usb-communication-adapter\"\u003eaRacer PRO-LINK USB Communication Adapter\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/aracer-dg2-multi-function-display-gauge\"\u003eaRacer DG2 Multi-Function Display Gauge\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/aracer-r-button\"\u003eaRacer R Button\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/aracer-sport-d-racing-display\"\u003eaRacer Sport D Racing Display\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/aracer-hi-power-max-spark-coil\"\u003eaRacer Hi Power MAX Spark Coil\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart number:\u003c\/strong\u003e PA-B601080AX\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePlatform:\u003c\/strong\u003e aRacer RC Mini XX\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApplication:\u003c\/strong\u003e Yamaha Zuma 125 R \/ BWs R 125 2015–2017\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Full-replacement programmable ECU (plug-in, not piggyback)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnectivity:\u003c\/strong\u003e Built-in Wi-Fi to the aRacer X-Tune app; PC via PRO-LINK\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIn the box:\u003c\/strong\u003e ECU with activation details for the X-Tune app (keep them with the bike)\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eProduct images are aRacer’s renders and may show the same ECU housing as a related model.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eClosed-course competition use only.\u003c\/strong\u003e aRacer ECUs and race electronics are sold for closed-course competition, off-road, dyno and development use. They are not CARB-approved or EPA-certified for pollution-controlled vehicles on public roads. You are responsible for complying with the laws that apply to you.\u003c\/p\u003e\u003ch3\u003eDealer support\u003c\/h3\u003e\u003cp\u003eMala Racing is an authorized aRacer SpeedTek dealer. Orders ship from California, and U.S.-based technical support, calibration help and the aRacer calibration database are available through aRacer ECU R\u0026amp;D of America. Not sure about fitment or which accessories you need? Email \u003ca href=\"mailto:malaracingllc@gmail.com\"\u003emalaracingllc@gmail.com\u003c\/a\u003e with your bike, year and mods before you order.\u003c\/p\u003e\u003cp style=\"font-size:0.85em\"\u003e\u003cstrong\u003eCalifornia Proposition 65 WARNING:\u003c\/strong\u003e This product can expose you to chemicals including lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to \u003ca href=\"https:\/\/www.P65Warnings.ca.gov\" rel=\"nofollow\"\u003ewww.P65Warnings.ca.gov\u003c\/a\u003e.\u003c\/p\u003e","brand":"aRacer","offers":[{"title":"Default Title","offer_id":67825016340580,"sku":"PA-B601080AX","price":499.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0656\/3771\/1972\/files\/minixxzuma17-20.png?v=1792818676"},{"product_id":"aracer-rc-mini-xx-ecu-yamaha-zuma-125-bws-125-2008-2015","title":"aRacer RC Mini XX ECU – Yamaha Zuma 125 \/ BWs 125 2008–2015","description":"\u003cp\u003eCurrent-generation Mini XX for the first fuel-injected Zuma 125 — fuel, ignition and rev limit for exhaust, intake and big-bore builds.\u003c\/p\u003e\u003cp\u003eThe \u003cstrong\u003eaRacer RC Mini XX\u003c\/strong\u003e is the current-generation Mini: a full-replacement programmable ECU for small-displacement EFI singles, with a faster processor, a stronger 360° Wi-Fi antenna, an RGB status LED and a Quick Burn setup that now takes under a minute. It plugs into the factory harness in place of the stock ECU — not a piggyback — and opens up the fuel and ignition maps the factory unit locks away.\u003c\/p\u003e\u003cp\u003eTune from your phone over Wi-Fi with the aRacer X-Tune app, or go deeper on a PC with SpeedTuningX through the PRO-LINK adapter. \u003cstrong\u003eQuick Burn\u003c\/strong\u003e pulls the latest base calibration for your bike from aRacer’s database, with free calibrations for the common bolt-ons (exhaust, intake, big-bore kits). Stock and lightly modified bikes run well on that alone; add an AF2 or AF3 wideband module and the ECU can AutoTune and run closed-loop on your actual engine.\u003c\/p\u003e\u003ch3\u003eWhat it does\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eFull replacement of the factory ECU; plug-in installation on the stock harness\u003c\/li\u003e\n\u003cli\u003eCurrent-generation Mini hardware: faster MCU, stronger Wi-Fi, RGB status LED, injector tolerance correction\u003c\/li\u003e\n\u003cli\u003eOpen fuel, ignition and target-AFR maps with rev-limit and start\/idle control\u003c\/li\u003e\n\u003cli\u003eWi-Fi tuning from the aRacer X-Tune app (iOS \/ Android) or SpeedTuningX on PC\u003c\/li\u003e\n\u003cli\u003eQuick Burn base calibrations and free bolt-on calibrations from the aRacer database\u003c\/li\u003e\n\u003cli\u003eAutoTune and wideband closed-loop with an AF2 \/ AF3 module\u003c\/li\u003e\n\u003cli\u003eWorks with the R Button, DG2 gauge and Sport D display\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cp\u003eFits the 2008–2015 Yamaha Zuma 125 \/ BWs 125. Not for the Zuma 125 R or the 2017+ bikes. The ECU connector and calibration are specific to the model and year, so send us your year and VIN if you are unsure.\u003c\/p\u003e\u003ch3\u003eSetup and tuning\u003c\/h3\u003e\u003cp\u003ePlug the ECU into the factory harness, connect to it over Wi-Fi with the free aRacer X-Tune app and run Quick Burn to load the base calibration for your bike and mods. For full map access on a PC you need SpeedTuningX and the PRO-LINK USB adapter (sold separately). Heavily modified engines should be finished on a dyno by a tuner; aRacer’s U.S. team can also remote-tune from logs.\u003c\/p\u003e\u003ch3\u003eWorks with\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/products\/aracer-af3-wideband-afr-module\"\u003eaRacer AF3 Wideband AFR Module\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/aracer-pro-link-usb-communication-adapter\"\u003eaRacer PRO-LINK USB Communication Adapter\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/aracer-dg2-multi-function-display-gauge\"\u003eaRacer DG2 Multi-Function Display Gauge\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/aracer-r-button\"\u003eaRacer R Button\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/aracer-sport-d-racing-display\"\u003eaRacer Sport D Racing Display\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/aracer-hi-power-max-spark-coil\"\u003eaRacer Hi Power MAX Spark Coil\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart number:\u003c\/strong\u003e PA-B601090AX\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePlatform:\u003c\/strong\u003e aRacer RC Mini XX\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApplication:\u003c\/strong\u003e Yamaha Zuma 125 \/ BWs 125 2008–2015\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Full-replacement programmable ECU (plug-in, not piggyback)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnectivity:\u003c\/strong\u003e Built-in Wi-Fi to the aRacer X-Tune app; PC via PRO-LINK\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIn the box:\u003c\/strong\u003e ECU with activation details for the X-Tune app (keep them with the bike)\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eProduct images are aRacer’s renders and may show the same ECU housing as a related model.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eClosed-course competition use only.\u003c\/strong\u003e aRacer ECUs and race electronics are sold for closed-course competition, off-road, dyno and development use. They are not CARB-approved or EPA-certified for pollution-controlled vehicles on public roads. You are responsible for complying with the laws that apply to you.\u003c\/p\u003e\u003ch3\u003eDealer support\u003c\/h3\u003e\u003cp\u003eMala Racing is an authorized aRacer SpeedTek dealer. Orders ship from California, and U.S.-based technical support, calibration help and the aRacer calibration database are available through aRacer ECU R\u0026amp;D of America. Not sure about fitment or which accessories you need? Email \u003ca href=\"mailto:malaracingllc@gmail.com\"\u003emalaracingllc@gmail.com\u003c\/a\u003e with your bike, year and mods before you order.\u003c\/p\u003e\u003cp style=\"font-size:0.85em\"\u003e\u003cstrong\u003eCalifornia Proposition 65 WARNING:\u003c\/strong\u003e This product can expose you to chemicals including lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to \u003ca href=\"https:\/\/www.P65Warnings.ca.gov\" rel=\"nofollow\"\u003ewww.P65Warnings.ca.gov\u003c\/a\u003e.\u003c\/p\u003e","brand":"aRacer","offers":[{"title":"Default Title","offer_id":67825016373348,"sku":"PA-B601090AX","price":499.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0656\/3771\/1972\/files\/z125minixx_a6b64b5e-74f9-471d-b2a9-5f6b2bf5c439.png?v=1792818676"},{"product_id":"aracer-rc-super-x-pro-ecu-yamaha-zuma-125-r-bws-r-125-2015-2017","title":"aRacer RC Super X PRO ECU – Yamaha Zuma 125 R \/ BWs R 125 2015–2017","description":"\u003cp\u003eRace-level engine management for the Zuma 125 R scooter — open maps plus Race Panel, iMode 5 and Race Module support for a serious scooter-race build.\u003c\/p\u003e\u003cp\u003eThe \u003cstrong\u003eaRacer RC Super X PRO\u003c\/strong\u003e is aRacer’s race-level ECU. It does everything the Mini does — full replacement of the factory ECU, open fuel and ignition maps, Wi-Fi tuning from the X-Tune app or SpeedTuningX on PC, Quick Burn calibrations, AutoTune with a wideband — and adds the hardware and feature set a race bike needs: a faster multi-core processor, finer ignition resolution, more onboard logging memory, an IP67 connection and support for aRacer’s race accessories.\u003c\/p\u003e\u003cp\u003eThat means the \u003cstrong\u003eQSR V2 quick shifter\u003c\/strong\u003e, the \u003cstrong\u003eRace Panel 2\u003c\/strong\u003e and \u003cstrong\u003eiMode 5\u003c\/strong\u003e touchscreen displays, the \u003cstrong\u003e3-Button Race Switch\u003c\/strong\u003e and \u003cstrong\u003eVSS speed sensors\u003c\/strong\u003e for Race Module functions such as launch control, pit limiter and on-the-fly map switching. Mini X \/ Mini XX ECUs cannot run those accessories.\u003c\/p\u003e\u003ch3\u003eWhat it does\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eFull replacement of the factory ECU; plug-in installation on the stock harness\u003c\/li\u003e\n\u003cli\u003eRace-level hardware: multi-core MCU, 0.25° ignition resolution, expanded Fly Recorder logging, IP67 connection\u003c\/li\u003e\n\u003cli\u003eOpen fuel and ignition maps with rev-limit, start\/idle and backfire control\u003c\/li\u003e\n\u003cli\u003eWi-Fi tuning from the aRacer X-Tune app (iOS \/ Android) or SpeedTuningX on PC\u003c\/li\u003e\n\u003cli\u003eQuick Burn base calibrations and free bolt-on calibrations from the aRacer database\u003c\/li\u003e\n\u003cli\u003eAutoTune and wideband closed-loop with an AF2 \/ AF3 module\u003c\/li\u003e\n\u003cli\u003eSupports QSR V2 quick shifter, Race Panel 2, iMode 5, 3-Button Race Switch and VSS (functions vary by application)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cp\u003eFits the 2015–2017 Yamaha Zuma 125 R \/ BWs R 125. Confirm model year and market version before ordering. The ECU connector and calibration are specific to the model and year, so send us your year and VIN if you are unsure.\u003c\/p\u003e\u003ch3\u003eSetup and tuning\u003c\/h3\u003e\u003cp\u003ePlug the ECU into the factory harness, connect to it over Wi-Fi with the free aRacer X-Tune app and run Quick Burn to load the base calibration for your bike and mods. For full map access on a PC you need SpeedTuningX and the PRO-LINK USB adapter (sold separately). Heavily modified engines should be finished on a dyno by a tuner; aRacer’s U.S. team can also remote-tune from logs.\u003c\/p\u003e\u003ch3\u003eWorks with\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/products\/aracer-qsr-v2-quick-shift-race-v2\"\u003eaRacer QSR V2 Quick Shifter\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/aracer-race-panel-2\"\u003eaRacer Race Panel 2\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/aracer-imode-5-controller\"\u003eaRacer iMode 5 Controller\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/aracer-af3-wideband-afr-module\"\u003eaRacer AF3 Wideband AFR Module\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/aracer-pro-link-usb-communication-adapter\"\u003eaRacer PRO-LINK USB Communication Adapter\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/aracer-3-button-race-switch\"\u003eaRacer 3-Button Race Switch\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/aracer-r-button\"\u003eaRacer R Button\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/aracer-dg2-multi-function-display-gauge\"\u003eaRacer DG2 Multi-Function Display Gauge\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart number:\u003c\/strong\u003e PA-B301080DB\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePlatform:\u003c\/strong\u003e aRacer RC Super X PRO\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApplication:\u003c\/strong\u003e Yamaha Zuma 125 R \/ BWs R 125 2015–2017\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Full-replacement programmable ECU (plug-in, not piggyback)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnectivity:\u003c\/strong\u003e Built-in Wi-Fi to the aRacer X-Tune app; PC via PRO-LINK\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIn the box:\u003c\/strong\u003e ECU with activation details for the X-Tune app (keep them with the bike)\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eProduct images are aRacer’s renders and may show the same ECU housing as a related model.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eClosed-course competition use only.\u003c\/strong\u003e aRacer ECUs and race electronics are sold for closed-course competition, off-road, dyno and development use. They are not CARB-approved or EPA-certified for pollution-controlled vehicles on public roads. You are responsible for complying with the laws that apply to you.\u003c\/p\u003e\u003ch3\u003eDealer support\u003c\/h3\u003e\u003cp\u003eMala Racing is an authorized aRacer SpeedTek dealer. Orders ship from California, and U.S.-based technical support, calibration help and the aRacer calibration database are available through aRacer ECU R\u0026amp;D of America. Not sure about fitment or which accessories you need? Email \u003ca href=\"mailto:malaracingllc@gmail.com\"\u003emalaracingllc@gmail.com\u003c\/a\u003e with your bike, year and mods before you order.\u003c\/p\u003e\u003cp style=\"font-size:0.85em\"\u003e\u003cstrong\u003eCalifornia Proposition 65 WARNING:\u003c\/strong\u003e This product can expose you to chemicals including lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to \u003ca href=\"https:\/\/www.P65Warnings.ca.gov\" rel=\"nofollow\"\u003ewww.P65Warnings.ca.gov\u003c\/a\u003e.\u003c\/p\u003e","brand":"aRacer","offers":[{"title":"Default Title","offer_id":67825024368740,"sku":"PA-B301080DB","price":969.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0656\/3771\/1972\/files\/superx_rzr170-4.png?v=1792818722"},{"product_id":"aracer-rc-super-x-pro-ecu-yamaha-r3-2015-2018-mt-03-2016-2019","title":"aRacer RC Super X PRO ECU – Yamaha R3 2015–2018 \/ MT-03 2016–2019","description":"\u003cp\u003eRace-level standalone engine management for the first-generation R3 and MT-03 — open maps, quick shifter support and the Race Module feature set for club racing.\u003c\/p\u003e\u003cp\u003eThe \u003cstrong\u003eaRacer RC Super X PRO\u003c\/strong\u003e is aRacer’s race-level ECU. It does everything the Mini does — full replacement of the factory ECU, open fuel and ignition maps, Wi-Fi tuning from the X-Tune app or SpeedTuningX on PC, Quick Burn calibrations, AutoTune with a wideband — and adds the hardware and feature set a race bike needs: a faster multi-core processor, finer ignition resolution, more onboard logging memory, an IP67 connection and support for aRacer’s race accessories.\u003c\/p\u003e\u003cp\u003eThat means the \u003cstrong\u003eQSR V2 quick shifter\u003c\/strong\u003e, the \u003cstrong\u003eRace Panel 2\u003c\/strong\u003e and \u003cstrong\u003eiMode 5\u003c\/strong\u003e touchscreen displays, the \u003cstrong\u003e3-Button Race Switch\u003c\/strong\u003e and \u003cstrong\u003eVSS speed sensors\u003c\/strong\u003e for Race Module functions such as launch control, pit limiter and on-the-fly map switching. Mini X \/ Mini XX ECUs cannot run those accessories.\u003c\/p\u003e\u003ch3\u003eWhat it does\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eFull replacement of the factory ECU; plug-in installation on the stock harness\u003c\/li\u003e\n\u003cli\u003eRace-level hardware: multi-core MCU, 0.25° ignition resolution, expanded Fly Recorder logging, IP67 connection\u003c\/li\u003e\n\u003cli\u003eOpen fuel and ignition maps with rev-limit, start\/idle and backfire control\u003c\/li\u003e\n\u003cli\u003eWi-Fi tuning from the aRacer X-Tune app (iOS \/ Android) or SpeedTuningX on PC\u003c\/li\u003e\n\u003cli\u003eQuick Burn base calibrations and free bolt-on calibrations from the aRacer database\u003c\/li\u003e\n\u003cli\u003eAutoTune and wideband closed-loop with an AF2 \/ AF3 module\u003c\/li\u003e\n\u003cli\u003eSupports QSR V2 quick shifter, Race Panel 2, iMode 5, 3-Button Race Switch and VSS (functions vary by application)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cp\u003eFits the 2015–2018 Yamaha YZF-R3 and 2016–2019 MT-03. Confirm model year and market version before ordering. The ECU connector and calibration are specific to the model and year, so send us your year and VIN if you are unsure.\u003c\/p\u003e\u003ch3\u003eSetup and tuning\u003c\/h3\u003e\u003cp\u003ePlug the ECU into the factory harness, connect to it over Wi-Fi with the free aRacer X-Tune app and run Quick Burn to load the base calibration for your bike and mods. For full map access on a PC you need SpeedTuningX and the PRO-LINK USB adapter (sold separately). Heavily modified engines should be finished on a dyno by a tuner; aRacer’s U.S. team can also remote-tune from logs.\u003c\/p\u003e\u003ch3\u003eWorks with\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/products\/aracer-qsr-v2-quick-shift-race-v2\"\u003eaRacer QSR V2 Quick Shifter\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/aracer-race-panel-2\"\u003eaRacer Race Panel 2\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/aracer-imode-5-controller\"\u003eaRacer iMode 5 Controller\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/aracer-af3-wideband-afr-module\"\u003eaRacer AF3 Wideband AFR Module\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/aracer-pro-link-usb-communication-adapter\"\u003eaRacer PRO-LINK USB Communication Adapter\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/aracer-3-button-race-switch\"\u003eaRacer 3-Button Race Switch\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/aracer-r-button\"\u003eaRacer R Button\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/aracer-dg2-multi-function-display-gauge\"\u003eaRacer DG2 Multi-Function Display Gauge\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart number:\u003c\/strong\u003e PA-SX043D0\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePlatform:\u003c\/strong\u003e aRacer RC Super X PRO\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApplication:\u003c\/strong\u003e Yamaha R3 2015–2018 \/ MT-03 2016–2019\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Full-replacement programmable ECU (plug-in, not piggyback)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnectivity:\u003c\/strong\u003e Built-in Wi-Fi to the aRacer X-Tune app; PC via PRO-LINK\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIn the box:\u003c\/strong\u003e ECU with activation details for the X-Tune app (keep them with the bike)\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eProduct images are aRacer’s renders and may show the same ECU housing as a related model.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eClosed-course competition use only.\u003c\/strong\u003e aRacer ECUs and race electronics are sold for closed-course competition, off-road, dyno and development use. They are not CARB-approved or EPA-certified for pollution-controlled vehicles on public roads. You are responsible for complying with the laws that apply to you.\u003c\/p\u003e\u003ch3\u003eDealer support\u003c\/h3\u003e\u003cp\u003eMala Racing is an authorized aRacer SpeedTek dealer. Orders ship from California, and U.S.-based technical support, calibration help and the aRacer calibration database are available through aRacer ECU R\u0026amp;D of America. Not sure about fitment or which accessories you need? Email \u003ca href=\"mailto:malaracingllc@gmail.com\"\u003emalaracingllc@gmail.com\u003c\/a\u003e with your bike, year and mods before you order.\u003c\/p\u003e\u003cp style=\"font-size:0.85em\"\u003e\u003cstrong\u003eCalifornia Proposition 65 WARNING:\u003c\/strong\u003e This product can expose you to chemicals including lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to \u003ca href=\"https:\/\/www.P65Warnings.ca.gov\" rel=\"nofollow\"\u003ewww.P65Warnings.ca.gov\u003c\/a\u003e.\u003c\/p\u003e","brand":"aRacer","offers":[{"title":"Default Title","offer_id":67825026596964,"sku":"PA-SX043D0","price":969.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0656\/3771\/1972\/files\/superx_cfr300l-2_b7ea9717-2b4d-412f-88de-deb61f569eb4.png?v=1792818733"},{"product_id":"aracer-rc-mini-x-ecu-yamaha-r3-2015-2018-mt-03-2016-2019","title":"aRacer RC Mini X ECU – Yamaha R3 2015–2018 \/ MT-03 2016–2019","description":"\u003cp\u003eOpen fuel and ignition maps for the first-generation R3 and MT-03 twin without the race-accessory support of the Super X PRO.\u003c\/p\u003e\u003cp\u003eThe \u003cstrong\u003eaRacer RC Mini X\u003c\/strong\u003e is a full-replacement programmable ECU for small-displacement EFI singles. It plugs into the factory harness in place of the stock ECU — it is not a piggyback — and opens up the fuel and ignition maps the factory unit locks away. Tune from your phone over Wi-Fi with the aRacer X-Tune app, or go deeper on a PC with SpeedTuningX through the PRO-LINK adapter.\u003c\/p\u003e\u003cp\u003eEvery ECU starts with a \u003cstrong\u003eQuick Burn\u003c\/strong\u003e: it pulls the latest base calibration for your bike from aRacer’s database in about a minute, with free calibrations for the common bolt-ons (exhaust, intake, big-bore kits). Stock and lightly modified bikes run well on that alone. Add an AF2 or AF3 wideband module and the ECU can AutoTune and run closed-loop on your actual engine.\u003c\/p\u003e\u003ch3\u003eWhat it does\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eFull replacement of the factory ECU; plug-in installation on the stock harness\u003c\/li\u003e\n\u003cli\u003eOpen fuel and ignition maps with rev-limit and start\/idle control\u003c\/li\u003e\n\u003cli\u003eWi-Fi tuning from the aRacer X-Tune app (iOS \/ Android) or SpeedTuningX on PC\u003c\/li\u003e\n\u003cli\u003eQuick Burn base calibrations and free bolt-on calibrations from the aRacer database\u003c\/li\u003e\n\u003cli\u003eAutoTune and wideband closed-loop with an AF2 \/ AF3 module\u003c\/li\u003e\n\u003cli\u003eReal-time engine monitoring in the app\u003c\/li\u003e\n\u003cli\u003eWorks with the R Button, DG2 gauge and Sport D display\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cp\u003eFits the 2015–2018 Yamaha YZF-R3 and 2016–2019 MT-03. Confirm model year and market version before ordering. The ECU connector and calibration are specific to the model and year, so send us your year and VIN if you are unsure.\u003c\/p\u003e\u003ch3\u003eSetup and tuning\u003c\/h3\u003e\u003cp\u003ePlug the ECU into the factory harness, connect to it over Wi-Fi with the free aRacer X-Tune app and run Quick Burn to load the base calibration for your bike and mods. For full map access on a PC you need SpeedTuningX and the PRO-LINK USB adapter (sold separately). Heavily modified engines should be finished on a dyno by a tuner; aRacer’s U.S. team can also remote-tune from logs.\u003c\/p\u003e\u003ch3\u003eWorks with\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/products\/aracer-af3-wideband-afr-module\"\u003eaRacer AF3 Wideband AFR Module\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/aracer-pro-link-usb-communication-adapter\"\u003eaRacer PRO-LINK USB Communication Adapter\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/aracer-dg2-multi-function-display-gauge\"\u003eaRacer DG2 Multi-Function Display Gauge\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/aracer-r-button\"\u003eaRacer R Button\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/aracer-sport-d-racing-display\"\u003eaRacer Sport D Racing Display\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/aracer-hi-power-max-spark-coil\"\u003eaRacer Hi Power MAX Spark Coil\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart number:\u003c\/strong\u003e PA-CX051A0\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePlatform:\u003c\/strong\u003e aRacer RC Mini X\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApplication:\u003c\/strong\u003e Yamaha R3 2015–2018 \/ MT-03 2016–2019\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Full-replacement programmable ECU (plug-in, not piggyback)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnectivity:\u003c\/strong\u003e Built-in Wi-Fi to the aRacer X-Tune app; PC via PRO-LINK\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIn the box:\u003c\/strong\u003e ECU with activation details for the X-Tune app (keep them with the bike)\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eProduct images are aRacer’s renders and may show the same ECU housing as a related model.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eClosed-course competition use only.\u003c\/strong\u003e aRacer ECUs and race electronics are sold for closed-course competition, off-road, dyno and development use. They are not CARB-approved or EPA-certified for pollution-controlled vehicles on public roads. You are responsible for complying with the laws that apply to you.\u003c\/p\u003e\u003ch3\u003eDealer support\u003c\/h3\u003e\u003cp\u003eMala Racing is an authorized aRacer SpeedTek dealer. Orders ship from California, and U.S.-based technical support, calibration help and the aRacer calibration database are available through aRacer ECU R\u0026amp;D of America. Not sure about fitment or which accessories you need? Email \u003ca href=\"mailto:malaracingllc@gmail.com\"\u003emalaracingllc@gmail.com\u003c\/a\u003e with your bike, year and mods before you order.\u003c\/p\u003e\u003cp style=\"font-size:0.85em\"\u003e\u003cstrong\u003eCalifornia Proposition 65 WARNING:\u003c\/strong\u003e This product can expose you to chemicals including lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to \u003ca href=\"https:\/\/www.P65Warnings.ca.gov\" rel=\"nofollow\"\u003ewww.P65Warnings.ca.gov\u003c\/a\u003e.\u003c\/p\u003e","brand":"aRacer","offers":[{"title":"Default Title","offer_id":67825026629732,"sku":"PA-CX051A0","price":499.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0656\/3771\/1972\/files\/minix_r3_2015-4.png?v=1792818734"},{"product_id":"aracer-rc-mini-xx-ecu-yamaha-zuma-125-cygnus-125-2017-2020","title":"aRacer RC Mini XX ECU – Yamaha Zuma 125 \/ Cygnus 125 2017–2020","description":"\u003cp\u003eCurrent-generation Mini XX for the 2017–2020 Zuma 125 (Cygnus \/ BWs R in other markets) — fuel, ignition and rev limit for exhaust, intake and big-bore builds.\u003c\/p\u003e\u003cp\u003eThe \u003cstrong\u003eaRacer RC Mini XX\u003c\/strong\u003e is the current-generation Mini: a full-replacement programmable ECU for small-displacement EFI singles, with a faster processor, a stronger 360° Wi-Fi antenna, an RGB status LED and a Quick Burn setup that now takes under a minute. It plugs into the factory harness in place of the stock ECU — not a piggyback — and opens up the fuel and ignition maps the factory unit locks away.\u003c\/p\u003e\u003cp\u003eTune from your phone over Wi-Fi with the aRacer X-Tune app, or go deeper on a PC with SpeedTuningX through the PRO-LINK adapter. \u003cstrong\u003eQuick Burn\u003c\/strong\u003e pulls the latest base calibration for your bike from aRacer’s database, with free calibrations for the common bolt-ons (exhaust, intake, big-bore kits). Stock and lightly modified bikes run well on that alone; add an AF2 or AF3 wideband module and the ECU can AutoTune and run closed-loop on your actual engine.\u003c\/p\u003e\u003ch3\u003eWhat it does\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eFull replacement of the factory ECU; plug-in installation on the stock harness\u003c\/li\u003e\n\u003cli\u003eCurrent-generation Mini hardware: faster MCU, stronger Wi-Fi, RGB status LED, injector tolerance correction\u003c\/li\u003e\n\u003cli\u003eOpen fuel, ignition and target-AFR maps with rev-limit and start\/idle control\u003c\/li\u003e\n\u003cli\u003eWi-Fi tuning from the aRacer X-Tune app (iOS \/ Android) or SpeedTuningX on PC\u003c\/li\u003e\n\u003cli\u003eQuick Burn base calibrations and free bolt-on calibrations from the aRacer database\u003c\/li\u003e\n\u003cli\u003eAutoTune and wideband closed-loop with an AF2 \/ AF3 module\u003c\/li\u003e\n\u003cli\u003eWorks with the R Button, DG2 gauge and Sport D display\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cp\u003eFits the 2017–2020 Yamaha Zuma 125 \/ Cygnus 125. Not for the 2020+ bike with the new engine — see the 2020+ listing. The ECU connector and calibration are specific to the model and year, so send us your year and VIN if you are unsure.\u003c\/p\u003e\u003ch3\u003eSetup and tuning\u003c\/h3\u003e\u003cp\u003ePlug the ECU into the factory harness, connect to it over Wi-Fi with the free aRacer X-Tune app and run Quick Burn to load the base calibration for your bike and mods. For full map access on a PC you need SpeedTuningX and the PRO-LINK USB adapter (sold separately). Heavily modified engines should be finished on a dyno by a tuner; aRacer’s U.S. team can also remote-tune from logs.\u003c\/p\u003e\u003ch3\u003eWorks with\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/products\/aracer-af3-wideband-afr-module\"\u003eaRacer AF3 Wideband AFR Module\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/aracer-pro-link-usb-communication-adapter\"\u003eaRacer PRO-LINK USB Communication Adapter\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/aracer-dg2-multi-function-display-gauge\"\u003eaRacer DG2 Multi-Function Display Gauge\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/aracer-r-button\"\u003eaRacer R Button\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/aracer-sport-d-racing-display\"\u003eaRacer Sport D Racing Display\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/aracer-hi-power-max-spark-coil\"\u003eaRacer Hi Power MAX Spark Coil\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart number:\u003c\/strong\u003e PA-B601030AX\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePlatform:\u003c\/strong\u003e aRacer RC Mini XX\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApplication:\u003c\/strong\u003e Yamaha Zuma 125 \/ Cygnus 125 2017–2020\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Full-replacement programmable ECU (plug-in, not piggyback)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnectivity:\u003c\/strong\u003e Built-in Wi-Fi to the aRacer X-Tune app; PC via PRO-LINK\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIn the box:\u003c\/strong\u003e ECU with activation details for the X-Tune app (keep them with the bike)\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eProduct images are aRacer’s renders and may show the same ECU housing as a related model.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eClosed-course competition use only.\u003c\/strong\u003e aRacer ECUs and race electronics are sold for closed-course competition, off-road, dyno and development use. They are not CARB-approved or EPA-certified for pollution-controlled vehicles on public roads. You are responsible for complying with the laws that apply to you.\u003c\/p\u003e\u003ch3\u003eDealer support\u003c\/h3\u003e\u003cp\u003eMala Racing is an authorized aRacer SpeedTek dealer. Orders ship from California, and U.S.-based technical support, calibration help and the aRacer calibration database are available through aRacer ECU R\u0026amp;D of America. Not sure about fitment or which accessories you need? Email \u003ca href=\"mailto:malaracingllc@gmail.com\"\u003emalaracingllc@gmail.com\u003c\/a\u003e with your bike, year and mods before you order.\u003c\/p\u003e\u003cp style=\"font-size:0.85em\"\u003e\u003cstrong\u003eCalifornia Proposition 65 WARNING:\u003c\/strong\u003e This product can expose you to chemicals including lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to \u003ca href=\"https:\/\/www.P65Warnings.ca.gov\" rel=\"nofollow\"\u003ewww.P65Warnings.ca.gov\u003c\/a\u003e.\u003c\/p\u003e","brand":"aRacer","offers":[{"title":"Default Title","offer_id":67825033379940,"sku":"PA-B601030AX","price":499.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0656\/3771\/1972\/files\/minixxzuma17-20_8db52632-c4d1-4628-bc76-9691881c3081.png?v=1792818773"},{"product_id":"aracer-rc-super-xx-ecu-yamaha-yzf-r7-2022","title":"aRacer RC Super XX ECU – Yamaha YZF-R7 2022+","description":"\u003cp\u003eLatest-generation standalone engine management for the R7 — open maps for full-exhaust and intake builds, quick shifter and Race Module support for Twins Cup-style racing.\u003c\/p\u003e\u003cp\u003eThe \u003cstrong\u003eaRacer RC Super XX\u003c\/strong\u003e is the latest generation of aRacer’s race-level ECU, here for the Yamaha CP2 twin. It fully replaces the factory ECU on the stock harness — not a piggyback — and opens up the fuel and ignition maps the factory unit locks away. Tune from your phone over Wi-Fi with the aRacer X-Tune app, or go deeper on a PC with SpeedTuningX through the PRO-LINK adapter; Quick Burn loads a base calibration for your bike and common mods from aRacer’s database.\u003c\/p\u003e\u003cp\u003eAs a Super-platform ECU it supports aRacer’s race accessories: the \u003cstrong\u003eQSR V2 quick shifter\u003c\/strong\u003e, the \u003cstrong\u003eRace Panel 2\u003c\/strong\u003e and \u003cstrong\u003eiMode 5\u003c\/strong\u003e touchscreen displays, the \u003cstrong\u003e3-Button Race Switch\u003c\/strong\u003e and \u003cstrong\u003eVSS speed sensors\u003c\/strong\u003e for Race Module functions such as launch control, pit limiter and map switching. Heavily modified engines should be tuned by a professional on a dyno.\u003c\/p\u003e\u003ch3\u003eWhat it does\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eFull replacement of the factory ECU; plug-in installation on the stock harness\u003c\/li\u003e\n\u003cli\u003eLatest-generation Super hardware: multi-core MCU, fine ignition resolution, expanded Fly Recorder logging, IP67 connection\u003c\/li\u003e\n\u003cli\u003eOpen fuel and ignition maps with rev-limit, start\/idle and backfire control\u003c\/li\u003e\n\u003cli\u003eWi-Fi tuning from the aRacer X-Tune app (iOS \/ Android) or SpeedTuningX on PC\u003c\/li\u003e\n\u003cli\u003eQuick Burn base calibrations and free bolt-on calibrations from the aRacer database\u003c\/li\u003e\n\u003cli\u003eAutoTune and wideband closed-loop with an AF2 \/ AF3 module (per-cylinder where supported)\u003c\/li\u003e\n\u003cli\u003eSupports QSR V2 quick shifter, Race Panel 2, iMode 5, 3-Button Race Switch and VSS (functions vary by application)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cp\u003eFits the 2022-and-later Yamaha YZF-R7. Confirm model year and market version before ordering. The ECU connector and calibration are specific to the model and year, so send us your year and VIN if you are unsure.\u003c\/p\u003e\u003ch3\u003eSetup and tuning\u003c\/h3\u003e\u003cp\u003ePlug the ECU into the factory harness, connect to it over Wi-Fi with the free aRacer X-Tune app and run Quick Burn to load the base calibration for your bike and mods. For full map access on a PC you need SpeedTuningX and the PRO-LINK USB adapter (sold separately). Heavily modified engines should be finished on a dyno by a tuner; aRacer’s U.S. team can also remote-tune from logs.\u003c\/p\u003e\u003ch3\u003eWorks with\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/products\/aracer-qsr-v2-quick-shift-race-v2\"\u003eaRacer QSR V2 Quick Shifter\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/aracer-race-panel-2\"\u003eaRacer Race Panel 2\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/aracer-imode-5-controller\"\u003eaRacer iMode 5 Controller\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/aracer-af3-wideband-afr-module\"\u003eaRacer AF3 Wideband AFR Module\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/aracer-pro-link-usb-communication-adapter\"\u003eaRacer PRO-LINK USB Communication Adapter\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/aracer-3-button-race-switch\"\u003eaRacer 3-Button Race Switch\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/aracer-r-button\"\u003eaRacer R Button\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart number:\u003c\/strong\u003e PA-B301580DB\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePlatform:\u003c\/strong\u003e aRacer RC Super XX\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApplication:\u003c\/strong\u003e Yamaha YZF-R7 2022+\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Full-replacement programmable ECU (plug-in, not piggyback)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnectivity:\u003c\/strong\u003e Built-in Wi-Fi to the aRacer X-Tune app; PC via PRO-LINK\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIn the box:\u003c\/strong\u003e ECU with activation details for the X-Tune app (keep them with the bike)\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eProduct images are aRacer’s renders and may show the same ECU housing as a related model.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eClosed-course competition use only.\u003c\/strong\u003e aRacer ECUs and race electronics are sold for closed-course competition, off-road, dyno and development use. They are not CARB-approved or EPA-certified for pollution-controlled vehicles on public roads. You are responsible for complying with the laws that apply to you.\u003c\/p\u003e\u003ch3\u003eDealer support\u003c\/h3\u003e\u003cp\u003eMala Racing is an authorized aRacer SpeedTek dealer. Orders ship from California, and U.S.-based technical support, calibration help and the aRacer calibration database are available through aRacer ECU R\u0026amp;D of America. Not sure about fitment or which accessories you need? Email \u003ca href=\"mailto:malaracingllc@gmail.com\"\u003emalaracingllc@gmail.com\u003c\/a\u003e with your bike, year and mods before you order.\u003c\/p\u003e\u003cp style=\"font-size:0.85em\"\u003e\u003cstrong\u003eCalifornia Proposition 65 WARNING:\u003c\/strong\u003e This product can expose you to chemicals including lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to \u003ca href=\"https:\/\/www.P65Warnings.ca.gov\" rel=\"nofollow\"\u003ewww.P65Warnings.ca.gov\u003c\/a\u003e.\u003c\/p\u003e","brand":"aRacer","offers":[{"title":"Default Title","offer_id":67825034559588,"sku":"PA-B301580DB","price":1099.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0656\/3771\/1972\/files\/r7-3_1e3ab5e0-833b-4695-b871-0e5f71fa2699.png?v=1792818783"},{"product_id":"aracer-af3-wideband-afr-module","title":"aRacer AF3 Wideband AFR Module","description":"\u003cp\u003eThe \u003cstrong\u003eaRacer AF3\u003c\/strong\u003e is the wideband oxygen module that turns an aRacer ECU from a programmable box into a self-tuning one. It feeds real air-fuel ratio back to the ECU so you can run \u003cstrong\u003eAutoTune\u003c\/strong\u003e (the ECU builds the fuel map on your engine while you ride or dyno it), then wideband closed-loop control once the map is learned, plus high-speed AFR logging for anyone finishing a calibration properly.\u003c\/p\u003e\u003cp\u003eThe AF3 is the current, high-speed module and the one to buy with any X or XX generation ECU (Mini X, Mini XX, Super X, Super XX). Earlier aRacer ECUs need the AF2 instead. On multi-cylinder Super ECUs it supports per-cylinder AutoTune where the hardware and calibration allow.\u003c\/p\u003e\u003ch3\u003eHow to use it\u003c\/h3\u003e\u003cp\u003eaRacer’s recommended workflow: run AutoTune to build the calibration, key off to save the learned corrections, turn AutoTune off, then enable wideband closed-loop. AutoTune draws more current than normal running, so keep an eye on small batteries and long low-RPM sessions.\u003c\/p\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eWideband air-fuel ratio monitoring and logging\u003c\/li\u003e\n\u003cli\u003eAutoTune Pro support on compatible ECUs; per-cylinder where supported\u003c\/li\u003e\n\u003cli\u003eWideband closed-loop fuel correction\u003c\/li\u003e\n\u003cli\u003eDisplays live AFR on the DG2 gauge or Race Panel 2 \/ iMode 5\u003c\/li\u003e\n\u003cli\u003eFor dyno tuning, track testing and development\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eCompatibility\u003c\/h3\u003e\u003cp\u003eaRacer RC Super X, Super XX, Mini X and Mini XX ECUs. Requires a wideband sensor bung in the exhaust. Older aRacer platforms: use the AF2.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart number:\u003c\/strong\u003e PD-G0070\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Wideband AFR \/ lambda module\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApplications:\u003c\/strong\u003e Motorcycle, ATV, UTV\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eClosed-course competition use only.\u003c\/strong\u003e aRacer ECUs and race electronics are sold for closed-course competition, off-road, dyno and development use. They are not CARB-approved or EPA-certified for pollution-controlled vehicles on public roads. You are responsible for complying with the laws that apply to you.\u003c\/p\u003e\u003ch3\u003eDealer support\u003c\/h3\u003e\u003cp\u003eMala Racing is an authorized aRacer SpeedTek dealer. Orders ship from California, and U.S.-based technical support, calibration help and the aRacer calibration database are available through aRacer ECU R\u0026amp;D of America. Not sure about fitment or which accessories you need? Email \u003ca href=\"mailto:malaracingllc@gmail.com\"\u003emalaracingllc@gmail.com\u003c\/a\u003e with your bike, year and mods before you order.\u003c\/p\u003e\u003cp style=\"font-size:0.85em\"\u003e\u003cstrong\u003eCalifornia Proposition 65 WARNING:\u003c\/strong\u003e This product can expose you to chemicals including lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to \u003ca href=\"https:\/\/www.P65Warnings.ca.gov\" rel=\"nofollow\"\u003ewww.P65Warnings.ca.gov\u003c\/a\u003e.\u003c\/p\u003e","brand":"aRacer","offers":[{"title":"Default Title","offer_id":67825039147108,"sku":"PD-G0070","price":399.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0656\/3771\/1972\/files\/af3.png?v=1792818822"},{"product_id":"aracer-rc-super-x-pro-ecu-benelli-tnt-135-2019","title":"aRacer RC Super X PRO ECU – Benelli TNT 135 2019+","description":"\u003cp\u003eRace-level engine management for the TNT 135: open maps plus quick shifter, Race Panel and Race Module support.\u003c\/p\u003e\u003cp\u003eThe \u003cstrong\u003eaRacer RC Super X PRO\u003c\/strong\u003e is aRacer’s race-level ECU. It does everything the Mini does — full replacement of the factory ECU, open fuel and ignition maps, Wi-Fi tuning from the X-Tune app or SpeedTuningX on PC, Quick Burn calibrations, AutoTune with a wideband — and adds the hardware and feature set a race bike needs: a faster multi-core processor, finer ignition resolution, more onboard logging memory, an IP67 connection and support for aRacer’s race accessories.\u003c\/p\u003e\u003cp\u003eThat means the \u003cstrong\u003eQSR V2 quick shifter\u003c\/strong\u003e, the \u003cstrong\u003eRace Panel 2\u003c\/strong\u003e and \u003cstrong\u003eiMode 5\u003c\/strong\u003e touchscreen displays, the \u003cstrong\u003e3-Button Race Switch\u003c\/strong\u003e and \u003cstrong\u003eVSS speed sensors\u003c\/strong\u003e for Race Module functions such as launch control, pit limiter and on-the-fly map switching. Mini X \/ Mini XX ECUs cannot run those accessories.\u003c\/p\u003e\u003ch3\u003eWhat it does\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eFull replacement of the factory ECU; plug-in installation on the stock harness\u003c\/li\u003e\n\u003cli\u003eRace-level hardware: multi-core MCU, 0.25° ignition resolution, expanded Fly Recorder logging, IP67 connection\u003c\/li\u003e\n\u003cli\u003eOpen fuel and ignition maps with rev-limit, start\/idle and backfire control\u003c\/li\u003e\n\u003cli\u003eWi-Fi tuning from the aRacer X-Tune app (iOS \/ Android) or SpeedTuningX on PC\u003c\/li\u003e\n\u003cli\u003eQuick Burn base calibrations and free bolt-on calibrations from the aRacer database\u003c\/li\u003e\n\u003cli\u003eAutoTune and wideband closed-loop with an AF2 \/ AF3 module\u003c\/li\u003e\n\u003cli\u003eSupports QSR V2 quick shifter, Race Panel 2, iMode 5, 3-Button Race Switch and VSS (functions vary by application)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cp\u003eFits the 2019-and-later Benelli TNT 135. Confirm model year and market version before ordering. The ECU connector and calibration are specific to the model and year, so send us your year and VIN if you are unsure.\u003c\/p\u003e\u003ch3\u003eSetup and tuning\u003c\/h3\u003e\u003cp\u003ePlug the ECU into the factory harness, connect to it over Wi-Fi with the free aRacer X-Tune app and run Quick Burn to load the base calibration for your bike and mods. For full map access on a PC you need SpeedTuningX and the PRO-LINK USB adapter (sold separately). Heavily modified engines should be finished on a dyno by a tuner; aRacer’s U.S. team can also remote-tune from logs.\u003c\/p\u003e\u003ch3\u003eWorks with\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/products\/aracer-qsr-v2-quick-shift-race-v2\"\u003eaRacer QSR V2 Quick Shifter\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/aracer-race-panel-2\"\u003eaRacer Race Panel 2\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/aracer-imode-5-controller\"\u003eaRacer iMode 5 Controller\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/aracer-af3-wideband-afr-module\"\u003eaRacer AF3 Wideband AFR Module\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/aracer-pro-link-usb-communication-adapter\"\u003eaRacer PRO-LINK USB Communication Adapter\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/aracer-3-button-race-switch\"\u003eaRacer 3-Button Race Switch\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/aracer-r-button\"\u003eaRacer R Button\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/aracer-dg2-multi-function-display-gauge\"\u003eaRacer DG2 Multi-Function Display Gauge\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart number:\u003c\/strong\u003e PA-SX066D0\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePlatform:\u003c\/strong\u003e aRacer RC Super X PRO\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApplication:\u003c\/strong\u003e Benelli TNT 135 2019+\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Full-replacement programmable ECU (plug-in, not piggyback)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnectivity:\u003c\/strong\u003e Built-in Wi-Fi to the aRacer X-Tune app; PC via PRO-LINK\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIn the box:\u003c\/strong\u003e ECU with activation details for the X-Tune app (keep them with the bike)\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eProduct images are aRacer’s renders and may show the same ECU housing as a related model.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eClosed-course competition use only.\u003c\/strong\u003e aRacer ECUs and race electronics are sold for closed-course competition, off-road, dyno and development use. They are not CARB-approved or EPA-certified for pollution-controlled vehicles on public roads. You are responsible for complying with the laws that apply to you.\u003c\/p\u003e\u003ch3\u003eDealer support\u003c\/h3\u003e\u003cp\u003eMala Racing is an authorized aRacer SpeedTek dealer. Orders ship from California, and U.S.-based technical support, calibration help and the aRacer calibration database are available through aRacer ECU R\u0026amp;D of America. Not sure about fitment or which accessories you need? Email \u003ca href=\"mailto:malaracingllc@gmail.com\"\u003emalaracingllc@gmail.com\u003c\/a\u003e with your bike, year and mods before you order.\u003c\/p\u003e\u003cp style=\"font-size:0.85em\"\u003e\u003cstrong\u003eCalifornia Proposition 65 WARNING:\u003c\/strong\u003e This product can expose you to chemicals including lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to \u003ca href=\"https:\/\/www.P65Warnings.ca.gov\" rel=\"nofollow\"\u003ewww.P65Warnings.ca.gov\u003c\/a\u003e.\u003c\/p\u003e","brand":"aRacer","offers":[{"title":"Default Title","offer_id":67825039736932,"sku":"PA-SX066D0","price":969.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0656\/3771\/1972\/files\/benellisuperx-4.png?v=1792818826"},{"product_id":"aracer-rc-mini-x-ecu-benelli-tnt-135-2019","title":"aRacer RC Mini X ECU – Benelli TNT 135 2019+","description":"\u003cp\u003eOpen fuel and ignition maps for the TNT 135 — exhaust, intake and big-bore builds without the race-accessory support of the Super X PRO.\u003c\/p\u003e\u003cp\u003eThe \u003cstrong\u003eaRacer RC Mini X\u003c\/strong\u003e is a full-replacement programmable ECU for small-displacement EFI singles. It plugs into the factory harness in place of the stock ECU — it is not a piggyback — and opens up the fuel and ignition maps the factory unit locks away. Tune from your phone over Wi-Fi with the aRacer X-Tune app, or go deeper on a PC with SpeedTuningX through the PRO-LINK adapter.\u003c\/p\u003e\u003cp\u003eEvery ECU starts with a \u003cstrong\u003eQuick Burn\u003c\/strong\u003e: it pulls the latest base calibration for your bike from aRacer’s database in about a minute, with free calibrations for the common bolt-ons (exhaust, intake, big-bore kits). Stock and lightly modified bikes run well on that alone. Add an AF2 or AF3 wideband module and the ECU can AutoTune and run closed-loop on your actual engine.\u003c\/p\u003e\u003ch3\u003eWhat it does\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eFull replacement of the factory ECU; plug-in installation on the stock harness\u003c\/li\u003e\n\u003cli\u003eOpen fuel and ignition maps with rev-limit and start\/idle control\u003c\/li\u003e\n\u003cli\u003eWi-Fi tuning from the aRacer X-Tune app (iOS \/ Android) or SpeedTuningX on PC\u003c\/li\u003e\n\u003cli\u003eQuick Burn base calibrations and free bolt-on calibrations from the aRacer database\u003c\/li\u003e\n\u003cli\u003eAutoTune and wideband closed-loop with an AF2 \/ AF3 module\u003c\/li\u003e\n\u003cli\u003eReal-time engine monitoring in the app\u003c\/li\u003e\n\u003cli\u003eWorks with the R Button, DG2 gauge and Sport D display\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cp\u003eFits the 2019-and-later Benelli TNT 135. Confirm model year and market version before ordering. The ECU connector and calibration are specific to the model and year, so send us your year and VIN if you are unsure.\u003c\/p\u003e\u003ch3\u003eSetup and tuning\u003c\/h3\u003e\u003cp\u003ePlug the ECU into the factory harness, connect to it over Wi-Fi with the free aRacer X-Tune app and run Quick Burn to load the base calibration for your bike and mods. For full map access on a PC you need SpeedTuningX and the PRO-LINK USB adapter (sold separately). Heavily modified engines should be finished on a dyno by a tuner; aRacer’s U.S. team can also remote-tune from logs.\u003c\/p\u003e\u003ch3\u003eWorks with\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/products\/aracer-af3-wideband-afr-module\"\u003eaRacer AF3 Wideband AFR Module\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/aracer-pro-link-usb-communication-adapter\"\u003eaRacer PRO-LINK USB Communication Adapter\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/aracer-dg2-multi-function-display-gauge\"\u003eaRacer DG2 Multi-Function Display Gauge\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/aracer-r-button\"\u003eaRacer R Button\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/aracer-sport-d-racing-display\"\u003eaRacer Sport D Racing Display\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/aracer-hi-power-max-spark-coil\"\u003eaRacer Hi Power MAX Spark Coil\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart number:\u003c\/strong\u003e PA-CX073A0\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePlatform:\u003c\/strong\u003e aRacer RC Mini X\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApplication:\u003c\/strong\u003e Benelli TNT 135 2019+\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Full-replacement programmable ECU (plug-in, not piggyback)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnectivity:\u003c\/strong\u003e Built-in Wi-Fi to the aRacer X-Tune app; PC via PRO-LINK\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIn the box:\u003c\/strong\u003e ECU with activation details for the X-Tune app (keep them with the bike)\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eProduct images are aRacer’s renders and may show the same ECU housing as a related model.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eClosed-course competition use only.\u003c\/strong\u003e aRacer ECUs and race electronics are sold for closed-course competition, off-road, dyno and development use. They are not CARB-approved or EPA-certified for pollution-controlled vehicles on public roads. You are responsible for complying with the laws that apply to you.\u003c\/p\u003e\u003ch3\u003eDealer support\u003c\/h3\u003e\u003cp\u003eMala Racing is an authorized aRacer SpeedTek dealer. Orders ship from California, and U.S.-based technical support, calibration help and the aRacer calibration database are available through aRacer ECU R\u0026amp;D of America. Not sure about fitment or which accessories you need? Email \u003ca href=\"mailto:malaracingllc@gmail.com\"\u003emalaracingllc@gmail.com\u003c\/a\u003e with your bike, year and mods before you order.\u003c\/p\u003e\u003cp style=\"font-size:0.85em\"\u003e\u003cstrong\u003eCalifornia Proposition 65 WARNING:\u003c\/strong\u003e This product can expose you to chemicals including lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to \u003ca href=\"https:\/\/www.P65Warnings.ca.gov\" rel=\"nofollow\"\u003ewww.P65Warnings.ca.gov\u003c\/a\u003e.\u003c\/p\u003e","brand":"aRacer","offers":[{"title":"Default Title","offer_id":67825040359524,"sku":"PA-CX073A0","price":499.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0656\/3771\/1972\/files\/benelliminix-4.png?v=1792818831"},{"product_id":"aracer-af2-wideband-afr-module","title":"aRacer AF2 Wideband AFR Module","description":"\u003cp\u003eThe \u003cstrong\u003eaRacer AF2\u003c\/strong\u003e is the previous-generation wideband oxygen module. It does the same job as the AF3 — feeds real air-fuel ratio to the ECU for \u003cstrong\u003eAutoTune\u003c\/strong\u003e, closed-loop fuel control and AFR logging — and is the module to buy if you are running an \u003cstrong\u003eolder aRacer ECU\u003c\/strong\u003e (RC Super 2, RC Mini 5, Mini 5 Plus 2, RC1 Super) that the AF3 does not support. It also works with the current Mini X \/ XX and Super X \/ XX.\u003c\/p\u003e\u003cp\u003eBuying a new X \/ XX generation ECU? Get the AF3 — it is the faster module at the same price.\u003c\/p\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eWideband air-fuel ratio monitoring and logging\u003c\/li\u003e\n\u003cli\u003eAutoTune support on compatible ECUs\u003c\/li\u003e\n\u003cli\u003eWideband closed-loop fuel correction\u003c\/li\u003e\n\u003cli\u003eDisplays live AFR on the DG2 gauge or compatible aRacer displays\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eCompatibility\u003c\/h3\u003e\u003cp\u003eaRacer RC Super 2, RC Mini 5, Mini 5 Plus 2, RC1 Super, RC Super X, RC Super XX, RC Mini X and RC Mini XX. Requires a wideband sensor bung in the exhaust.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart number:\u003c\/strong\u003e US-LEG-AF2\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Wideband AFR \/ lambda module\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eClosed-course competition use only.\u003c\/strong\u003e aRacer ECUs and race electronics are sold for closed-course competition, off-road, dyno and development use. They are not CARB-approved or EPA-certified for pollution-controlled vehicles on public roads. You are responsible for complying with the laws that apply to you.\u003c\/p\u003e\u003ch3\u003eDealer support\u003c\/h3\u003e\u003cp\u003eMala Racing is an authorized aRacer SpeedTek dealer. Orders ship from California, and U.S.-based technical support, calibration help and the aRacer calibration database are available through aRacer ECU R\u0026amp;D of America. Not sure about fitment or which accessories you need? Email \u003ca href=\"mailto:malaracingllc@gmail.com\"\u003emalaracingllc@gmail.com\u003c\/a\u003e with your bike, year and mods before you order.\u003c\/p\u003e\u003cp style=\"font-size:0.85em\"\u003e\u003cstrong\u003eCalifornia Proposition 65 WARNING:\u003c\/strong\u003e This product can expose you to chemicals including lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to \u003ca href=\"https:\/\/www.P65Warnings.ca.gov\" rel=\"nofollow\"\u003ewww.P65Warnings.ca.gov\u003c\/a\u003e.\u003c\/p\u003e","brand":"aRacer","offers":[{"title":"Default Title","offer_id":67825043964004,"sku":"US-LEG-AF2","price":399.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0656\/3771\/1972\/files\/af2-3.png?v=1792818860"},{"product_id":"aracer-imode-5-controller","title":"aRacer iMode 5 Controller","description":"\u003cp\u003eThe \u003cstrong\u003eiMode 5\u003c\/strong\u003e is a 3.5-inch full-color touchscreen that mounts on the bars and gives the rider live ECU data and direct control of supported ECU functions — map switching, race functions, warnings — without reaching for a phone. Anodized aluminum body, fully bonded 6H glass, IP67.\u003c\/p\u003e\u003cp\u003eIt is a Super-platform accessory: it works with \u003cstrong\u003eRC Super X and RC Super XX\u003c\/strong\u003e ECUs only. Mini X \/ Mini XX owners should look at the Sport D or DG2.\u003c\/p\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e3.5-inch full-color TFT touchscreen\u003c\/li\u003e\n\u003cli\u003eAnodized aluminum alloy body with aluminum back cover\u003c\/li\u003e\n\u003cli\u003eFully bonded 6H high-hardness glass\u003c\/li\u003e\n\u003cli\u003eIP67 water resistance\u003c\/li\u003e\n\u003cli\u003eLive ECU and engine data plus rider-accessible function control\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eIn the box\u003c\/h3\u003e\u003cp\u003eiMode 5 controller and extension cable. ECU, bracket, PRO-LINK, AF3 and other modules are not included.\u003c\/p\u003e\u003ch3\u003eCompatibility\u003c\/h3\u003e\u003cp\u003eaRacer RC Super X and RC Super XX ECUs. Not for Mini X \/ Mini XX or platforms that predate RC Super X.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart number:\u003c\/strong\u003e PD-IM010\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDisplay:\u003c\/strong\u003e 3.5-inch TFT touchscreen\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRating:\u003c\/strong\u003e IP67\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eClosed-course competition use only.\u003c\/strong\u003e aRacer ECUs and race electronics are sold for closed-course competition, off-road, dyno and development use. They are not CARB-approved or EPA-certified for pollution-controlled vehicles on public roads. You are responsible for complying with the laws that apply to you.\u003c\/p\u003e\u003ch3\u003eDealer support\u003c\/h3\u003e\u003cp\u003eMala Racing is an authorized aRacer SpeedTek dealer. Orders ship from California, and U.S.-based technical support, calibration help and the aRacer calibration database are available through aRacer ECU R\u0026amp;D of America. Not sure about fitment or which accessories you need? Email \u003ca href=\"mailto:malaracingllc@gmail.com\"\u003emalaracingllc@gmail.com\u003c\/a\u003e with your bike, year and mods before you order.\u003c\/p\u003e\u003cp style=\"font-size:0.85em\"\u003e\u003cstrong\u003eCalifornia Proposition 65 WARNING:\u003c\/strong\u003e This product can expose you to chemicals including lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to \u003ca href=\"https:\/\/www.P65Warnings.ca.gov\" rel=\"nofollow\"\u003ewww.P65Warnings.ca.gov\u003c\/a\u003e.\u003c\/p\u003e","brand":"aRacer","offers":[{"title":"Default Title","offer_id":67825043996772,"sku":"PD-IM010","price":399.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0656\/3771\/1972\/files\/imode5-2.png?v=1792818861"},{"product_id":"aracer-pro-link-usb-communication-adapter","title":"aRacer PRO-LINK USB Communication Adapter","description":"\u003cp\u003eThe \u003cstrong\u003ePRO-LINK\u003c\/strong\u003e is the cable you need to tune an aRacer ECU from a PC. It looks like a USB lead, but the connector housing contains the communication module that translates between SpeedTuningX on your computer and the ECU — a generic USB cable will not work.\u003c\/p\u003e\u003cp\u003ePhone tuning over Wi-Fi with the X-Tune app does not need it. You need the PRO-LINK for full map access, firmware and calibration files, diagnostics, and for sending logs to a remote tuner.\u003c\/p\u003e\u003ch3\u003eWhat it does\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eConnects supported aRacer ECUs to a Windows PC\u003c\/li\u003e\n\u003cli\u003eEnables SpeedTuningX setup, tuning, calibration and configuration\u003c\/li\u003e\n\u003cli\u003eFirmware, calibration and diagnostic communication where applicable\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eCompatibility\u003c\/h3\u003e\u003cp\u003eSupported aRacer ECU systems (RC Mini X \/ XX, RC Super X \/ XX and others). Confirm with your ECU model before ordering.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart number:\u003c\/strong\u003e PD-C0030\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e USB-to-ECU communication adapter\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eClosed-course competition use only.\u003c\/strong\u003e aRacer ECUs and race electronics are sold for closed-course competition, off-road, dyno and development use. They are not CARB-approved or EPA-certified for pollution-controlled vehicles on public roads. You are responsible for complying with the laws that apply to you.\u003c\/p\u003e\u003ch3\u003eDealer support\u003c\/h3\u003e\u003cp\u003eMala Racing is an authorized aRacer SpeedTek dealer. Orders ship from California, and U.S.-based technical support, calibration help and the aRacer calibration database are available through aRacer ECU R\u0026amp;D of America. Not sure about fitment or which accessories you need? Email \u003ca href=\"mailto:malaracingllc@gmail.com\"\u003emalaracingllc@gmail.com\u003c\/a\u003e with your bike, year and mods before you order.\u003c\/p\u003e\u003cp style=\"font-size:0.85em\"\u003e\u003cstrong\u003eCalifornia Proposition 65 WARNING:\u003c\/strong\u003e This product can expose you to chemicals including lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to \u003ca href=\"https:\/\/www.P65Warnings.ca.gov\" rel=\"nofollow\"\u003ewww.P65Warnings.ca.gov\u003c\/a\u003e.\u003c\/p\u003e","brand":"aRacer","offers":[{"title":"Default Title","offer_id":67825047339108,"sku":"PD-C0030","price":99.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0656\/3771\/1972\/files\/prolink.png?v=1792818866"},{"product_id":"aracer-race-panel-2","title":"aRacer Race Panel 2","description":"\u003cp\u003eThe \u003cstrong\u003eRace Panel 2\u003c\/strong\u003e is aRacer’s full racing dash: a 5-inch full-color touchscreen with ten RGB warning LEDs across the top, hardened full-lamination glass, an ambient light sensor and an IP67 rating. It shows engine and vehicle data, warnings and ECU functions for race, dyno and development use.\u003c\/p\u003e\u003cp\u003eIt is a Super-platform accessory: it works with \u003cstrong\u003eRC Super X and RC Super XX\u003c\/strong\u003e ECUs only. Mini X \/ Mini XX and older RC Super ECUs cannot drive it. The data and functions available depend on the ECU, software version, connected sensors and the vehicle.\u003c\/p\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e5-inch full-color 16.7M TFT touchscreen\u003c\/li\u003e\n\u003cli\u003e6H hardened full-lamination glass\u003c\/li\u003e\n\u003cli\u003e80° viewing angle\u003c\/li\u003e\n\u003cli\u003e10 RGB warning LEDs\u003c\/li\u003e\n\u003cli\u003eBuilt-in ambient light sensor\u003c\/li\u003e\n\u003cli\u003eIP67 waterproof\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eCompatibility\u003c\/h3\u003e\u003cp\u003eaRacer RC Super X and RC Super XX ECUs. Confirm ECU model, software support and connector configuration before ordering; larger installs may need the 1-to-10 extension cable set.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart number:\u003c\/strong\u003e PD-M0062 (factory reference Race Panel V2)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDisplay:\u003c\/strong\u003e 5-inch TFT touchscreen\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRating:\u003c\/strong\u003e IP67\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eClosed-course competition use only.\u003c\/strong\u003e aRacer ECUs and race electronics are sold for closed-course competition, off-road, dyno and development use. They are not CARB-approved or EPA-certified for pollution-controlled vehicles on public roads. You are responsible for complying with the laws that apply to you.\u003c\/p\u003e\u003ch3\u003eDealer support\u003c\/h3\u003e\u003cp\u003eMala Racing is an authorized aRacer SpeedTek dealer. Orders ship from California, and U.S.-based technical support, calibration help and the aRacer calibration database are available through aRacer ECU R\u0026amp;D of America. Not sure about fitment or which accessories you need? Email \u003ca href=\"mailto:malaracingllc@gmail.com\"\u003emalaracingllc@gmail.com\u003c\/a\u003e with your bike, year and mods before you order.\u003c\/p\u003e\u003cp style=\"font-size:0.85em\"\u003e\u003cstrong\u003eCalifornia Proposition 65 WARNING:\u003c\/strong\u003e This product can expose you to chemicals including lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to \u003ca href=\"https:\/\/www.P65Warnings.ca.gov\" rel=\"nofollow\"\u003ewww.P65Warnings.ca.gov\u003c\/a\u003e.\u003c\/p\u003e","brand":"aRacer","offers":[{"title":"Default Title","offer_id":67825051304036,"sku":"PD-M0062","price":799.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0656\/3771\/1972\/files\/racepanel2-2.png?v=1792818904"},{"product_id":"aracer-sport-d-racing-display","title":"aRacer Sport D Racing Display","description":"\u003cp\u003eThe \u003cstrong\u003eSport D\u003c\/strong\u003e is the compact digital display for aRacer ECUs — a clean handlebar or dash-mounted readout of the engine data your ECU supports, without the size or price of a full racing dash. It is the display to pair with a Mini X or Mini XX on a Grom, Z125 or scooter build.\u003c\/p\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDisplays supported ECU and engine data\u003c\/li\u003e\n\u003cli\u003eCompact racing layout, readable from the riding position\u003c\/li\u003e\n\u003cli\u003eSuits mini moto, scooter, motorcycle and ATV builds\u003c\/li\u003e\n\u003cli\u003eIntegrates with supported aRacer ECUs and accessories\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eIn the box\u003c\/h3\u003e\u003cp\u003eSport D display unit only. ECU, cables, bracket and other modules are sold separately; connect it through the ECU accessory port or a 1-to-5 extension cable.\u003c\/p\u003e\u003ch3\u003eCompatibility\u003c\/h3\u003e\u003cp\u003eSupported aRacer ECU systems. Displayed data varies by ECU model, sensor setup, wiring and software version — confirm before ordering.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart number:\u003c\/strong\u003e PD-M0038\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Compact digital ECU display\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eClosed-course competition use only.\u003c\/strong\u003e aRacer ECUs and race electronics are sold for closed-course competition, off-road, dyno and development use. They are not CARB-approved or EPA-certified for pollution-controlled vehicles on public roads. You are responsible for complying with the laws that apply to you.\u003c\/p\u003e\u003ch3\u003eDealer support\u003c\/h3\u003e\u003cp\u003eMala Racing is an authorized aRacer SpeedTek dealer. Orders ship from California, and U.S.-based technical support, calibration help and the aRacer calibration database are available through aRacer ECU R\u0026amp;D of America. Not sure about fitment or which accessories you need? Email \u003ca href=\"mailto:malaracingllc@gmail.com\"\u003emalaracingllc@gmail.com\u003c\/a\u003e with your bike, year and mods before you order.\u003c\/p\u003e\u003cp style=\"font-size:0.85em\"\u003e\u003cstrong\u003eCalifornia Proposition 65 WARNING:\u003c\/strong\u003e This product can expose you to chemicals including lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to \u003ca href=\"https:\/\/www.P65Warnings.ca.gov\" rel=\"nofollow\"\u003ewww.P65Warnings.ca.gov\u003c\/a\u003e.\u003c\/p\u003e","brand":"aRacer","offers":[{"title":"Default Title","offer_id":67825052221540,"sku":"PD-M0038","price":159.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0656\/3771\/1972\/files\/sportd-3.png?v=1792818907"},{"product_id":"aracer-dg2-multi-function-display-gauge","title":"aRacer DG2 Multi-Function Display Gauge","description":"\u003cp\u003eThe \u003cstrong\u003eDG2\u003c\/strong\u003e is a compact OLED gauge that puts live tuning data on the bike: real-time air-fuel ratio when paired with an AF2 \/ AF3 wideband module, plus voltage and timing where the ECU supports it. Multi-color LED alerts with adjustable thresholds warn you before something expensive happens.\u003c\/p\u003e\u003cp\u003eIt mounts on the bars or dash and comes with its harness, aluminum face bezel and backing plate. Choose black, red or gold trim; the optional \u003ca href=\"\/products\/aracer-dg2-bracket\"\u003eDG2 Bracket\u003c\/a\u003e mounts it in a mirror hole, and the \u003ca href=\"\/products\/aracer-dg2-cnc-shell-top\"\u003eCNC shell top\u003c\/a\u003e is a replacement trim ring.\u003c\/p\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eReal-time AFR with a compatible wideband module\u003c\/li\u003e\n\u003cli\u003eVoltage and timing information where supported\u003c\/li\u003e\n\u003cli\u003eOLED display, readable in varying light\u003c\/li\u003e\n\u003cli\u003eMulti-color LED alerts with adjustable warning thresholds\u003c\/li\u003e\n\u003cli\u003eStraightforward install with supported aRacer systems\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eIn the box\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDG2 display gauge\u003c\/li\u003e\n\u003cli\u003eDG2 wire harness\u003c\/li\u003e\n\u003cli\u003eAluminum face bezel\u003c\/li\u003e\n\u003cli\u003eBacking plate\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eCompatibility\u003c\/h3\u003e\u003cp\u003eSupported aRacer ECU systems and aRacer wideband AFR modules. Functions depend on ECU model, wiring, sensors and accessories.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart numbers:\u003c\/strong\u003e PD-G0041 (Black), PD-G0042 (Red), PD-G0043 (Gold)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDisplay:\u003c\/strong\u003e OLED\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eClosed-course competition use only.\u003c\/strong\u003e aRacer ECUs and race electronics are sold for closed-course competition, off-road, dyno and development use. They are not CARB-approved or EPA-certified for pollution-controlled vehicles on public roads. You are responsible for complying with the laws that apply to you.\u003c\/p\u003e\u003ch3\u003eDealer support\u003c\/h3\u003e\u003cp\u003eMala Racing is an authorized aRacer SpeedTek dealer. Orders ship from California, and U.S.-based technical support, calibration help and the aRacer calibration database are available through aRacer ECU R\u0026amp;D of America. Not sure about fitment or which accessories you need? Email \u003ca href=\"mailto:malaracingllc@gmail.com\"\u003emalaracingllc@gmail.com\u003c\/a\u003e with your bike, year and mods before you order.\u003c\/p\u003e\u003cp style=\"font-size:0.85em\"\u003e\u003cstrong\u003eCalifornia Proposition 65 WARNING:\u003c\/strong\u003e This product can expose you to chemicals including lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to \u003ca href=\"https:\/\/www.P65Warnings.ca.gov\" rel=\"nofollow\"\u003ewww.P65Warnings.ca.gov\u003c\/a\u003e.\u003c\/p\u003e","brand":"aRacer","offers":[{"title":"Black","offer_id":67825052581988,"sku":"PD-G0041","price":259.0,"currency_code":"USD","in_stock":true},{"title":"Red","offer_id":67825052614756,"sku":"PD-G0042","price":259.0,"currency_code":"USD","in_stock":true},{"title":"Gold","offer_id":67825052647524,"sku":"PD-G0043","price":259.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0656\/3771\/1972\/files\/dg2.png?v=1792818910"},{"product_id":"aracer-dg2-bracket","title":"aRacer DG2 Bracket","description":"\u003cp\u003eMounting bracket for the \u003ca href=\"\/products\/aracer-dg2-multi-function-display-gauge\"\u003eaRacer DG2 gauge\u003c\/a\u003e: puts the gauge in the mirror-mount location on the handlebar clamp, where it sits in your eyeline without taking up bar space.\u003c\/p\u003e\u003ch3\u003eCompatibility\u003c\/h3\u003e\u003cp\u003eaRacer DG2 Multi-Function Display Gauge; mounts in a standard mirror hole.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e\n\u003cstrong\u003ePart number:\u003c\/strong\u003e PD-G0051\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eClosed-course competition use only.\u003c\/strong\u003e aRacer ECUs and race electronics are sold for closed-course competition, off-road, dyno and development use. They are not CARB-approved or EPA-certified for pollution-controlled vehicles on public roads. You are responsible for complying with the laws that apply to you.\u003c\/p\u003e\u003ch3\u003eDealer support\u003c\/h3\u003e\u003cp\u003eMala Racing is an authorized aRacer SpeedTek dealer. Orders ship from California, and U.S.-based technical support, calibration help and the aRacer calibration database are available through aRacer ECU R\u0026amp;D of America. Not sure about fitment or which accessories you need? Email \u003ca href=\"mailto:malaracingllc@gmail.com\"\u003emalaracingllc@gmail.com\u003c\/a\u003e with your bike, year and mods before you order.\u003c\/p\u003e\u003cp style=\"font-size:0.85em\"\u003e\u003cstrong\u003eCalifornia Proposition 65 WARNING:\u003c\/strong\u003e This product can expose you to chemicals including lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to \u003ca href=\"https:\/\/www.P65Warnings.ca.gov\" rel=\"nofollow\"\u003ewww.P65Warnings.ca.gov\u003c\/a\u003e.\u003c\/p\u003e","brand":"aRacer","offers":[{"title":"Default Title","offer_id":67825058087012,"sku":"PD-G0051","price":22.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0656\/3771\/1972\/files\/dg2b-3.png?v=1792818950"},{"product_id":"aracer-r-button","title":"aRacer R Button","description":"\u003cp\u003eThe \u003cstrong\u003eR Button\u003c\/strong\u003e is a compact handlebar button with a built-in indicator LED that gives the rider control of aRacer ECU functions on the move: switch between stored maps, activate start mode, and get shift-light, over-temperature and traction-control indication where the ECU supports it.\u003c\/p\u003e\u003cp\u003eIt works across the whole current range — \u003cstrong\u003eMini X, Mini XX, Super X and Super XX\u003c\/strong\u003e — which makes it the cheapest way to add map switching to a Grom or Z125 race bike (one map for the dry, one for a wet or restricted class).\u003c\/p\u003e\u003ch3\u003eFunctions\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eMAP switching with multiple stored maps\u003c\/li\u003e\n\u003cli\u003eStart mode activation where compatible\u003c\/li\u003e\n\u003cli\u003eShift indicator light\u003c\/li\u003e\n\u003cli\u003eOver-temperature warning\u003c\/li\u003e\n\u003cli\u003eTCS action indication where supported\u003c\/li\u003e\n\u003cli\u003eOther ECU-controlled functions depending on setup\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eCompatibility\u003c\/h3\u003e\u003cp\u003eaRacer RC Super X, RC Super XX, RC Mini X and RC Mini XX. Available functions depend on ECU model, software, wiring and enabled features.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart number:\u003c\/strong\u003e PD-S0007\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Multi-function ECU control button with indicator LED\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eClosed-course competition use only.\u003c\/strong\u003e aRacer ECUs and race electronics are sold for closed-course competition, off-road, dyno and development use. They are not CARB-approved or EPA-certified for pollution-controlled vehicles on public roads. You are responsible for complying with the laws that apply to you.\u003c\/p\u003e\u003ch3\u003eDealer support\u003c\/h3\u003e\u003cp\u003eMala Racing is an authorized aRacer SpeedTek dealer. Orders ship from California, and U.S.-based technical support, calibration help and the aRacer calibration database are available through aRacer ECU R\u0026amp;D of America. Not sure about fitment or which accessories you need? Email \u003ca href=\"mailto:malaracingllc@gmail.com\"\u003emalaracingllc@gmail.com\u003c\/a\u003e with your bike, year and mods before you order.\u003c\/p\u003e\u003cp style=\"font-size:0.85em\"\u003e\u003cstrong\u003eCalifornia Proposition 65 WARNING:\u003c\/strong\u003e This product can expose you to chemicals including lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to \u003ca href=\"https:\/\/www.P65Warnings.ca.gov\" rel=\"nofollow\"\u003ewww.P65Warnings.ca.gov\u003c\/a\u003e.\u003c\/p\u003e","brand":"aRacer","offers":[{"title":"Default Title","offer_id":67825058119780,"sku":"PD-S0007","price":99.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0656\/3771\/1972\/files\/rbutton.png?v=1792818950"},{"product_id":"aracer-dg2-cnc-shell-top","title":"aRacer DG2 CNC Shell Top","description":"\u003cp\u003eReplacement CNC-machined aluminum shell top (trim ring) for the \u003ca href=\"\/products\/aracer-dg2-multi-function-display-gauge\"\u003eaRacer DG2 gauge\u003c\/a\u003e. Swap the color of your DG2 or replace a scuffed one. Available in black, red or gold.\u003c\/p\u003e\u003ch3\u003eCompatibility\u003c\/h3\u003e\u003cp\u003eaRacer DG2 Multi-Function Display Gauge only.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart numbers:\u003c\/strong\u003e PD-G0046 (Black), PD-G0047 (Red), PD-G0048 (Gold)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e CNC aluminum\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eClosed-course competition use only.\u003c\/strong\u003e aRacer ECUs and race electronics are sold for closed-course competition, off-road, dyno and development use. They are not CARB-approved or EPA-certified for pollution-controlled vehicles on public roads. You are responsible for complying with the laws that apply to you.\u003c\/p\u003e\u003ch3\u003eDealer support\u003c\/h3\u003e\u003cp\u003eMala Racing is an authorized aRacer SpeedTek dealer. Orders ship from California, and U.S.-based technical support, calibration help and the aRacer calibration database are available through aRacer ECU R\u0026amp;D of America. Not sure about fitment or which accessories you need? Email \u003ca href=\"mailto:malaracingllc@gmail.com\"\u003emalaracingllc@gmail.com\u003c\/a\u003e with your bike, year and mods before you order.\u003c\/p\u003e\u003cp style=\"font-size:0.85em\"\u003e\u003cstrong\u003eCalifornia Proposition 65 WARNING:\u003c\/strong\u003e This product can expose you to chemicals including lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to \u003ca href=\"https:\/\/www.P65Warnings.ca.gov\" rel=\"nofollow\"\u003ewww.P65Warnings.ca.gov\u003c\/a\u003e.\u003c\/p\u003e","brand":"aRacer","offers":[{"title":"Black","offer_id":67825058480228,"sku":"PD-G0046","price":89.0,"currency_code":"USD","in_stock":true},{"title":"Red","offer_id":67825058512996,"sku":"PD-G0047","price":89.0,"currency_code":"USD","in_stock":true},{"title":"Gold","offer_id":67825058545764,"sku":"PD-G0048","price":89.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0656\/3771\/1972\/files\/shell_60962207-f9c8-47d5-835e-cd8b7d8c707a.png?v=1792818952"},{"product_id":"aracer-vss-vehicle-speed-sensor-set","title":"aRacer VSS Vehicle Speed Sensor 2-Piece Set","description":"\u003cp\u003eTwo-piece vehicle speed sensor set for aRacer Race Module setups. Race Module functions that depend on wheel speed — pit limiter, launch control, speed-based data — need a clean speed signal; this set provides it on bikes where the stock speed input is unavailable or unsuitable, and works as a replacement or second sensor.\u003c\/p\u003e\u003ch3\u003eIn the box\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e2× VSS sensors\u003c\/li\u003e\n\u003cli\u003e2× 1-to-1 extension cables\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eRace Module, ECU and additional wiring are not included.\u003c\/p\u003e\u003ch3\u003eCompatibility\u003c\/h3\u003e\u003cp\u003eSupported aRacer Race Module \/ ECU configurations (RC Super X and RC Super XX). Depends on Race Module version, ECU model, wiring and vehicle.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart number:\u003c\/strong\u003e PD-M0067\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Vehicle speed sensor set\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eClosed-course competition use only.\u003c\/strong\u003e aRacer ECUs and race electronics are sold for closed-course competition, off-road, dyno and development use. They are not CARB-approved or EPA-certified for pollution-controlled vehicles on public roads. You are responsible for complying with the laws that apply to you.\u003c\/p\u003e\u003ch3\u003eDealer support\u003c\/h3\u003e\u003cp\u003eMala Racing is an authorized aRacer SpeedTek dealer. Orders ship from California, and U.S.-based technical support, calibration help and the aRacer calibration database are available through aRacer ECU R\u0026amp;D of America. Not sure about fitment or which accessories you need? Email \u003ca href=\"mailto:malaracingllc@gmail.com\"\u003emalaracingllc@gmail.com\u003c\/a\u003e with your bike, year and mods before you order.\u003c\/p\u003e\u003cp style=\"font-size:0.85em\"\u003e\u003cstrong\u003eCalifornia Proposition 65 WARNING:\u003c\/strong\u003e This product can expose you to chemicals including lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to \u003ca href=\"https:\/\/www.P65Warnings.ca.gov\" rel=\"nofollow\"\u003ewww.P65Warnings.ca.gov\u003c\/a\u003e.\u003c\/p\u003e","brand":"aRacer","offers":[{"title":"Default Title","offer_id":67825062707300,"sku":"PD-M0067","price":89.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0656\/3771\/1972\/files\/vss-3.png?v=1792818981"},{"product_id":"aracer-hi-power-max-spark-coil","title":"aRacer Hi Power MAX Spark Coil","description":"\u003cp\u003eHigh-output ignition coil for single-cylinder EFI four-strokes. A stronger spark helps a modified engine light off cleanly at high RPM and under boost from a big-bore or high-compression build, and can sharpen throttle response when the ignition map is tuned to suit. Universal fit on many small-displacement EFI singles.\u003c\/p\u003e\u003ch3\u003eCommon applications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eHonda Grom 125 and Monkey 125\u003c\/li\u003e\n\u003cli\u003eKawasaki Z125 Pro\u003c\/li\u003e\n\u003cli\u003eHonda CBR250R \/ CBR300R and Rebel 300\u003c\/li\u003e\n\u003cli\u003eYamaha Zuma 125\u003c\/li\u003e\n\u003cli\u003eHonda Metropolitan 2012+\u003c\/li\u003e\n\u003cli\u003eOther single-cylinder EFI engines with a matching coil type\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment notes\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eEFI ignition only — not for CDI systems (carbureted VMC \/ pit bikes)\u003c\/li\u003e\n\u003cli\u003eSpark plug cap not included\u003c\/li\u003e\n\u003cli\u003eMounting location varies by bike; brackets may be needed\u003c\/li\u003e\n\u003cli\u003eRetune after fitting on a modified engine\u003c\/li\u003e\n\u003cli\u003eHigh spark output — keep hands clear with the ignition on\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart number:\u003c\/strong\u003e PD-P0028\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e High-output ignition coil, EFI single-cylinder\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eClosed-course competition use only.\u003c\/strong\u003e aRacer ECUs and race electronics are sold for closed-course competition, off-road, dyno and development use. They are not CARB-approved or EPA-certified for pollution-controlled vehicles on public roads. You are responsible for complying with the laws that apply to you.\u003c\/p\u003e\u003ch3\u003eDealer support\u003c\/h3\u003e\u003cp\u003eMala Racing is an authorized aRacer SpeedTek dealer. Orders ship from California, and U.S.-based technical support, calibration help and the aRacer calibration database are available through aRacer ECU R\u0026amp;D of America. Not sure about fitment or which accessories you need? Email \u003ca href=\"mailto:malaracingllc@gmail.com\"\u003emalaracingllc@gmail.com\u003c\/a\u003e with your bike, year and mods before you order.\u003c\/p\u003e\u003cp style=\"font-size:0.85em\"\u003e\u003cstrong\u003eCalifornia Proposition 65 WARNING:\u003c\/strong\u003e This product can expose you to chemicals including lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to \u003ca href=\"https:\/\/www.P65Warnings.ca.gov\" rel=\"nofollow\"\u003ewww.P65Warnings.ca.gov\u003c\/a\u003e.\u003c\/p\u003e","brand":"aRacer","offers":[{"title":"Default Title","offer_id":67825063034980,"sku":"PD-P0028","price":169.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0656\/3771\/1972\/files\/powersparkmax.png?v=1792818981"},{"product_id":"aracer-3-button-race-switch","title":"aRacer 3-Button Race Switch","description":"\u003cp\u003eHandlebar-mounted three-button switch for aRacer Race Module functions on \u003cstrong\u003eSuper X \/ Super XX\u003c\/strong\u003e ECUs: launch control, pit limiter, map or mode switching and custom inputs, depending on how the ECU is configured. Clamp-style mount and a plug-in harness, so it is a clean install on a race bike.\u003c\/p\u003e\u003ch3\u003eIn the box\u003c\/h3\u003e\u003cp\u003e3-button switch assembly and harness. ECU and Race Module functions are not included; functions are configured in the ECU software.\u003c\/p\u003e\u003ch3\u003eCompatibility\u003c\/h3\u003e\u003cp\u003eSupported aRacer Race Module \/ ECU configurations (RC Super X and RC Super XX). Button functions vary by ECU model, Race Module version, wiring and software.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart number:\u003c\/strong\u003e PD-M0021\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Handlebar race control switch, clamp mount\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eClosed-course competition use only.\u003c\/strong\u003e aRacer ECUs and race electronics are sold for closed-course competition, off-road, dyno and development use. They are not CARB-approved or EPA-certified for pollution-controlled vehicles on public roads. You are responsible for complying with the laws that apply to you.\u003c\/p\u003e\u003ch3\u003eDealer support\u003c\/h3\u003e\u003cp\u003eMala Racing is an authorized aRacer SpeedTek dealer. Orders ship from California, and U.S.-based technical support, calibration help and the aRacer calibration database are available through aRacer ECU R\u0026amp;D of America. Not sure about fitment or which accessories you need? Email \u003ca href=\"mailto:malaracingllc@gmail.com\"\u003emalaracingllc@gmail.com\u003c\/a\u003e with your bike, year and mods before you order.\u003c\/p\u003e\u003cp style=\"font-size:0.85em\"\u003e\u003cstrong\u003eCalifornia Proposition 65 WARNING:\u003c\/strong\u003e This product can expose you to chemicals including lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to \u003ca href=\"https:\/\/www.P65Warnings.ca.gov\" rel=\"nofollow\"\u003ewww.P65Warnings.ca.gov\u003c\/a\u003e.\u003c\/p\u003e","brand":"aRacer","offers":[{"title":"Default Title","offer_id":67825063362660,"sku":"PD-M0021","price":109.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0656\/3771\/1972\/files\/3buttonracesw-3.png?v=1792818984"},{"product_id":"aracer-qss-v2-standalone-quick-shifter","title":"aRacer QSS V2 Standalone Quick Shifter (Single Cylinder)","description":"\u003cp\u003eThe \u003cstrong\u003eQSS V2\u003c\/strong\u003e (QS Sport V2) is a standalone quick shifter for single-cylinder bikes: clutchless, full-throttle upshifts \u003cstrong\u003ewithout replacing the ECU\u003c\/strong\u003e. It cuts the ignition for the shift on its own, so it suits a Grom, Z125, CRF or similar single running the stock ECU, or a bike where you only want a quick-shift upgrade.\u003c\/p\u003e\u003cp\u003eRunning an aRacer Super X \/ Super XX ECU? The \u003ca href=\"\/products\/aracer-qsr-v2-quick-shift-race-v2\"\u003eQSR V2\u003c\/a\u003e integrates with the ECU and is the better kit.\u003c\/p\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eStandalone quick shifter for one-cylinder applications\u003c\/li\u003e\n\u003cli\u003eClutchless upshifts once installed and configured\u003c\/li\u003e\n\u003cli\u003eFaster, more consistent shifts for race and track use\u003c\/li\u003e\n\u003cli\u003eSuits motorcycle, mini-moto and scooter builds where supported\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cp\u003eNeeds wiring into the ignition, a shift sensor on the linkage, and cut-time configuration. Professional installation recommended for race use. Confirm compatibility with your bike, ignition system and shift linkage before ordering.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart number:\u003c\/strong\u003e PA-QH015\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Standalone quick shifter, single cylinder\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eClosed-course competition use only.\u003c\/strong\u003e aRacer ECUs and race electronics are sold for closed-course competition, off-road, dyno and development use. They are not CARB-approved or EPA-certified for pollution-controlled vehicles on public roads. You are responsible for complying with the laws that apply to you.\u003c\/p\u003e\u003ch3\u003eDealer support\u003c\/h3\u003e\u003cp\u003eMala Racing is an authorized aRacer SpeedTek dealer. Orders ship from California, and U.S.-based technical support, calibration help and the aRacer calibration database are available through aRacer ECU R\u0026amp;D of America. Not sure about fitment or which accessories you need? Email \u003ca href=\"mailto:malaracingllc@gmail.com\"\u003emalaracingllc@gmail.com\u003c\/a\u003e with your bike, year and mods before you order.\u003c\/p\u003e\u003cp style=\"font-size:0.85em\"\u003e\u003cstrong\u003eCalifornia Proposition 65 WARNING:\u003c\/strong\u003e This product can expose you to chemicals including lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to \u003ca href=\"https:\/\/www.P65Warnings.ca.gov\" rel=\"nofollow\"\u003ewww.P65Warnings.ca.gov\u003c\/a\u003e.\u003c\/p\u003e","brand":"aRacer","offers":[{"title":"Default Title","offer_id":67825068310628,"sku":"PA-QH015","price":299.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0656\/3771\/1972\/files\/qs_sport-3.png?v=1792819024"},{"product_id":"aracer-qss-red-v1-standalone-quick-shifter","title":"aRacer QSS Red V1 Standalone Quick Shifter (Pull Type)","description":"\u003cp\u003eThe \u003cstrong\u003eQSS Red V1\u003c\/strong\u003e is the previous-generation standalone quick shifter — clutchless, full-throttle upshifts without replacing the ECU, with a \u003cstrong\u003epull-type\u003c\/strong\u003e shift sensor for linkages that pull on the upshift. It works with supported EFI ignition-coil systems and is sold here as a value option while stock lasts; the QSS V2 is the current unit.\u003c\/p\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eStandalone quick shifter — no ECU replacement\u003c\/li\u003e\n\u003cli\u003ePull-type shift sensor\u003c\/li\u003e\n\u003cli\u003eClutchless upshifts once installed and configured\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cp\u003eNeeds wiring into the ignition, a shift sensor on the linkage, and cut-time configuration. Confirm your linkage direction (pull on upshift) and ignition type before ordering. Professional installation recommended.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart number:\u003c\/strong\u003e US-LEG-QSv1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Standalone quick shifter, pull type\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eClosed-course competition use only.\u003c\/strong\u003e aRacer ECUs and race electronics are sold for closed-course competition, off-road, dyno and development use. They are not CARB-approved or EPA-certified for pollution-controlled vehicles on public roads. You are responsible for complying with the laws that apply to you.\u003c\/p\u003e\u003ch3\u003eDealer support\u003c\/h3\u003e\u003cp\u003eMala Racing is an authorized aRacer SpeedTek dealer. Orders ship from California, and U.S.-based technical support, calibration help and the aRacer calibration database are available through aRacer ECU R\u0026amp;D of America. Not sure about fitment or which accessories you need? Email \u003ca href=\"mailto:malaracingllc@gmail.com\"\u003emalaracingllc@gmail.com\u003c\/a\u003e with your bike, year and mods before you order.\u003c\/p\u003e\u003cp style=\"font-size:0.85em\"\u003e\u003cstrong\u003eCalifornia Proposition 65 WARNING:\u003c\/strong\u003e This product can expose you to chemicals including lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to \u003ca href=\"https:\/\/www.P65Warnings.ca.gov\" rel=\"nofollow\"\u003ewww.P65Warnings.ca.gov\u003c\/a\u003e.\u003c\/p\u003e","brand":"aRacer","offers":[{"title":"Default Title","offer_id":67825068671076,"sku":"US-LEG-QSv1","price":249.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0656\/3771\/1972\/files\/qs_sport_red-5.png?v=1792819027"},{"product_id":"aracer-qsr-v2-quick-shift-race-v2","title":"aRacer QSR V2 Quick Shift Race V2","description":"\u003cp\u003eThe \u003cstrong\u003eQSR V2\u003c\/strong\u003e is aRacer’s race quick shifter kit for \u003cstrong\u003eSuper X \/ Super XX\u003c\/strong\u003e ECUs. A piezoelectric shift sensor sampled up to 1,000 times a second feeds the ECU directly, so the ignition cut is timed by the ECU rather than a dumb switch: clutchless upshifts that are faster, more consistent and closed-loop corrected. On ride-by-wire bikes it can also handle downshift blipping. Developed and proven in Asia Road Racing Championship competition.\u003c\/p\u003e\u003cp\u003eThis is an ECU expansion kit, not a standalone shifter — it only works with a supported aRacer Super X \/ Super XX ECU. For a standalone unit on a bike with the stock ECU, see the QSS V2.\u003c\/p\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eClutchless upshifts controlled by the ECU\u003c\/li\u003e\n\u003cli\u003eDownshift control on compatible ride-by-wire applications\u003c\/li\u003e\n\u003cli\u003ePiezoelectric sensor, up to 1,000 Hz sampling\u003c\/li\u003e\n\u003cli\u003eClosed-loop shift control for timing and smoothness\u003c\/li\u003e\n\u003cli\u003eStandard or reverse (GP) shift pattern where compatible\u003c\/li\u003e\n\u003cli\u003eCompact, lightweight, with self-diagnosis\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eCompatibility\u003c\/h3\u003e\u003cp\u003eaRacer RC Super X and RC Super XX ECUs only. Not for Mini X \/ Mini XX or older ECUs. Requires correct sensor installation and ECU calibration.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart number:\u003c\/strong\u003e PD-M0056\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSensor:\u003c\/strong\u003e Piezoelectric\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSampling:\u003c\/strong\u003e Up to 1,000 times per second\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eClosed-course competition use only.\u003c\/strong\u003e aRacer ECUs and race electronics are sold for closed-course competition, off-road, dyno and development use. They are not CARB-approved or EPA-certified for pollution-controlled vehicles on public roads. You are responsible for complying with the laws that apply to you.\u003c\/p\u003e\u003ch3\u003eDealer support\u003c\/h3\u003e\u003cp\u003eMala Racing is an authorized aRacer SpeedTek dealer. Orders ship from California, and U.S.-based technical support, calibration help and the aRacer calibration database are available through aRacer ECU R\u0026amp;D of America. Not sure about fitment or which accessories you need? Email \u003ca href=\"mailto:malaracingllc@gmail.com\"\u003emalaracingllc@gmail.com\u003c\/a\u003e with your bike, year and mods before you order.\u003c\/p\u003e\u003cp style=\"font-size:0.85em\"\u003e\u003cstrong\u003eCalifornia Proposition 65 WARNING:\u003c\/strong\u003e This product can expose you to chemicals including lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to \u003ca href=\"https:\/\/www.P65Warnings.ca.gov\" rel=\"nofollow\"\u003ewww.P65Warnings.ca.gov\u003c\/a\u003e.\u003c\/p\u003e","brand":"aRacer","offers":[{"title":"Default Title","offer_id":67825069293668,"sku":"PD-M0056","price":399.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0656\/3771\/1972\/files\/qsrv2-5.png?v=1792819031"},{"product_id":"aracer-1-to-2-cable-splitter-harness","title":"aRacer 1-to-2 Cable Splitter Harness","description":"\u003cp\u003eSplits one aRacer ECU accessory port into two, so you can run two accessories — for example an AF3 wideband module and a DG2 gauge, or an R Button and a Sport D — from a single port. The simplest way to add a second accessory to a Mini X \/ Mini XX install.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart number:\u003c\/strong\u003e PD-C0024\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnection:\u003c\/strong\u003e 1 ECU-side to 2 accessory-side\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eCompatibility\u003c\/h3\u003e\u003cp\u003eaRacer ECU systems and accessories using the matching accessory-port connector. Confirm connector type and that both accessories are supported on one port before ordering.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eClosed-course competition use only.\u003c\/strong\u003e aRacer ECUs and race electronics are sold for closed-course competition, off-road, dyno and development use. They are not CARB-approved or EPA-certified for pollution-controlled vehicles on public roads. You are responsible for complying with the laws that apply to you.\u003c\/p\u003e\u003ch3\u003eDealer support\u003c\/h3\u003e\u003cp\u003eMala Racing is an authorized aRacer SpeedTek dealer. Orders ship from California, and U.S.-based technical support, calibration help and the aRacer calibration database are available through aRacer ECU R\u0026amp;D of America. Not sure about fitment or which accessories you need? Email \u003ca href=\"mailto:malaracingllc@gmail.com\"\u003emalaracingllc@gmail.com\u003c\/a\u003e with your bike, year and mods before you order.\u003c\/p\u003e\u003cp style=\"font-size:0.85em\"\u003e\u003cstrong\u003eCalifornia Proposition 65 WARNING:\u003c\/strong\u003e This product can expose you to chemicals including lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to \u003ca href=\"https:\/\/www.P65Warnings.ca.gov\" rel=\"nofollow\"\u003ewww.P65Warnings.ca.gov\u003c\/a\u003e.\u003c\/p\u003e","brand":"aRacer","offers":[{"title":"Default Title","offer_id":67825073553508,"sku":"PD-C0024","price":29.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0656\/3771\/1972\/files\/1-2cable-3_bc8269ac-a014-49a0-a1b3-9097d4ccac30.png?v=1792819058"},{"product_id":"aracer-1-to-5-extension-cable","title":"aRacer 1-to-5 Extension Cable","description":"\u003cp\u003eAccessory expansion harness with two ECU-side connectors and five accessory-side connections. It is the tidy way to wire up a display plus a wideband plus a comms module on one bike instead of daisy-chaining splitters.\u003c\/p\u003e\u003ch3\u003eAccessory connections\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eAF1 wideband (×2)\u003c\/li\u003e\n\u003cli\u003eiMode \/ Sport D display\u003c\/li\u003e\n\u003cli\u003eiLink \/ bLink communication module\u003c\/li\u003e\n\u003cli\u003eRace Cam \/ Knock Module\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart number:\u003c\/strong\u003e PD-C0028\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnections:\u003c\/strong\u003e 2 ECU-side, 5 accessory-side\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eCompatibility\u003c\/h3\u003e\u003cp\u003eSupported aRacer ECU systems and accessories. Confirm ECU model, connector style and accessory type before ordering; accessory support depends on the ECU platform.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eClosed-course competition use only.\u003c\/strong\u003e aRacer ECUs and race electronics are sold for closed-course competition, off-road, dyno and development use. They are not CARB-approved or EPA-certified for pollution-controlled vehicles on public roads. You are responsible for complying with the laws that apply to you.\u003c\/p\u003e\u003ch3\u003eDealer support\u003c\/h3\u003e\u003cp\u003eMala Racing is an authorized aRacer SpeedTek dealer. Orders ship from California, and U.S.-based technical support, calibration help and the aRacer calibration database are available through aRacer ECU R\u0026amp;D of America. Not sure about fitment or which accessories you need? Email \u003ca href=\"mailto:malaracingllc@gmail.com\"\u003emalaracingllc@gmail.com\u003c\/a\u003e with your bike, year and mods before you order.\u003c\/p\u003e\u003cp style=\"font-size:0.85em\"\u003e\u003cstrong\u003eCalifornia Proposition 65 WARNING:\u003c\/strong\u003e This product can expose you to chemicals including lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to \u003ca href=\"https:\/\/www.P65Warnings.ca.gov\" rel=\"nofollow\"\u003ewww.P65Warnings.ca.gov\u003c\/a\u003e.\u003c\/p\u003e","brand":"aRacer","offers":[{"title":"Default Title","offer_id":67825073881188,"sku":"PD-C0028","price":49.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0656\/3771\/1972\/files\/25cable.png?v=1792819059"},{"product_id":"aracer-1-to-1-extension-cable","title":"aRacer 1-to-1 Extension Cable","description":"\u003cp\u003eDirect 1-to-1 extension for an aRacer ECU accessory port, about 45 in \/ 115 cm long. Use it when the DG2, Sport D, AF3 or another accessory needs to sit further from the ECU than its own lead allows. It extends one connection; it does not split it — for more ports use the 1-to-2, 1-to-5 or 1-to-10 harness.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart number:\u003c\/strong\u003e PD-C0003\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength:\u003c\/strong\u003e approx. 45 in \/ 115 cm (±2 in)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnection:\u003c\/strong\u003e 1-to-1, aRacer accessory port\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eCompatibility\u003c\/h3\u003e\u003cp\u003eaRacer ECU systems and accessories using the matching accessory-port connector. Confirm connector type before ordering.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eClosed-course competition use only.\u003c\/strong\u003e aRacer ECUs and race electronics are sold for closed-course competition, off-road, dyno and development use. They are not CARB-approved or EPA-certified for pollution-controlled vehicles on public roads. You are responsible for complying with the laws that apply to you.\u003c\/p\u003e\u003ch3\u003eDealer support\u003c\/h3\u003e\u003cp\u003eMala Racing is an authorized aRacer SpeedTek dealer. Orders ship from California, and U.S.-based technical support, calibration help and the aRacer calibration database are available through aRacer ECU R\u0026amp;D of America. Not sure about fitment or which accessories you need? Email \u003ca href=\"mailto:malaracingllc@gmail.com\"\u003emalaracingllc@gmail.com\u003c\/a\u003e with your bike, year and mods before you order.\u003c\/p\u003e\u003cp style=\"font-size:0.85em\"\u003e\u003cstrong\u003eCalifornia Proposition 65 WARNING:\u003c\/strong\u003e This product can expose you to chemicals including lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to \u003ca href=\"https:\/\/www.P65Warnings.ca.gov\" rel=\"nofollow\"\u003ewww.P65Warnings.ca.gov\u003c\/a\u003e.\u003c\/p\u003e","brand":"aRacer","offers":[{"title":"Default Title","offer_id":67825074503780,"sku":"PD-C0003","price":19.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0656\/3771\/1972\/files\/11cable.png?v=1792819065"},{"product_id":"aracer-1-to-10-extension-cable-set-v2","title":"aRacer 1-to-10 Extension Cable Set V2","description":"\u003cp\u003eThe full accessory expansion harness for a Super X \/ Super XX race install: ten accessory-side connections for displays, wideband, Race Module, logger, gyro, knock module and camera, so a dyno or race bike running the whole aRacer system can be wired once and wired neatly.\u003c\/p\u003e\u003ch3\u003eAccessory connections\u003c\/h3\u003e\u003col\u003e\n\u003cli\u003eiLink\u003c\/li\u003e\n\u003cli\u003eRace Panel\u003c\/li\u003e\n\u003cli\u003eAF1\u003c\/li\u003e\n\u003cli\u003eRace Module\u003c\/li\u003e\n\u003cli\u003eLogger\u003c\/li\u003e\n\u003cli\u003eGyro\u003c\/li\u003e\n\u003cli\u003eKnock Module\u003c\/li\u003e\n\u003cli\u003eRace Cam\u003c\/li\u003e\n\u003cli\u003eAF1\u003c\/li\u003e\n\u003cli\u003eX2\u003c\/li\u003e\n\u003c\/ol\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart number:\u003c\/strong\u003e PD-C0022\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnections:\u003c\/strong\u003e 10 accessory-side\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eCompatibility\u003c\/h3\u003e\u003cp\u003eSupported aRacer ECU systems and accessories. Confirm ECU model, connector style and accessory support before ordering.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eClosed-course competition use only.\u003c\/strong\u003e aRacer ECUs and race electronics are sold for closed-course competition, off-road, dyno and development use. They are not CARB-approved or EPA-certified for pollution-controlled vehicles on public roads. You are responsible for complying with the laws that apply to you.\u003c\/p\u003e\u003ch3\u003eDealer support\u003c\/h3\u003e\u003cp\u003eMala Racing is an authorized aRacer SpeedTek dealer. Orders ship from California, and U.S.-based technical support, calibration help and the aRacer calibration database are available through aRacer ECU R\u0026amp;D of America. Not sure about fitment or which accessories you need? Email \u003ca href=\"mailto:malaracingllc@gmail.com\"\u003emalaracingllc@gmail.com\u003c\/a\u003e with your bike, year and mods before you order.\u003c\/p\u003e\u003cp style=\"font-size:0.85em\"\u003e\u003cstrong\u003eCalifornia Proposition 65 WARNING:\u003c\/strong\u003e This product can expose you to chemicals including lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to \u003ca href=\"https:\/\/www.P65Warnings.ca.gov\" rel=\"nofollow\"\u003ewww.P65Warnings.ca.gov\u003c\/a\u003e.\u003c\/p\u003e","brand":"aRacer","offers":[{"title":"Default Title","offer_id":67825078435940,"sku":"PD-C0022","price":89.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0656\/3771\/1972\/files\/110cable-3.png?v=1792819096"}],"url":"https:\/\/malaracing.com\/collections\/aracer-ecus-race-electronics.oembed","provider":"Mala Racing","version":"1.0","type":"link"}